Makita BO3711X Bedienungsanleitung
Lesen Sie kostenlos die đź“– deutsche Bedienungsanleitung fĂĽr Makita BO3711X (7 Seiten) in der Kategorie Sander. Dieser Bedienungsanleitung war fĂĽr 18 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet
Seite 1/7
PRODUCT
P 1/ 7
Model No.
Description
Specification
Standard equipment
Note: The standard equipment for the tool shown above may vary by country.
BO3710, BO3711
Finishing Sander
Models BO3710 and BO3711 have been developed as
the successor models of BO3700.
Additionally to the same lightweight design as BO3700,
BO3710 and BO3711 feature the following conveniences:
Lower total height from the base to the top of the grip
for easier handling and higher maneuverability
Ergonomic tool body for sure grip and easy handling
whether in single- or double-handed operation
Easy-to-operate paper clamp with rolled clamper’s edges
The specification difference between BO3710 and BO3711 is;
BO3710: Single speed model
BO3711: Variable speed model
Abrasive paper 93-120 .............. 1
Punch plate ................................ 1
Dust bag or Dust box ................ 1
Model No. BO3710 BO3711
Optional accessories
Abrasive papers 93-60, 93-80, 93-120, 93-180, 93-240 (Clamp type)
Abrasive papers 93-60, 93-80, 93-120, 93-180, 93-240 (Hook & loop type)
Punch plate
Hose complete 28-1.5
Pad complete (Clamp type)
Pad complete (Hook & loop type)
Filter set (including 5 non-woven cloth filters)
Dimensions: mm (")
Width (W)
Height (H)
Length (L) 253 (10)
92 (3-5/8)
154 (6-1/16)
L
H
W
Continuous Rating (W)
Voltage (V) Cycle (Hz) Input Output
70
Max. Output (W)
110
120
220
230
240
1.8
1.7
0.95
0.85
0.85
50/60
50/60
50/60
50/60
50/60
190
---
190
190
190
80
80
80
80
80
Current (A)
70
70
70
70
*1 Optional pad complete (Hook & loop type) is required.
*2 Weight according to EPTA-Procedure 01/2003
Specification
Pad size: mm (") 93 x 185 (3-5/8 x 7-1/4)
Double insulation
Net weight : kg (lbs)*2
Power supply cord: m (ft)
Abrasive paper size: mm (") 93 x 228 (3-5/8 x 9)
Yes
Yes
2.0 (6.6)
1.6 (3.5) 1.6 (3.5)
Orbits per minute: min. = opm 11,000-1
Strokes per minute: min. = spm 22,000-1
4,000 - 11,000
8,000 - 22,000
Variable speed control by dial No Yes
Paper fastening system Hook & loop
Clamp
Yes*1
TECHNICAL INFORMATION
CONCEPT AND MAIN APPLICATIONS
2 7P /
Repair
CAUTION: Repair the machine in accordance with “Instruction manual” or “Safety instructions”.
[1] NECESSARY REPAIRING TOOLS
[2] LUBRICATIONS
[3] DISASSEMBLY/ASSEMBLY
[3]-1. Armature
Fig. 2
Fig. 1
Code No. Description Use for
1R027 Bearing setting pipe 18-10.2 Removing Armature
1R029 Bearing setting pipe 23-15.2 Removing Balancer from Base
1R269 Bearing extractor Removing Ball bearings from Armature
1R286 Round bar for Arbor 12-50 Removing Ball bearing 6202DDW from Balancer
1R350 Ring 60 Holding Base when removing Balancer and Ball bearing 6202DDW
1R258 V block Holding Ball bearing 6202DDW when removing Balancer
No lubrication is required.
4x18 Tapping screw
(5pcs.)
1) Remove Top cover by unscrewing five 4x18 Tapping screws.
Then remove Brush holders with Carbon brushes and Lead wires.
Switch, Noise suppressor and Power supply cord can be replaced.
( )Fig. 1
2) Remove Pad complete by unscrewing four M4x10 Pan head screws.
O ring 53 may be attached to Pad complete. Do not lose O ring 53.
( )Fig. 2
3) Insert Slotted screwdriver between a rib of Base and Balancer to
stop moving of Balancer and remove M5x16 Countersunk head
screw. ( ) Fig. 3
4) Remove Base together with Balancer and Ball bearing 6202DDW.
( )Fig. 4
5) Remove Fan guide, Flat washer 8 and Fan 68 by unscrewing two
4x18 Tapping screws. ( )Fig. 5
6) After removing four 4x18 Tapping screws, tap Motor housing with
Plastic hammer as illustrated in . Armature can be removed Fig. 6
together with Bearing box.
M4x10 Pan head
screw (4pcs.)
Top cover
Brush
holders
Pad
complete
O ring 53
Base
Fig. 5 Fig. 6
Fig. 3 Fig. 4
DISASSEMBLING
Slotted screwdriver
Phillips screwdriver
Balancer
Rib of Base
Ball bearing 6202DDW
Balancer
M5x16 Countersunk
head screw
4x18 Tapping screw
(2pcs.)
