Lorus R2383HX9 Bedienungsanleitung

Lorus betrachten R2383HX9

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Lorus R2383HX9 (2 Seiten) in der Kategorie betrachten. Dieser Bedienungsanleitung war für 4 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/2
C H A R A C T ERI S T I C S
1. Time/Calendar Display: Hour, minute, second,
month, date and day of the week
2. Time Indication: Choice of 12-hour display
format with PM indicator or 24-hour display
format is available.
3. Stopwatch: The stopwatch can measure up
to 23 hours 59 minutes and 59 seconds in 1/100-
second increments. Lap time measurement is
available.
4. Timer: The countdown timer can be set up to 23
hours 59 minutes and 59 seconds.
5. Alarm: The alarm can be set to sound at the
designated time on a 24-hour basis.
6. Second Time Zone:
Time in a different time zone
can be displayed.
7. Chime: The chime can be set to sound every
hour on the hour with a single beep.
8. Il lu mi n a t i n g L i g h t : T h e bu i lt - in el e c t r o-
luminescent (EL) light evenly illuminates t he
display for easy viewing in darkness.
B U T T O N S A N D D I S P L AY S
H O W T O S ET T H E T I M E / CA L EN D A R
H O W T O U S E T H E S T O P WATC H
1 Press But ton C for 2 seconds to change the
display to the TIME/CALENDAR SETTING mode.
(The second digits start flashing.)
2 <Second setting>
Press But ton B in accordance with a t ime
signal. The second digits are reset to“0 0
and start counting immediately.
When the second digits count any number
from 30 to 59 and But ton B is pressed,
one minute is added and the seconds are
immediately reset to 0 0.”
3 Press Button D to confirm the second setting and
move on to the next item.
Selection of the item to be adjusted (flashing)
is made in the following order when Button D is
pressed.
Choice of 12-Hour/24-Hour format
The time display format in either 12-hour indication
or in 24 -ho ur indic ati on ca n be se le c t e d
alternately by pressing Button B. Under the 12-
hour indication format, PM mark appears in
the afternoon, but no AM mark appears in the
morning. Under the 24-hour indication format,
no mark appears on the display.
* Measurement and release of lap t imes can be
repeated when Button C is pressed.
* When Button C is pressed, the display changes to
show the current lap time and total time from START
for 3 seconds, and then it automatically returns to
show the ongoing measurement.
Press But ton D t o go to the STOPWATCH mode.
The STOPWATCH mode indicator appears on the
display.
STOPWATCH OPERATION
Standard Measurement
Lap Time Measurement
B C C B C
Start Lap 1 Reset
Lap 2 Stop
B B C
Start Stop Reset
NREZ013 8-2010
CAL. Z013 (R23 SERIES)
During the measurement, the STOPWATCH signal
keeps flashing.
Press But ton D to return to the TIME/CALENDAR
mode.
4 To set the digits for each item, press Button B to
set the digits. One digit (flashing) is increased
with each pressing of Button B. To move the digits
quickly, keep the Button pressed.
5 After all the adjustments are completed, press
Butt on C to ret ur n to the T IME/CAL ENDAR
mode.
How to stop the alarm while sounding
The alarm sounds for 10 seconds at the designated
time. To stop it manually while sounding, press any
Button.
Note: T he alar m can b e set only in one t i me
zone.
MIN UT E SET T I NG
T I ME Z O N E SE T T IN G
D
C
D
HOU R SE T T I NG
B
B
D
B
AL A RM T I M E S ET TI NG
COM PL ET ED
AL A R M MO DE
C
B
D
T I ME/ CA L EN DA R
M OD E
2 T I ME S
D
D
T IME R
T IME /C AL END AR ST O PWAT CH
AL AR M
SE CON D T IME ZO NE
D
D
D
D
SE C ON D
DAY OF T HE WE EK
12 /24 -H O U R F O R M AT
DAT E
HO UR MI NU T E
D
D
D
D
D
D
DAY OF THE
WEEK SETTING
DATE SETTING
TIME/CALENDAR mode
12/24-HOUR FORMAT
SETTING HOUR SETTING
MINUTE SETTING
SECOND SETTING
C
B
B
B
B
B
B
B
D
D
ST O PWAT CH m od e i nd ic at or
M O N T H
MONTH SETTING
D
D
