Makita DP4010 Bedienungsanleitung

Makita Drehmaschine DP4010

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Makita DP4010 (36 Seiten) in der Kategorie Drehmaschine. Dieser Bedienungsanleitung war für 14 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/36

2-speed drill Instruction Manual

2 vitesses perceuse Manuel d’instructions

2-Gang Bohrmaschine Betriebsanleitung

2 velocità trapano Istruzioni per l’uso

2 snelheden boormachine Gebruiksaanwijzing

2 velocidad taladro Manual de instrucciones

Berbequim de 2 velocidades Manual de instruções

2-gears boremaskine Brugsanvisning

GR Τρυπάνι 2 ταχυτήτων Οδηγίες χρήσεως

DP4010

DP4011

1 2

3 4

5 6

7 8

ENGLISH

Explanation of general view

1 Lock button

2 Speed control screw

3 Switch trigger

4 Higher

5 Lower

6 Reversing switch lever

7 Arrow

8 Speed change knob

9 Grip base

10 Side grip (auxiliary handle)

11 Teeth

12 Protrusions

13 Chuck key

14 Sleeve

15 Ring

16 Depth gauge

17 Vent holes

SPECIFICATIONS

Model DP4010/DP4011

Speed

Capacities

Steel .................................................................................................... High: 8 mm Low: 13 mm

Wood ................................................................................................... High: 25 mm Low: 40 mm

No load speed (min–1) ............................................................................... High: 0 – 2,900 Low: 0 – 1,200

Overall length ............................................................................................ 347 mm

Net weight .................................................................................................. 2.3 kg

Safety class ................................................................................................ /II

• Due to our continuing program of research and devel-

opment, the specifications herein are subject to change

without notice.

• Specifications may differ from country to country.

• Weight according to EPTA-Procedure 01/2003

Intended use

The tool is intended for drilling in wood, metal and plastic.

Power supply

The tool should be connected only to a power supply of

the same voltage as indicated on the nameplate, and can

only be operated on single-phase AC supply. They are

double-insulated in accordance with European Standard

and can, therefore, also be used from sockets without

earth wire.

Safety hints

For your own safety, please refer to enclosed Safety

instructions.

SPECIFIC SAFETY RULES

GEB001-4

DO NOT let comfort or familiarity with product

(gained from repeated use) replace strict adherence

to drill safety rules. If you use this power tool

unsafely or incorrectly, you can suffer serious per-

sonal injury.

1. Use auxiliary handle(s), if supplied with the tool.

Loss of control can cause personal injury.

2. Hold power tool by insulated gripping surfaces,

when performing an operation where the cutting

accessory may contact hidden wiring or its own

cord. Cutting accessory contacting a “live” wire may

make exposed metal parts of the power tool “live”

and could give the operator an electric shock.

3. Always be sure you have a firm footing.

Be sure no one is below when using the tool in

high locations.

4. Hold the tool firmly.

5. Keep hands away from rotating parts.

6. Do not leave the tool running. Operate the tool

only when hand-held.

7. Do not touch the drill bit or the workpiece imme-

diately after operation; they may be extremely

hot and could burn your skin.

8. Some material contains chemicals which may be

toxic. Take caution to prevent dust inhalation

and skin contact. Follow material supplier safety

data.

SAVE THESE INSTRUCTIONS.

WARNING:

MISUSE or failure to follow the safety rules stated in

this instruction manual may cause serious personal

injury.

FUNCTIONAL DESCRIPTION

CAUTION:

• Always be sure that the tool is switched off and

unplugged before adjusting or checking function on the

tool.

Switch action (Fig. 1)

CAUTION:

• Before plugging in the tool, always check to see that

the switch trigger actuates properly and returns to the

“OFF” position when released.

To start the tool, simply pull the switch trigger. Tool speed

is increased by increasing pressure on the switch trigger.

Release the switch trigger to stop.

For continuous operation, pull the switch trigger and then

push in the lock button.

To stop the tool from the locked position, pull the switch

trigger fully, then release it.

A speed control screw is provided so that maximum tool

speed can be limited (variable). Turn the speed control

screw clockwise for higher speed, and counterclockwise

for lower speed.

Produktspezifikationen

Marke:	Makita
Kategorie:	Drehmaschine
Modell:	DP4010
Breite:	70 mm
Tiefe:	347 mm
Gewicht:	2200 g
Höhe:	220 mm
Eingangsleistung:	720 W
Energiequelle:	AC
Bohrdruchmesser in Stahl (max.):	13 mm
Bohrdurchmesser in Holz (max.):	40 mm
AC Eingangsspannung:	110 - 240 V
AC Eingangsfrequenz:	50 / 60 Hz
Kabellänge:	2.5 m
Ausgangsleistung:	360 W
Leerlaufdrehzahl (max.):	2900 RPM
Hammerbohren:	Nein
Spannzange Typ:	Schlüssel
Rücklauf:	Ja
Anzahl der Gänge:	2
Leerlaufgeschwindigkeit (1. Gang):	850 RPM
Leerlaufgeschwindigkeit (2. Gang):	2900 RPM