Lorus W100 Bedienungsanleitung
Lorus
betrachten
W100
Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Lorus W100 (3 Seiten) in der Kategorie betrachten. Dieser Bedienungsanleitung war für 31 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet
Seite 1/3
INSTRUCTION MANUAL
CAL. W100 (RBM SERIES)
NREW100 01-99
■CHARACTERISTICS
1. Time/calendar display: Hour, minutes,
seconds, month, date and day of the week.
• Fully automatic calendar: Calendar adjusts
automatically for odd and even months including
February of leap years from the year 1998 to
the end of 2048.
•Time indication: Changeover between
12- and 24-hour indications is possible.
2. Stopwatch: Measures up to10 hours with 1/
100 second readout.
•Lap time measurement: When the fastest
lap time is measured, a beep sounds and the
display is illuminated.
•Auto start function: The stopwatch can be
set to start automatically at a desired time .
3. Countdown timer:
•Preset timer: Five different lengths of time
(3, 10, 15, 30 and 45 minutes) have been
preset for the timer.
•Adjustable timer: Up to 23 hours and 59
minutes can be set in minute increments.
4. Daily alarm: The alarm can be set to ring on
a 24-hour basis.
•Hourly time signal: Can be set to ring
every hour on the hour.
5. Dual time: Time of a different time zone can
be set and displayed.
6. Illuminating light: The light illuminates
the display in the dark.
1. Press button “A” to show the time/calendar
display.
2. Press button “A” for 2 seconds to show the
time/calendar setting display. The second
digits start flashing.
3. Selection of the digits to be adjusted (flashing)
is made in the following order by pressing
button “B”.
Date Month
4. Press button “C” to set the flashing digits.
One digit is advanced with each press of
button “C”. Digits except seconds and 12-
/24-hour indication move quickly by keeping
button “C” pressed.
5. After all the adjustments are completed,
press button “A” to return to the time/
calendar display.
Notes:
1. When setting the hour digits in the 12-
hour indication, check that AM/PM is properly
set. In the 24-hour indication, there is no
indication.
2. Once the year, month and date have been
set, the day of the week is set automatically.
3. If the watch is left untouched in the time/
calendar setting display with the digits
flashing, it will automatically return to the
time/calendar display in 2 minutes.
Seconds setting
When the seconds digits are flashing, press
button “C” in accordance with a time signal.
The seconds are reset to “00” and start immediately.
When the seconds count any number from
“30” to “59” and button “C” is pressed, one
minute is added and the seconds are immediately
reset to “00”.
Year
Hour
Minutes
Seconds
12-/24-hour
indication
→→→
→→→
→
■HOW TO USE THE STOPWATCH
• The stopwatch can measure up to 10 hours
in 1/100 seconds.
* Even if the stopwatch display is changed to
another while the measurement is in prog-
ress, it continues counting properly. After
the stopwatch is used, however, be sure to
reset it as the battery energy is consumed
enormously to shorten the battery life.
B
C
A
Minutes Seconds 1/100 seconds
Stopwatch
display mark
Stopwatch Operation
Press button “A” to show the stopwatch display.
■BUTTONS AND DISPLAYS
MODE
START
LAP
LIGHT
AM/PM
mark
Hour Minutes
Light
button
Alarm
mark
Hourly time
signal mark
Day
Seconds
A
B
Month
Date
The selection of the display can be made in the
following order with each press of button “A”.
Timer
display
A
A
Stopwatch
display
Alarm
display
Time/calendar
display
AA
With each press of button “B” in the time/calen-
dar display, the display changes over between
the time/calendar and dual time alternately.
Time/calendar
display Dual time
display
B
I
NSTRUCTION
M
ANUAL
CAL. W100 (RBM SERIES)
NREW100 01-99
Month
Hour Minutes Seconds
B
C
Day Date
AM/PM
mark
A
■
HOW TO SET THE TIME/CALENDAR
Start Stop
Restart
Stop
Accumulated elapsed time measurement
BB BBC
Reset
Accumulate repeatedly by
pressing button “B”.
Lap time measurement
Start B
• “Lap time” refers to an elapsed time required
to cover a given section of the whole distance.
Lap 1 CC
Stop
Reset
BC
Note: When a lap time measured is the fastest
among the lap times previously measured,
a beep rings and the display is illuminated.
** Can repeat by pressing button “C”.
Lap 2
**
C
Auto Start Function
• By setting the amount of time before measurement
is started, the stopwatch starts automatically
at a desired time.
• Up to 15 minutes and 59 seconds can be set
in seconds.
Note: The auto start function and timer cannot
be used simultaneosly.
1) Auto start time setting
3. If the watch is left untouched in the alarm
setting display with the digits flashing, it
will automatically return to the alarm display
in 2 minutes.