D
D
D
D
C
D D
D
DD
H O W T O U S E T H E A L A R M
Press But t on D two times to go to the ALARM
mode. The ALARM mode indicator appears on
the display.
1. Press Button C for 2 seconds to change the
display to the ALARM SETTING mode. The hour
digits start flashing.
2. Press Button B to set the hour digits. One digit
(flashing) is increased with each press of Button
B. To move the digits quickly, keep the Button
pressed.
3. Press Button D to confirm the hour setting and
move on to the minute setting. The minute digits
start flashing.
4. Press Button B to set the minute digits. One digit
(flashing) is increased with each press of Button
B. To move the digits quickly, keep the Button
pressed.
5. Press Button D to confirm the minute setting and
move on to the time zone setting.
6. Press Button B to select the time zone.
7. Press Button C to complete the alarm setting.
Press Button D to return to the TIME/CALENDAR
mode.
EN G A G E ME N T / D I S EN G A G E ME N T O F
T H E A L A R M & C H I M E
1. Press Button D two times to go to the ALARM
mode.
2. With each press of Button B, the alarm and chime
can be engaged or disengaged in the following
order. The ALARM singal and/or CHIME signal
appear on the display accordingly.
3. Press Button D to return to the TIME/CALENDAR
mode.
Both alarm and chime
are engaged.
Only chime
is engaged.
Only alarm
is engaged.
Neither alarm nor
chime is engaged.
B
B
B
B
T I ME/ CA L EN DA R
M OD E
ST OP WAT C H M OD E
ST O PWAT CH
s i gna l Bu tt o n B
(S t ar t / St o p)
Bu tt o n C
(L a p/ R e s e t )
AL ARM m od e i nd ic at or
To change the display mode, press Button D. The
display mode changes in the following order.
The miniature battery SEIKO CR2016, Maxell CR2016
or SONY CR2016 which powers your watch should
last approximately 2 years. However, because
it is inserted at the factory, the actual life of the
battery once in your possession may be less than
2 years.
Be sure t o replace the battery to prevent any
possible malfunction as soon as it runs down. To
replace the battery we recommend taking the
watch to a local watch repair shop.
Note: If the alarm is used for more than 20 seconds
a day and/or the illuminating light for more
than 8 seconds a day, the battery life may
be less than the specified period.
BAT T E RY C H A N G E
HO W T O S E T T H E S E C O N D T I ME Z O N E
I L L U M I N AT I N G L I G H T
In any mode press Button A t o illum inat e t he
display for about 4 seconds.
Note:
1. The backlight of the watch employs an electro-
luminescent (EL) light, which tends to lose
illuminating power after very long use.
2. The illuminat ion provided by backlight may
be hard to see whe n viewed unde r dire ct
sunlight.
C A R E O F Y O UR L O R U S W AT C H
This watch contains precise electronic components.
Never attempt to open the case or remove the
back cover.
BATTERY
CAUTION
Do not expose the old battery to re or
recharge it. Keep it at a place beyond
the reach of children. If a child swallows
it, consult a doctor immediately.
WATER RESISTANT
Con d i t i on
of u s e Ac c i d e n t a l
con t a c t
wi t h wa t e r,
su c h a s
sp l a s h e s
a n d ra i n
Sw i m m i n g
a n d t a k i n g
a s h o w e r
Sk i n
d i v i n g
Sc u ba
d i v i n g
Indi cati on
on t he d ial/
case bac k
No
I nd ic a t i on
* If your watch is 200 M/20 BAR, 100 M/10 BAR
or 50 M/5 BAR water resistant, it is so indicated
on the dial/case back.
Do not operate the buttons when the watch is
wet.
If the watch is exposed to salt water, rinse it in
fresh water and then wipe it thoroughly dry.
Should you find any water or condensation
inside the watch, immediately have it checked.
Water can corrode electric part s inside the
case.
NO NO NO
YE S YE S NO NO
YE S YE S NO
NO NO NO
YE S
WAT E R
R E SI S TA N T
WAT E R
R E SI S TA N T
(5 0 M / 5 B A R
)
WAT E R
R E SI S TA N T
10 0M/ 1 0 B AR