4x18 Tapping screw
(4pcs.)
Base
Fan guide
Fan 68
Flat washer 8
Flat washer 8
Armature
Motor housing
Bearing box
[3] DISASSEMBLY/ASSEMBLY
[3]-1. Armature (cont.)
DISASSEMBLING
P / 3 7
Repair
Fig. 7A Fig. 7B
Fig. 8 Fig. 9
7) Armature can be removed from Bearing box by tapping the shaft with plastic hammer. (Fig. 7A)
Note: When it is difficult to remove Armature in the above manner, put 1R027 on Ball bearing 6200DDW and press
down 1R027 as illustrated in Fig. 7B.
8) Apply 1R269 to the clearance between Insulation washer and Ball bearing 607ZZ, and set the legs of 1R269 to Arbor
press to prevent the jaws of 1R269 from being slipped off. Ball bearing 607ZZ can be removed with vise and 1R269.
( )Fig. 8
9) Install M5x16 Countersunk head screw temporarily to the Armature shaft, and then remove Ball bearing 6200DDW
without damage to the thread of Armature shaft. ( Flat washer 10 can be removed.Fig. 9)
1R027
Ball bearing 607ZZ
Ball bearing
6200DDW
Insulation
washer
Flat washer 10
1R269
M5x16 Countersunk head screw
Ball bearing 6200DDW
Ball bearing
6200DDW
Flat washer 10
protrusion
Ball bearing
6200DDW
Take the disassembling step in reverse.
Note: 1) Do not fail to set Flat washer 10 on the drive end of Armature shaft before pressfit Ball bearing 6200DDW in place.
(Figs. ) Face the protrusion of Flat washer 10 to Ball bearing 6200DDW.Figs. 9 and 8
2) Be sure to install O ring 53 into Base. ( )Fig. 2
3) Flat washer 8 has to be put between Ball bearing 6202DDW and Fan 68. ( )Fig. 4
ASSEMBLING
Produktspezifikationen
| Marke: | Makita |
| Kategorie: | Sander |
| Modell: | BO3711X |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Makita BO3711X benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Sander Makita
13 September 2024
2 September 2024
20 August 2024
15 August 2024
6 August 2024
4 August 2024
1 August 2024
31 Juli 2024
29 Juli 2024
29 Juli 2024
Bedienungsanleitung Sander
- Sander Bosch
- Sander Flex
- Sander Parkside
- Sander Vonroc
- Sander AEG
- Sander Arendo
- Sander Gastroback
- Sander Black And Decker
- Sander Cocraft
- Sander FERM
- Sander Ryobi
- Sander Skil
- Sander Topcraft
- Sander Trotec
- Sander Hilti
- Sander Bort
- Sander DeWalt
- Sander Einhell
- Sander Elu
- Sander Festool
- Sander Mafell
- Sander Maktec
- Sander Worx
- Sander Tacklife
- Sander Hikoki
- Sander Hitachi
- Sander Hyundai
- Sander Hazet
- Sander Kinzo
- Sander Kress
- Sander Max
- Sander Metabo
- Sander Stanley
- Sander GĂĽde
- Sander Power Craft
- Sander Scheppach
- Sander Probuilder
- Sander Workzone
- Sander Biltema
- Sander Meec Tools
- Sander Dremel
- Sander Fieldmann
- Sander King Craft
- Sander Proxxon
- Sander Westfalia
- Sander Dedra
- Sander DURO
- Sander Far Tools
- Sander Silverline
- Sander Holzmann
- Sander Stomer
- Sander Batavia
- Sander Matrix
- Sander Bavaria
- Sander BrĂĽder Mannesmann
- Sander Milwaukee
- Sander Toolcraft
- Sander Fein
- Sander Craftsman
- Sander Powerplus
- Sander Rupes
- Sander Alpha Tools
- Sander Toledo
- Sander Ozito
- Sander Ridgid
- Sander Porter-Cable
- Sander VARO
- Sander Duro Pro
- Sander Gamma
- Sander Global
- Sander Protool
- Sander Toolson
- Sander Wagner SprayTech
- Sander Meister Craft
- Sander Truper
- Sander RIKON
- Sander Einhell Bavaria
- Sander Tryton
- Sander FIXIT
- Sander Ribimex
- Sander Black Decker
- Sander Pevec
- Sander Handwerk
- Sander TAURUS Titanium
- Sander Stalco
Neueste Bedienungsanleitung fĂĽr -Kategorien-
15 Oktober 2024
8 Oktober 2024
7 Oktober 2024
5 Oktober 2024
5 Oktober 2024
4 Oktober 2024
4 Oktober 2024
4 Oktober 2024
3 Oktober 2024
1 Oktober 2024