1
2
3
4
Hourly time
signal mark
• With each press of button “B” in the alarm
display, the engagement and disengagement
of the alarm and hourly time signal are
made as follows.
Engagement/disengagement of the
alarm and hourly time signal
■HOW TO SET THE DUAL TIME
Time of a different time zone can be set and
displayed together with the time you have set
in “HOW TO SET THE TIME/CALENDAR”.
• At the designated time, the alarm rings
and the display is illuminated for 20 seconds
and stops. To stop them manually, press
button “A”, “B” or “C”.
• The alarm can be tested by keeping button
“C” pressed in the alarm display.
Neither engaged
Alam engaged
Both engaged
Hourly time signal engaged
Alarm mark
B
C
Dual time
display mark
“A” (AM)/“P”
(PM) mark
Hour Minutes
A
1. Press button “A” to show the time/calendar
display.
2. Press button “B” to show the dual time
display. With each press of the button,
the display changes over between the time/
calendar and dual time alternately.
3. Press button “A” for 2 seconds to show the
dual time setting display.
4. To set the digits, refer to “HOW TO SET
THE TIME/CALENDAR”.
1. After stopping the stopwatch or resetting
it, press button “A” for 2 seconds to show
the auto start time setting display. The
minute digits start flashing.
2. Press button “B” to select the digits to be
adjusted (flashing).
Minutes Seconds
3. Press button “C” to set the flashing digits.
One digit is advanced with each press of
the button. The digits move quickly by
keeping the button pressed.
4. After all the adjustments are completed,
press button “A” to show the auto start
display. The auto start time you have set
remains displayed in the upper row.
Note: If the watch is left untouched in the auto
start time setting display with the digits
flashing, it will automatically return to
the auto start display in 2 minutes.
B
C
A
→
→
SecondsMinutes
2) How to use the auto start function
Stopwatch
measurement
Auto start time
(countdown)
B
1. Press button “B” in the auto start display.
The countdown of the set time will be
started. With each press of the button,
the countdown is started and stopped alternately.
The stopwatch starts measuring when the
set time is up.
* At 3, 2 and 1 minutes, 30, 20, 10, 3, 2 and
1 seconds before the stopwatch measurement
is started, a beep sounds and the light
illuminates.
2. After the stopwatch is started, operate the
buttons as explained in “Stopwatch Operation”.
1. Press button “A” to show the alarm display.
2. Press button “A” for 2 seconds to show the
alarm setting display. The hour digits
(and “A”/“P” mark if the time is set in the
12-hour indication) start flashing.
3. Press button “B” to select the digits to be
adjusted (flashing).
Notes:
1. When the time function is displayed in the
24-hour indication, the alarm is also displayed
in the 24-hour indication.
2. When setting the hour digits in the 12-
hour indication, check that “A” (AM)/“P ”
(PM) mark is correctly set. In the 24-hour
indication, there is no indication.
■HOW TO SET THE ALARM
B
Alarm display markMinutesHour
AC
“A”(AM)/
“P” (PM)
mark
Hourly time
signal mark
Alarm
mark
4. Press button “C” to set the digits. One
digit is advanced with each press of the
button. The digits move quickly by keeping
the button pressed.
5. After all the adjustments are completed,
press button “A” to return to the alarm
display.
→
→
MinutesHour
•Two types of timers (adjustable timer and
preset timer) are available.
1. How to Use the Preset Timer
•Five different lengths of time (3, 10, 15, 30
and 45 minutes) have been preset for the
timer.
Selection of the preset time
1. Press button “A” to show the timer display.
2. Press button “C” to select the desired preset
time. Selection of the preset time is made
in the following order by pressing button
“C”. 15 min.30 min.45 min.
10 min.3 min.
Preset timer operation
Press the button in the following order.
Time-up
Stop
Restart
Warning
sound
beeps
Start
Restart and stop of the
timer can be repeated by
pressing button “B”.
BBB
C
B
A
Adjustable
timer
→
→→
→
→→
Timer display
mark
Hour Minutes
■HOW TO USE THE COUNTDOWN
TIMER
*When the set time is up, a warning sound
beeps and the display is illuminated for 10
seconds. To stop them manually, press button
“A”, “B” or “C”.
*At 3, 2 and 1 minutes, 30, 20, 10, 3, 2 and 1
seconds before the set time is up, a beep
sounds and the light illuminates.
2. How to Use the Adjustable Timer
•Adjustable timer can be set up to 23 hours
and 59 minutes in minutes.
Adjustable timer setting
1. Press button “A” to show the timer display.
2. Press button “C” to select the adjustable
timer. Selection of the adjustable timer
and preset timers are made in the following
order by pressing button “C”.
15 min.30 min.45 min. →→
10 min.3 min.
Adjustable
timer
→
→→
→
3. Press button “A” for 2 seconds to show the
adjustable timer setting display. The hour
digits start flashing.
