Makita DBS180Z Bedienungsanleitung
Makita
Schuurmachine
DBS180Z
Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Makita DBS180Z (12 Seiten) in der Kategorie Schuurmachine. Dieser Bedienungsanleitung war für 8 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet
Seite 1/12
![](https://manualstech.ams3.cdn.digitaloceanspaces.com/html/nl/makita/dbs180z/html/bg1.png)
INSTRUCTION MANUAL
Cordless Belt Sander
DBS180
ENGLISH: Original instructions
Read before use.
![](https://manualstech.ams3.cdn.digitaloceanspaces.com/html/nl/makita/dbs180z/html/bg2.png)
2 ENGLISH
SPECIFICATIONS
Model: DBS180
Belt size 9 mm x 533 mm
Belt speed 600 - 1,700 m/min
Overall length 500 mm *1
Rated voltage D.C. 18 V
Net weight 2.1 kg
*1. With abrasive belt and battery cartridge (BL1860B).
• Duetoourcontinuingprogramofresearchanddevelopment,thespecicationshereinaresubjecttochange
without notice.
• Specicationsmaydierfromcountrytocountry.
• Weight, with battery cartridge, according to EPTA-Procedure 01/2014
Applicable battery cartridge and charger
Battery cartridge BL1815N / BL1820 / BL1820B / BL1830 / BL1830B / BL1840 /
BL1840B / BL1850 / BL1850B / BL1860B
Charger DC18RC / DC18RD / DC18RE / DC18SD / DC18SE / DC18SF /
DC18SH
•
Some of the battery cartridges and chargers listed above may not be available depending on your region of residence.
WARNING: Only use the battery cartridges and chargers listed above. Use of any other battery cartridges
andchargersmaycauseinjuryand/orre.
Symbols
The followings show the symbols which may be used
for the equipment. Be sure that you understand their
meaning before use.
Read instruction manual.
Wear safety glasses.
Ni-MH
Li-ion
Only for EU countries
Do not dispose of electric equipment or
battery pack together with household waste
material!
In observance of the European Directives,
on Waste Electric and Electronic
Equipment and Batteries and Accumulators
and Waste Batteries and Accumulators
and their implementation in accordance
with national laws, electric equipment and
batteries and battery pack(s) that have
reached the end of their life must be col-
lected separately and returned to an envi-
ronmentally compatible recycling facility.
Intended use
The tool is intended for the sanding of large surface of
wood, plastic and metal materials as well as painted
surfaces.
Noise
The typical A-weighted noise level determined accord-
ing to EN62841-2-4:
Sound pressure level (L
pA) : 77 dB(A)
Uncertainty (K) : 3 dB(A)
NOTE: The declared noise emission value(s) has
been measured in accordance with a standard test
method and may be used for comparing one tool with
another.
NOTE: The declared noise emission value(s)
may also be used in a preliminary assessment of
exposure.
WARNING: Wear ear protection.
WARNING: The noise emission during actual
use of the power tool can dier from the declared
value(s) depending on the ways in which the
tool is used especially what kind of workpiece is
processed.
WARNING: Be sure to identify safety mea-
sures to protect the operator that are based on an
estimation of exposure in the actual conditions of
use (taking account of all parts of the operating
cycle such as the times when the tool is switched
o and when it is running idle in addition to the
trigger time).
Vibration
The vibration total value (tri-axial vector sum) deter-
mined according to EN62841-2-4:
Work mode: sanding metal plate
Vibration emission (a
h) : 2.5 m/s2 or less
Uncertainty (K) : 1.5 m/s
2
![](https://manualstech.ams3.cdn.digitaloceanspaces.com/html/nl/makita/dbs180z/html/bg3.png)
3 ENGLISH
NOTE: The declared vibration total value(s) has been
measured in accordance with a standard test method
and may be used for comparing one tool with another.
NOTE: The declared vibration total value(s) may also
be used in a preliminary assessment of exposure.
