Lorus NX02 Bedienungsanleitung

Lorus betrachten NX02

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Lorus NX02 (4 Seiten) in der Kategorie betrachten. Dieser Bedienungsanleitung war für 6 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF
Seite 1/4
I MNSTRUCTION ANUAL
CAL. NX02 (RZ1 SERIES)
CAL. NX03 (RB5 SERIES)
NRENX03C 05-00
■
HOW TO SET THE TIME/CALENDAR
[Digital Time/Calendar Setting]
• Before setting the analogue time, be sure
to set the dig ital tim e.
Day
B C
Date
D
Seconds
Minu te s
Hour
A
PM mark
1. Press button “A” to show the TIME/CALENDAR
mode.
2 . Pr e s s b u t to n “ A ” f o r 2 to 3 se c o n d s t o
sho w the time / c a l endar sett i n g di s p lay.
A beep sounds for 1 second, and the second
digits start flashing.
3. Selection of the digits to be adjusted (flashing)
is made in the following order by pressing
button “C”.
Date M on th
Year
Hour
Minutes
Seconds
12-/24-hour
indication
→ → →
→→→
4. Press button “D” to set the flashing digits.
One digit i s adv an ce d wit h each press o f
button “D”. Digits except seconds and 12-
/24-hour indication move quickly by keeping
button “D” pressed.
5. Aft e r al l th e adj ust ment s ar e com ple ted ,
press button “A” to return to the TIME/
CALENDAR mode. A beep sounds for 1
second.
→
Seconds setting
When the seconds digits are flashing, press
button “D” in accordance with a time si gnal.
The seconds are reset to “00” and start immediately.
When the s e conds c o u n t a n y n u m b e r f r o m
“30” to “59” and button “D” is pressed, one
minute is added and the seconds are immediately
reset to “00” .
12- / 2 4-ho u r i n dica t i on sett i n g
Changeover between 12- and 24-hour indications
is made alternately with each press of button
“D”.
Notes:
1. W h en s e t ting t h e h o u r di g i t s i n th e 1 2-
hour indication, check that AM/PM is properly
s e t . O n l y m a r k i s d i s p l a y e d a n d“P M ”
there i s no indicati on for the AM s etting.
In the 24-hour indication, is displayed.“24H”
2. Once the year, month and date have been
set, the day of the week is set automatically.
A
A
A
S T O P W A T C H
mode
TIME/CALENDAR
mode
T I M E R
mode
REGULAR ALARM
mode
A
By pressing button in the TIME/CALEN-“ ”C
DAR mode, the SINGLE-TIME ALARM mode is
shown.
TIME/CALENDAR
mode
SINGLE-TIME
A L A R M m o d e
C
With each press of button in the TIME/“ ”D
CALENDAR mode, the display changes over in
the following order.
D
T i m e / c a l e n d a r
display
Calendar
display
Blank display
DD
■ CHARACTERISTICS
1. Time/c ale nda r display:
•Analogue display: Hour, minutes and seconds.
•Digital display : Hour, minutes, seconds,
date and day of the week.
•Fully automatic calendar: Calendar adjusts
automatically for odd and even months including
February of leap years from the year 1998 to
the end of 2048.
•Time i n d i c a t i o n : Changeover between
12- and 24-hour indications is possible.
2 . S t o p w a t c h : Measures up to 23 hours, 59
minutes and 59 seconds in 1/100 second increments
for the first hour and in 1-second increments
thereafter.
3. C ou ntd ow n time r: Up to 9 hours and 59
minutes can be set in minute increments.
4. Sin gl e- time a la rm: The single-time alarm
can be set to ring only once at the designated
time. As it rings, it is automatically disengaged.
5. R e gul ar a lar m : The regular alarm can be
set to ring on a 24-hour basis.
•Hou r l y t i m e s i g n a l : Can be set to ring
every hour on the hour.
6. Demo n s t r a tion fu n c t i o n: Each mode is
displayed for 2 seconds in order.
7. Illuminating light: The light evenly illuminates
the display for easy viewing in the dark.
Hour hand Minute hand
Date
C
Day
B
PM
mark
A
Crow n
Second
hand
Minu te s
Hourly time
signal mark
Alarm
mark
Hour S ec on ds
D
* The design of the liquid crystal panel differs
depending on the model, though the functions
and method of opera tion are the sam e.
1-AL
P M
24
BC
DA
PM
mark Crow n
Hour
hand
Day Date
Hourly time
signal mark
Minute
hand
Second
hand
Minu te s
Hour S ec on ds
Alarm mark
The selection of the mode can be made in the
following order with each press of button “ ”A .
■ CROWN/BUTTONS AND DISPLAYS
Second hand
[Analogue Time Setting]
Hour hand Minute hand
Crow n
a b
a: Normal position
b: Extended position
1. Pull out the crown when the second hand
is at the 12 o clock position.’
2. Turn the crown to set the hour and minute