4. Selection of the digits to be adjusted (flashing)
is made in the following order by pressing
button “B”.
Hour Minutes
→
→
5. Press button “C” to set the digits. One
digit is advanced with each press of the
button. The digits move quickly by keeping
the button pressed.
6. After all the adjustments are completed, press
button “A” to return to the timer display.
Note: If the watch is left untouched in the
adjustable timer setting display with
the digits flashing, it will automatically
return to the timer display in 2 minutes.
Adjustable timer operation
Refer to “Preset timer operation” above.
■LUMIBRITE WATCH
(dial, hands, buttons, case, bezel,
strap, etc.)
✩If your watch is a LORUS LUMIBRITE watch,
it has following features.
LORUS LUMIBRITE watches absorb and store
light energy from natural and artificial light
sources and emit light in the dark. They are
made of environmentally friendly material,
and therefore, are harmless to human beings
and the environment.
• With a full charge, LORUS LUMIBRITE
watches glow in the dark hours longer than
conventional luminous watches of this type.
If exposed to a light of more than 500 lux
(i.e., the brightness of a typical office) for
approximately 10 minutes, or direct sunlight
for 2 minutes, they will glow for hours.
• Since LORUS LUMIBRITE watches emit
the light they store, the brightness will
decrease gradually over time. The length
of time they will glow may also differ slightly
depending on such factors as the brightness
of and distance from the light source used
to charge the watch.
■ILLUMINATING LIGHT
When the light button is pressed and released
in the time/calendar, stopwatch, alarm, dual
time or timer display, the light illuminates
the display in red, green and both colors for
5 seconds for easy viewing in the dark.
Light
button
■ViViDiGi
ViViDiGi is a new type of liquid crystal panel that
makes possible various colors and high contrast.
• Excellent light reflection and transmission
make the display bright and clear.
• Various color options are available.
• Either the whole panel or the displayed
data only can be illuminated.
* Features vary in different models.
■BATTERY CHANGE
The miniature lithium battery PANASONIC
CR2025,which powers your watch should last
approximately 2.5 years. However, because
it is inserted at the factory, the actual life of
the battery once in your possession may be
less than the specified period. Be sure to
replace the battery to prevent any possible
malfunction as soon as it runs down. To
replace the battery, we recommend taking
the watch to a local watch repair shop.
Note: If the alarm is used for more than 20
seconds a day and/or the illuminating
light for more than 5 seconds a day,
the battery life may be less than the
specified period.
■CARE OF YOUR LORUS WATCH
• BATTERY
CAUTION
Do not expose the old battery to
fire or recharge it. Keep it at a
place beyond the reach of chil-
dren. If a child swallows it, consult
a doctor immediately.
• WATER RESISTANT
No
indication
WATER
RESISTANT
WATER
RESISTANT
(50 M/5 BAR)*
WATER
RESISTANT
100 M/
10 BAR or
above
Condition
of use
Accidental
contact with
water, such
as splashes
and rain
Swimm-
ing and
taking a
shower
Skin
diving Scuba
diving
Indica-
tion on
the dial/
case back
NO NO NO NO
YES YES NO NO
YES NO NO NO
YES YES YES NO
()
*
* If your watch is 200 M/20 BAR, 100 M/10
BAR or 50 M/5 BAR water resistant, it is so
indicated on the dial/case back.
•Do not operate the buttons when the watch
is wet.
•If the watch is exposed to salt water, rinse it in
fresh water and then wipe it thoroughly dry.
Caution:
Leather straps are not water resistant except
so indicated, even if the watch head is water
resistant.
• ALLERGIC REACTION
Because the case and band touch the skin
directly, it is important to clean them regularly.
If not, shirt sleeves may be stained and
those with delicate skin may develop a
rash. Please wear the watch with some
play to avoid any possible allergic reaction.
If you develop a rash on your wrist, stop
wearing and consult a physician.
• MAGNETISM
Your watch will not be affected by mag-
netism generated by household electric
appliances.
• SHOCKS AND VIBRATIONS
Your watch may be worn for normal sports
activities, but be careful not to drop it or
hit it on hard surfaces.
• TEMPERATURE
Your watch is preadjusted so that constant
accuracy may be insured at normal tem-
perature.
■SERVICE
When your LORUS watch requires repair
or servicing, please see the enclosed
WARRANTY/GUARANTEE.