WARNING: The vibration emission during
actual use of the power tool can dier from the
declared value(s) depending on the ways in which
the tool is used especially what kind of workpiece
is processed.
WARNING: Be sure to identify safety mea-
sures to protect the operator that are based on an
estimation of exposure in the actual conditions of
use (taking account of all parts of the operating
cycle such as the times when the tool is switched
o and when it is running idle in addition to the
trigger time).
EC Declaration of Conformity
For European countries only
The EC declaration of conformity is included as Annex A
to this instruction manual.
SAFETY WARNINGS
General power tool safety warnings
WARNING: Read all safety warnings, instruc-
tions, illustrations and speciî‚¿cations provided
with this power tool. Failure to follow all instructions
listedbelowmayresultinelectricshock,reand/or
seriousinjury.
Save all warnings and instruc-
tions for future reference.
The term "power tool" in the warnings refers to your
mains-operated (corded) power tool or battery-operated
(cordless) power tool.
Work area safety
1. Keep work area clean and well lit. Cluttered or
dark areas invite accidents.
2. Do not operate power tools in explosive atmo-
spheres, such as in the presence of ammable
liquids, gases or dust. Power tools create sparks
which may ignite the dust or fumes.
3. Keep children and bystanders away while
operating a power tool. Distractions can cause
you to lose control.
Electrical safety
1.
Power tool plugs must match the outlet. Never modify
the plug in any way. Do not use any adapter plugs with
earthed (grounded) power tools. Unmodiedplugsand
matching outlets will reduce risk of electric shock.
2. Avoid body contact with earthed or grounded
surfaces, such as pipes, radiators, ranges and
refrigerators. There is an increased risk of elec-
tric shock if your body is earthed or grounded.
3. Do not expose power tools to rain or wet con-
ditions. Water entering a power tool will increase
the risk of electric shock.
4. Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the power tool.
Keep cord away from heat, oil, sharp edges
or moving parts. Damaged or entangled cords
increase the risk of electric shock.
5.
When operating a power tool outdoors, use an
extension cord suitable for outdoor use. Use of a cord
suitable for outdoor use reduces the risk of electric shock.
6. If operating a power tool in a damp location
is unavoidable, use a residual current device
(RCD) protected supply. Use of an RCD reduces
the risk of electric shock.
7. Power tools can produce electromagnetic
î‚¿elds (EMF) that are not harmful to the user.
However, users of pacemakers and other similar
medical devices should contact the maker of their
device and/or doctor for advice before operating
this power tool.
Personal safety
1. Stay alert, watch what you are doing and use
common sense when operating a power tool.
Do not use a power tool while you are tired or
under the inuence of drugs, alcohol or med-
ication. A moment of inattention while operating
powertoolsmayresultinseriouspersonalinjury.
2. Use personal protective equipment. Always
wear eye protection. Protective equipment such
as a dust mask, non-skid safety shoes, hard hat or
hearing protection used for appropriate conditions
willreducepersonalinjuries.
3. Prevent unintentional starting. Ensure the
switch is in the o-position before connecting
to power source and/or battery pack, picking
up or carrying the tool. Carrying power tools with
yourngerontheswitchorenergisingpowertools
that have the switch on invites accidents.
4. Remove any adjusting key or wrench before
turning the power tool on. A wrench or a key left
attached to a rotating part of the power tool may
resultinpersonalinjury.
5. Do not overreach. Keep proper footing and
balance at all times. This enables better control
of the power tool in unexpected situations.
6. Dress properly. Do not wear loose clothing or
jewellery. Keep your hair and clothing away
from moving parts.Looseclothes,jewelleryor
long hair can be caught in moving parts.
7. If devices are provided for the connection of
dust extraction and collection facilities, ensure
these are connected and properly used. Use of
dust collection can reduce dust-related hazards.
8.
Do not let familiarity gained from frequent use
of tools allow you to become complacent and
ignore tool safety principles. A careless action can
causesevereinjurywithinafractionofasecond.