hands.
3. Push the crown back in to the normal position
when t he second digits count i n the“00”
digital display.
S t a r t S t o p
R e s t a r t
Stop
Accumulated elapsed time measurement
C C CC D
Reset
Accumulate repeatedly by
pressing button “ ”C .
Stopwatch Operation
■ HOW TO USE THE COUNTDOWN TIMER
• The timer can be set up to 9 hours and 59
minutes in minute increments.
• The remaining time is displayed in seconds.
* If the time set previously remains displayed,
press button to reset the digits to “ ”D“0:00'oo”
before setting the desired time.
* Even if the TIMER mode is changed to another
while the measurement is in progress, it
continues counting properly. After the timer
is used, however, be sure to reset it as the
battery energy is consumed enormously to
shorten the battery life.
Pr ess b utto n to show t h e STO PWA TCH“ ”A
mode.
Seconds
Tim e r s e ttin g
STOPWATCH
mode mark
C
D
B
A
Minu te s Seco nd s 1/100 seconds
C
D
B
A
Hour
Minutes
Time-up
Stop
R e s t a r t
Warning
soun d
beeps.
S t a r t
Res tart and stop of the
tim er can be repeated by
pressing button “ ”C .
CC C
Press th e button in the following order.
Timer operation
4. Press but t on t o se t the dig i ts. On e“ ”D
digit is advanced with each press of the
button. The digits move quickly by keeping
the button pressed.
5. After all the adjustments are completed, press
button “ ”A to return to the TIMER mode. A
beep sounds for 1 second.
Hour Minu te s
→
→
1. Press button to show the TIMER mode.“ ”A
2 . P r e s s b u t t o n f o r 2 t o 3 s e c o n d s t o“ ”A
show the timer setting display. A beep
sounds for 1 second, and the hour digit
starts flashing.
3. Selection of the digits to be adjusted (flashing)
is made in the following order by pressing
button “ ”C .
* Whe n the set t ime i s up, a war nin g sou nd
beeps for 10 seconds. To stop it manually,
press any of the buttons.
■ HOW TO SET THE SINGLE-TIME ALARM
C
D
B
A
Hour Minu te s
Current timePM mark
Sing le -t ime
alarm mark
1. Press button in the TIME/CALENDAR“ ”C
mode to show the SINGLE-TIME ALARM
mode.
2. Press button or to set the desired“ ”C“ ”D
alarm time.
The single-time alarm mark is displayed“1-AL”
and the alarm is automa tically engage d.
* One minute is advanced or moved back
with each press o f b u t t o n o r “ ”C“ ”D ,
re s pec t ive ly. Th e d igi t s mov e quic kly
by keeping the respective buttons pressed.
3. To return to the TIME/CALENDAR mode,
press button “ ”A .
• To cancel the alarm time you have set,
press buttons and at the same time,“ ”C“ ”D
or press button or to set the alarm“ ”C“ ”D
time to the current time.
• The alarm rings at the designated time for
20 seconds. To stop it manually, press any
of the buttons.
■ HOW TO SET THE REGULAR ALARM
REGULAR ALARM
mode mark
B
A
C
D
PM
mark
Hour Minu te s
Alarm mark
Hourly time
signal mark
■HOW TO USE THE STOPWATCH
• The stopwatch can measure up to 23 hours,
59 minutes and 59 seconds in 1/100 second
increments for the first hour and in second
increm en ts th er ea fter.
* Even if the STOPWATCH mode is changed
to another while the measurement is in progress,
it continues counting properly. After the
stopwatch is used, however, be sure to reset
it as the battery energy is consumed enormously
to shorten the battery life.
TI ME R
mode mark
• The single-time alarm can be set to ring
onl y o n c e a t th e d e s i g n a t e d t i m e . A s it
rings, it is automatically disengaged.
• The alarm time can be set in minute increments
starting from the current time.
→
→
Minu te sHour
4. Pre s s bu t ton t o s e t th e di g its . O n e“ ”D
di g it is a dva n ced wi th e ach pr ess of th e
button. The digits move quickly by keeping
the button pressed.
5. Afte r al l the adj u stm ent s ar e com ple ted,
press button to return to the REGULAR“ ”A
ALARM mode. A beep sounds for 1 second.
1. Press button to show the REGULAR“ ”A
ALARM mode.
2 . P r e s s b u t t o n f o r 2 t o 3 s e co n d s t o“ ”A
show the regular alarm setting display. A
beep sounds for 1 second, and the hour
digits start flashing.
3. Press button to select the digits to be“ ”C
adjusted (flashing).
Eng a g emen t / dise n g agem e n t o f t h e
re g ula r al arm and hou rly tim e si gnal
■ DEMONSTRATION FUNCTION
1. Press button for 2 to 3 seconds in the“ ”D
TIME/CALENDAR mode to activate the
demons tr at io n f un ction.
