Mackie DL Dante Expansion Card Bedienungsanleitung

Mackie Lautsprecher DL Dante Expansion Card

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Mackie DL Dante Expansion Card (1 Seiten) in der Kategorie Lautsprecher. Dieser Bedienungsanleitung war für 19 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/1
Oct 2013 • All questions, answers and specifications subject to change.www.mackie.com/support/
QUICK STEPS TO WIRELESS SUCCESS
QUICK STEPS TO WIRELESS SUCCESS
Full instructions for wireless setup for the DL Series Mixers can be found in the Quick Start and
Reference Guide. But if you want to get up and running quickly by reading as few words as possible,
this document is for you.
1. DL1608 or DL806 Mixer
2. Wi-Fi router (please see page 24 of the Reference Guide for more information)
3. Ethernet cable
4. iPad (with Master Fader app installed)
5. Signal source to plug into the DL1608 or DL806 (microphone, iPod, string-quartet, etc.)
You will need the following in order to make your DL Series Mixers and Wi-Fi router work correctly.
We hope that this helps you with your questions. For more information regarding DL Series Mixers please refer to the
Quick Start or Reference Guide. These are both easily accessed directly from Master Fader by going to the Tools menu and
choosing the Help tab or by visiting the DL Series website.
Step 1: Unbox the DL Series mixer, plug the power cable into
the back of the mixer (plug it into the wall at this time as
well) and connect signal source. Do turn the mixer on NOT
at this time.
Step 2: Plug the Wi-Fi router into its power cable (plug it
into the wall at this time as well). Most of the default router
settings will work to connect to the mixer using Wi-Fi but you
might need to configure your wireless router before you can
connect to the DL Series hardware (please see the manual
for your specific router for information).
Step 3: Plug the Ethernet cable into the mixer and Wi-Fi
router. Make sure you are using a LAN port and not a WAN
port on the Wi-Fi router.
Step 4: Turn on the Wi-Fi router first, wait for it to completely
boot up and then turn on the DL Series mixer.
Step 5: In the iPad’s Wi-Fi settings page, select the name of
the wireless network you created. This might be the default
name of the router or a custom name if you configured
the network setting on the router. Make sure the correct
network is selected.
Step 6: Slide the iPad into the dock of the DL Series mixer.
Step 7: Launch the Master Fader app assuming you have
already downloaded it from the App Store.
Step 8: If this is the first time you connected to the
DL Series mixer, the mixer will go through a firmware
update upon boot-up. The firmware update can take up to
15 minutes. (If you have previously completed the firmware
update, move on to the next step.)
Step 9: Click the Gear icon to display the Tools menu and
choose the Devices tab.
Step 10: There should be three sections listed: Offline,
Wired and Wireless. At this point the Wired DL Series mixer
should be selected and you can leave the Tools menu and
start using the DL Series mixer hardware while docked. It is a
good idea to connect a microphone or another signal source
to ensure that you see channel meters and can control levels.
Step 11: Go back to the Tools menu and with the Devices
tab still open undock the iPad from the mixer and select
the Wireless DL1608 or DL806 from the devices list.
At this point you should now be able to control the DL1608
mixer wirelessly.


Produktspezifikationen

Marke: Mackie
Kategorie: Lautsprecher
Modell: DL Dante Expansion Card

Brauchst du Hilfe?

Wenn Sie Hilfe mit Mackie DL Dante Expansion Card benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Lautsprecher Mackie

Bedienungsanleitung Lautsprecher

Neueste Bedienungsanleitung für -Kategorien-