9. Always wear protective goggles to protect
your eyes from injury when using power tools.
The goggles must comply with ANSI Z87.1 in
the USA, EN 166 in Europe, or AS/NZS 1336
in Australia/New Zealand. In Australia/New
Zealand, it is legally required to wear a face
shield to protect your face, too.
Produktspezifikationen
Marke: | Makita |
Kategorie: | Schuurmachine |
Modell: | DBS180Z |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Makita DBS180Z benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Schuurmachine Makita
![Makita](/images/logos/makita.png)
6 August 2024
![Makita](/images/logos/makita.png)
28 Juli 2024
![Makita](/images/logos/makita.png)
26 Juli 2024
![Makita](/images/logos/makita.png)
24 Juli 2024
![Makita](/images/logos/makita.png)
24 Juli 2024
![Makita](/images/logos/makita.png)
22 Juli 2024
![Makita](/images/logos/makita.png)
21 Juli 2024
![Makita](/images/logos/makita.png)
20 Juli 2024
![Makita](/images/logos/makita.png)
17 Juli 2024
![Makita](/images/logos/makita.png)
15 Juli 2024
Bedienungsanleitung Schuurmachine
- Schuurmachine Bosch
- Schuurmachine Flex
- Schuurmachine Parkside
- Schuurmachine Vonroc
- Schuurmachine AEG
- Schuurmachine Gastroback
- Schuurmachine Black And Decker
- Schuurmachine Cocraft
- Schuurmachine FERM
- Schuurmachine Ryobi
- Schuurmachine Skil
- Schuurmachine Topcraft
- Schuurmachine Trotec
- Schuurmachine Bort
- Schuurmachine DeWalt
- Schuurmachine Einhell
- Schuurmachine Festool
- Schuurmachine Worx
- Schuurmachine Tacklife
- Schuurmachine Hikoki
- Schuurmachine Hitachi
- Schuurmachine Hyundai
- Schuurmachine Kinzo
- Schuurmachine Kress
- Schuurmachine Max
- Schuurmachine Metabo
- Schuurmachine Stanley
- Schuurmachine Güde
- Schuurmachine Power Craft
- Schuurmachine Probuilder
- Schuurmachine Biltema
- Schuurmachine Meec Tools
- Schuurmachine Dremel
- Schuurmachine Proxxon
- Schuurmachine DURO
- Schuurmachine Far Tools
- Schuurmachine Silverline
- Schuurmachine Stomer
- Schuurmachine Bavaria
- Schuurmachine Milwaukee
- Schuurmachine Toolcraft
- Schuurmachine Fein
- Schuurmachine Craftsman
- Schuurmachine Powerplus
- Schuurmachine Rupes
- Schuurmachine Alpha Tools
- Schuurmachine Toledo
- Schuurmachine Ozito
- Schuurmachine Ridgid
- Schuurmachine Porter-Cable
- Schuurmachine VARO
- Schuurmachine Gamma
- Schuurmachine Global
- Schuurmachine Toolson
- Schuurmachine Wagner SprayTech
- Schuurmachine Meister Craft
- Schuurmachine RIKON
- Schuurmachine Einhell Bavaria
- Schuurmachine FIXIT
- Schuurmachine Black Decker
- Schuurmachine Pevec
Neueste Bedienungsanleitung für -Kategorien-
![Einhell](/images/pdf_free.png)
7 September 2024
![Skil](/images/pdf_free.png)
5 September 2024
![RIKON](/images/pdf_free.png)
5 September 2024
![Pevec](/images/pdf_free.png)
2 September 2024
![Worx](/images/pdf_free.png)
2 September 2024
![Einhell Bavaria](/images/pdf_free.png)
1 September 2024
![Einhell Bavaria](/images/pdf_free.png)
1 September 2024
![Einhell Bavaria](/images/pdf_free.png)
1 September 2024
![Einhell Bavaria](/images/pdf_free.png)
1 September 2024
![Einhell Bavaria](/images/pdf_free.png)
1 September 2024