Printed in Hong Kong
Produktspezifikationen
| Marke: | Lorus |
| Kategorie: | betrachten |
| Modell: | W100 |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Lorus W100 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung betrachten Lorus
24 August 2024
22 August 2024
21 August 2024
21 August 2024
21 August 2024
20 August 2024
19 August 2024
19 August 2024
19 August 2024
19 August 2024
Bedienungsanleitung betrachten
- betrachten Medion
- betrachten Clas Ohlson
- betrachten Beper
- betrachten Velleman
- betrachten IKEA
- betrachten Technaxx
- betrachten ADE
- betrachten Auriol
- betrachten Eurochron
- betrachten Irox
- betrachten MarQuant
- betrachten Prologue
- betrachten Renkforce
- betrachten Braun
- betrachten Eta
- betrachten Polar
- betrachten Alpina
- betrachten Pyle
- betrachten Mitsubishi
- betrachten Lynx
- betrachten Topcom
- betrachten Speedo
- betrachten Seiko
- betrachten Calypso
- betrachten Fossil
- betrachten Garmin
- betrachten Jaguar
- betrachten Lotus
- betrachten Michael Kors
- betrachten Skagen
- betrachten Bushnell
- betrachten Casio
- betrachten Citizen
- betrachten Alessi
- betrachten Dugena
- betrachten Krontaler
- betrachten Mondaine
- betrachten Epson
- betrachten Westfalia
- betrachten Suunto
- betrachten BML
- betrachten Swatch
- betrachten Tissot
- betrachten Adidas
- betrachten Ascot
- betrachten Asics
- betrachten Bruno Söhnle
- betrachten Edox
- betrachten Maurice Lacroix
- betrachten Huawei
- betrachten Omega
- betrachten Kogan
- betrachten TomTom
- betrachten Grand Seiko
- betrachten Armani
- betrachten Bering
- betrachten Breitling
- betrachten Breo
- betrachten Bulova
- betrachten Certina
- betrachten Christiaan Van Der Klaauw
- betrachten Daniel Steiger
- betrachten Davis
- betrachten Detomaso
- betrachten Diesel
- betrachten Ebel
- betrachten Elysee
- betrachten Executive
- betrachten Festina
- betrachten Fila
- betrachten Freestyle
- betrachten Gant
- betrachten Gc
- betrachten Girard-Perregaux
- betrachten Guess
- betrachten Hamilton
- betrachten Holzkern
- betrachten Hugo Boss
- betrachten Ice Watch
- betrachten Invicta
- betrachten IWC
- betrachten Jacques Lemans
- betrachten Junghans
- betrachten Lacoste
- betrachten Longines
- betrachten Luminox
- betrachten Olivia Burton
- betrachten Orient
- betrachten Pulsar
- betrachten Puma
- betrachten Sinn
- betrachten Slazenger
- betrachten Stührling
- betrachten Swiza
- betrachten Timberland
- betrachten Timex
- betrachten TMI
- betrachten Torgoen
- betrachten Tudor
- betrachten TW Steel
- betrachten Versace
- betrachten Zenith
- betrachten Victorinox
- betrachten ETT
- betrachten Boss
- betrachten La Crosse Technology
- betrachten Oregon Scientific
- betrachten Spin Master
- betrachten TicWatch
- betrachten Dakota
- betrachten Danish Design
- betrachten Digi-tech
- betrachten ESQ
- betrachten Ferrari
- betrachten GC Watches
- betrachten Haffstreuner
- betrachten Inter-Quartz
- betrachten Just
- betrachten Kalenji
- betrachten La Crosse
- betrachten Lambretta
- betrachten Marc Jacobs
- betrachten Meister Anker
- betrachten Misfit
- betrachten Movado
- betrachten Naitica
- betrachten Naviforce
- betrachten Nike
- betrachten QQ
- betrachten Rado
- betrachten Rodania
- betrachten Rolex
- betrachten Ronda
- betrachten Skmei
- betrachten Spinnaker
- betrachten Tauchmeister
- betrachten Timer
- betrachten TimeStyle
- betrachten Tommy Hilfiger
- betrachten Uri Minkoff
- betrachten Xonix
- betrachten Shinola
- betrachten Philip Watch
- betrachten Brera
- betrachten Lucien Picard
- betrachten So & Co
- betrachten Nautica
- betrachten Obaku
- betrachten Christopher Ward
- betrachten Hublot
- betrachten Tikkers
- betrachten Audemars Piguet
- betrachten Pilgrim
- betrachten Lars Larsen
- betrachten Klaus Kobec
- betrachten DMC
- betrachten Raketa
- betrachten Balmain
- betrachten Wonky Monkey
- betrachten Iron Annie
- betrachten Julie Julsen
- betrachten KRAEK
- betrachten PAUL HEWITT
- betrachten Radley London
- betrachten PANERAI
- betrachten Zeppelin
- betrachten Hype
- betrachten HYT
Neueste Bedienungsanleitung für -Kategorien-
9 Oktober 2024
7 Oktober 2024
7 Oktober 2024
6 Oktober 2024
6 Oktober 2024
5 Oktober 2024
4 Oktober 2024
4 Oktober 2024
4 Oktober 2024