Makita 4101RH Bedienungsanleitung

Makita Säge 4101RH

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Makita 4101RH (12 Seiten) in der Kategorie Säge . Dieser Bedienungsanleitung war für 19 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/12

ENGLISH (Original instructions)

INSTRUCTION MANUAL

IMPORTANT: Read Before Using.

Cutter

4101RH

003504

ENGLISH (Original instructions)

SPECIFICATIONS

Model 4101RH

Wheel diameter 125 mm

Max. wheel thickness 2.1 mm

90° 41.5 mm

Max. cutting capacities 45° 26 mm

Max. permitted pressure of water supply 0.14 MPa

Rated speed (n) / No load speed (n

) 13,800 (min-1)

Overall length 236 mm

Net weight 3.0 kg

Safety class Class I

• Due to our continuing program of research and development, the specifications herein are subject to change without notice.

• Specifications may differ from country to country.

• Weight according to EPTA-Procedure 01/2003

END104-6

Symbols

The following show the symbols used for the equipment.

Be sure that you understand their meaning before use.

･ Read instruction manual.

･ Wear safety glasses.

･ The tool should be used on horizontal

surfaces.

･ Do not use the tool upside down.

･ The tool should be used with the PRCD

(Portable Residual Current Device).

･ Do not use the abrasive cut-off wheel.

･ After use, brush off accumulation of

dust on the base.

･ Do not use the saw blade.

･ Only for EU countries

Do not dispose of electric equipment

together with household waste material!

In observance of the European

Directive, on Waste Electric and

Electronic Equipment and its

implementation in accordance with

national law, electric equipment that

have reached the end of their life must

be collected separately and returned to

an environmentally compatible

recycling facility.

ENE023-2

Intended use

The tool is intended for cutting in brick, concrete and

stone.

ENF001-1

Power supply

The tool should be connected only to a power supply of

the same voltage as indicated on the nameplate, and

can only be operated on single-phase AC supply. This

tool should be grounded while in use to protect the

operator from electric shock. Use only three-wire

extension cords which have three-prong grounding-type

plugs and three-pole receptacles which accept the tool's

plug.

ENG905-1

Noise

The typical A-weighted noise level determined according

to EN60745:

Sound pressure level (L

pA ) : 98 dB (A)

Sound power level (L

WA) : 109 dB (A)

Uncertainty (K) : 3 dB (A)

Wear ear protection

ENG900-1

Vibration

The vibration total value (tri-axial vector sum)

determined according to EN60745:

Work mode : concrete cutting

Vibration emission (ah) : 5.5 m/s2

Uncertainty (K) : 1.5 m/s2

ENG901-1

• The declared vibration emission value has been

measured in accordance with the standard test

method and may be used for comparing one tool

with another.

• The declared vibration emission value may also be

used in a preliminary assessment of exposure.

WARNING:

•

The vibration emission during actual use of the power

tool can differ from the declared emission value

depending on the ways in which the tool is used.

• Be sure to identify safety measures to protect the

operator that are based on an estimation of

exposure in the actual conditions of use (taking

account of all parts of the operating cycle such as

the times when the tool is switched off and when it

is running idle in addition to the trigger time).

ENH101-18

For European countries only

EC Declaration of Conformity

Makita declares that the following Machine(s):

Designation of Machine:

Cutter

Model No./ Type: 4101RH

Conforms to the following European Directives:

2006/42/EC

They are manufactured in accordance with the following

standard or standardized documents:

EN60745

The technical file in accordance with 2006/42/EC is

available from:

Makita, Jan-Baptist Vinkstraat 2, 3070, Belgium

10.4.2014

000331

Yasushi Fukaya

Director

Makita, Jan-Baptist Vinkstraat 2, 3070, Belgium

GEA005-3

General Power Tool Safety

Warnings

WARNING Read all safety warnings and all

instructions. Failure to follow the warnings and

instructions may result in electric shock, fire and/or

serious injury.

Save all warnings and

instructions for future reference.

The term "power tool" in the warnings refers to your

mains-operated (corded) power tool or battery-operated

(cordless) power tool.

Work area safety

1. Keep work area clean and well lit. Cluttered or

dark areas invite accidents.

2. Do not operate power tools in explosive

atmospheres, such as in the presence of

flammable liquids, gases or dust. Power tools

create sparks which may ignite the dust or fumes.

3. Keep children and bystanders away while

operating a power tool. Distractions can cause

you to lose control.

Electrical safety

4. Power tool plugs must match the outlet. Never

modify the plug in any way. Do not use any

adapter plugs with earthed (grounded) power

tools. Unmodified plugs and matching outlets will

reduce risk of electric shock.

5. Avoid body contact with earthed or grounded

surfaces such as pipes, radiators, ranges and

refrigerators. There is an increased risk of

electric shock if your body is earthed or grounded.

6. Do not expose power tools to rain or wet

conditions. Water entering a power tool will

increase the risk of electric shock.

7. Do not abuse the cord. Never use the cord for

carrying, pulling or unplugging the power tool.

Keep cord away from heat, oil, sharp edges or

moving parts. Damaged or entangled cords

increase the risk of electric shock.

8. When operating a power tool outdoors, use an

extension cord suitable for outdoor use. Use of

a cord suitable for outdoor use reduces the risk of

electric shock.

9. If operating a power tool in a damp location is

unavoidable, use a residual current device

(RCD) protected supply. Use of an RCD reduces

the risk of electric shock.

10. Use of power supply via a RCD with a rated

residual current of 30mA or less is always

recommended.

Personal safety

11. Stay alert, watch what you are doing and use

common sense when operating a power tool.

Do not use a power tool while you are tired or

under the influence of drugs, alcohol or

medication. A moment of inattention while

operating power tools may result in serious

personal injury.

12. Use personal protective equipment. Always

wear eye protection. Protective equipment such

as dust mask, non-skid safety shoes, hard hat, or

hearing protection used for appropriate conditions

will reduce personal injuries.

13. Prevent unintentional starting. Ensure the

switch is in the off-position before connecting

to power source and/or battery pack, picking

up or carrying the tool. Carrying power tools

with your finger on the switch or energising power

tools that have the switch on invites accidents.

Produktspezifikationen

Marke:	Makita
Kategorie:	Säge
Modell:	4101RH
Breite:	220 mm
Tiefe:	171 mm
Gewicht:	5200 g
Produktfarbe:	Black, Blue
Eingangsleistung:	860 W
Energiequelle:	AC
AC Eingangsspannung:	230 V
Geräuschpegel:	109 dB
Leerlaufdrehzahl (max.):	13800 RPM
Schnitttiefe bei (90º):	34 mm
Schnitttiefe bei 45º:	21 mm
Sägeblatt enthalten:	Ja
Diamantscheibe:	Ja
Bohrgröße Diamantscheibe:	20 mm
Durchmesser der Diamantscheibe:	110 mm
Klingenaustauschschlüssel:	Ja