2. T he mode s an d di spl ays are sho wn f or 2
seconds automatically in the following order.
→→
Calendar
display
Time/calendar
display Stopwatch
mode
Blan k
display
→
Regular
alarm mode
→
→
→
Timer
mode
3. To deactivate the demonstration function,
press any of the buttons. The watch returns
to the TIME/CALEN DA R mod e.
■LUMIBRITE WATCH
(dial, hands, buttons, case, bezel,
strap, etc.)
✩If your watch is a LORUS LUMIBRITE watch,
it h as f oll owi ng f eat ure s.
LO R US L U MIB R IT E w at c he s a bs o rb an d st o re
light energy from natural and artificial light sources
an d em i t l i g ht i n t h e d ark . T h e y a re m ad e of
environmentally friendly material, and therefore,
are harmless to human beings and the environment.
•With a full charge, LORUS LUMIBRITE watches
glow in the dark hours longer than conven-
tional luminous watches of this type. If ex-
posed to a light of more than 500 lux (i.e., the
brightness of a typical office) for approximately
10 minu te s, or d ir ec t sun li gh t for 2 m in utes,
they wil l gl ow for ho urs.
•Since LORUS LUMIBRITE watches emit the
light th ey st ore, the b rig htness will d ecre ase
gradually over time. The length of time they
will glow may also differ slightly depending
on such factors as the brightness of and distance
from the light source used to charge the watch.
• “ ”With each press of button C in the REGULAR
ALARM mode, the engagement and disengagement
of the regular alarm and hourly time signal
are made as follows.
1
2
Hourly time
signal mark
Neither engaged
Both engaged
Hourly time signal engag ed
Alarm engag ed
Alarm mark
3
4
• At the designated time, the alarm rings for
20 seconds and stops. To stop it manually,
press any of the buttons.
• The alarm can be tested by keeping button
“ ”C pressed in the REGULAR ALARM mode.
Notes:
1. When the time function is displayed in the
24-hour indication, the alarm is also displayed
in the 24-hour indication.
2. When setting t h e h o u r d i g i t s i n t h e 12 -
hour indication, check that AM/PM is properly
s e t . On l y m a r k is d i sp l a ye d a n d“P M ”
there is no indication for the AM setting.
In the 24-hour indication, is displayed.“24H”
■ILLUM I NATIN G L I GHT
• “ ”Wh en b utt on B is pre sse d an d re lea sed
in any of the modes and displays, the light
ill u m inate s the disp l a y fo r 3 seco n d s fo r
easy viewing in the dark. The display remains
illum inated if butto n is kept press ed.“ ”B
• “ ”When button B is pressed in the calendar
or bla nk display of the TIME /CALENDAR
mode, th e t i m e / c a l e n d a r is show n w h i l e
the display is illuminated .
■ ViViDiGi
Note: If the alarm is used for more than 10
seconds a day and/or the illuminating
light for mor e than once (fo r 3 seconds)
a d ay , t he bat te ry li fe ma y b e les s tha n
the spe cif ied per iod.
■ BATTER Y C HANGE
The miniature lithium batteries SONY SR626SW
for analogue display and SONY SR41W for
digital display,which power your watch should
last approximately 2 years. However, because
the y are i n sert e d at t h e fa c t ory, t he ac t u al
life of the batteries once in your possession
may be less than the specified period. Be
sure to replace the batteries to prevent any
possible malfunction as soon as they run down.
To replace the batteries, we recommend taking
the wa tch to a local wa tch repair shop.
■ CARE OF YOUR LORUS WATCH
• BATTERY
• WATER RESISTANT
B
N o
i n d i c a t i o n
W A T E R
R E S I S T A N T
W A T E R
R E S I S T A N T
(50 M/5 BAR)*
W A T E R
RESISTANT
100 M/
10 BAR or
above
Condition
of use
Accidental
contact with
water, such
as splashes
and rain
Swimm-
in g an d
taking a
sho wer
Ski n
div ing
Scuba
div ing
Ind ica -
tion o n
the d i al/
case back
NO N O N O NO
YES YES NO NO
YES NO NO NO
YES YES YES NO
( )
*
CAUTION
D o n o t e x p os e t h e o l d b a t t er y t o
f i r e o r rec h a rg e i t . Ke e p i t a t a
p l a c e b e y o n d t h e r e a c h o f c h i l -
dren. If a child swallows it, consult
a d o c t o r i m m e d i a t e l y .
ViViDiGi is a new type of liquid crystal panel that
makes possible various colors and high contrast.
•Excellent light reflection and transmission make
the display bright and clear.
•Various color options are available.
•Either the whole panel or the displayed data
onl y ca n be illuminate d.
* Fe atures vary in d iff erent model s.