or abo ve
(
NO
(
Caution:
Leather st raps are not water re sistant e xcept
so indicate d, ev en if the watch head is water
resistant.
ALLERGIC REACTION
Because the case and band t ouch the skin
directly, it is important to clean them regularly. If
not, shirt sleeves may be stained and those with
delicate skin may develop a rash. Please wear
the watch with some play to avoid any possible
allergic reaction. If you develop a rash on your
wrist, stop wearing and consult a physician.
MAGNETISM
Your watch will be adversely affected by strong
magnetism.Keep it away from close contact with
magnetic objects.
SHOCKS AND VIBRATIONS
Your wat ch may be wor n fo r nor mal sports
activities, but be careful not to drop it or hit it on
hard surfaces.
TEMPERATURE
Your wat ch is pre adjust ed so that co nstant
accuracy may be insured at normal tempera-
ture.
CLEANING
Use only a soft cloth and clean water for cleaning
your wa tch . Ne v er use che mic als, as t he
waterproof gasket will corrode.
SE R V I C E
Whe n your LORU S wat ch requires re pair or
servicing, please see the enclosed WARRANTY/
GUARANTEE. Pr i n t ed in C hi n a
SE CO ND T IM E ZO N E
i nd i c at o r
TIMER OPERATION
1. Press Button B in the TIMER mode to start the
timer.
2. Press Button B to stop the timer.
3. To reset the timer, press Button C.
Press Button D to re turn t o t he T IME/CALENDA R
mode.
B B C
Start Stop Reset
D
B
B
C
D
C
HOU R SET T ING
MINU T E S ET T I NG
SECO ND S ET T I N G
T I M E R SE T T IN G
CO M P L ET E D
YE S
T IME R mo de i nd i cat or
Press Button D four times to go to the SECOND TIME
ZONE mode. The SECOND TIME ZONE mode indicator
appears on the display.
1. Press B utton C for 2 seconds to change t he
display to the TIME ZONE SETTING mode. The hour
digits start flashing.
2. Press Button B to set the hour digits. One digit
(flashing) is increased with each press of Button
B. To move the digits quickly, keep the Button
pressed.
3. Press Button D to confirm the hour setting and
move on to the minute setting. The minute digits
start flashing.
4. Press Button B to set the minute digits. The minute
digits are increased in 30-minute increments.
5. Press Button C to complete the second time zone
setting.
Press Button D to return t o the TIME/CALENDAR
mode.
D
HOU R SET T ING
(+ 1 HOU R )
MINU T E S ET T I NG
(+30 MI NU T ES)
C
SECO ND T I M E Z ONE
SET T I NG C O M PL ET ED
HO W T O U S E T HE T I M E R
Press Button D three times to go to the TIMER mode.
The TIMER mode indicator appears on the display.
1. Press Butt on C f or 2 seconds to change the
display to the TIMER SETTING mode. The hour
digits start flashing.
2. Press Button B to set the hour digits. One digit
(flashing) is increased with each pressing of
Button B. To move the digits quickly, keep the
Button pressed.
3. Press Button D to confirm the hour setting and
move on to the minute setting. The minute digits
start flashing.
4. Press Button B to set the minute digits. One digit
(flashing) is increased with each pressing of
Button B. To move the digits quickly, keep the
Button pressed.
5. Press Button D to confirm the minute setting and
move on to the second setting. The second digits
start flashing.
6. Press Button B to set the second digits. One digit
(flashing) is increased with each pressing of
Button B. To move the digits quickly, keep the
Button pressed.
7. Press Button C to complete the timer setting.
ALA R M M OD E
T IM E/ CA LEND AR
MODE
3 T IME S
B
D
B
B
D
C
(R ES E T )
(S TAR T )
(S T O P)
D
4 T IME S
C
SEC OND T I ME ZO NE
MODE
T IM E/ CA LEND AR
MODE
D
B
B


Produktspezifikationen

Marke: Lorus
Kategorie: betrachten
Modell: R2383HX9

Brauchst du Hilfe?

Wenn Sie Hilfe mit Lorus R2383HX9 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung betrachten Lorus

Bedienungsanleitung betrachten

Neueste Bedienungsanleitung für -Kategorien-