Produktspezifikationen

Marke: Lorus
Kategorie: betrachten
Modell: NX02

Brauchst du Hilfe?

Wenn Sie Hilfe mit Lorus NX02 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten


Bedienungsanleitung betrachten Lorus

Lorus

Lorus R23 SERIES - CAL Z013 Bedienungsanleitung

24 August 2024
Lorus

Lorus VX7P Bedienungsanleitung

22 August 2024
Lorus

Lorus Dress RM313GX9 Bedienungsanleitung

21 August 2024
Lorus

Lorus VX9P Bedienungsanleitung

21 August 2024
Lorus

Lorus Classic RS952CX9 Bedienungsanleitung

21 August 2024
Lorus

Lorus Z021 Bedienungsanleitung

20 August 2024
Lorus

Lorus Z004 Bedienungsanleitung

19 August 2024
Lorus

Lorus Women RG208RX9 Bedienungsanleitung

19 August 2024
Lorus

Lorus Dress RT333GX9 Bedienungsanleitung

19 August 2024
Lorus

Lorus Kids R2345MX9 Bedienungsanleitung

19 August 2024

Bedienungsanleitung betrachten

Neueste Bedienungsanleitung für -Kategorien-

Casio

Casio GW-3000BD-1AER Bedienungsanleitung

9 Oktober 2024
Citizen

Citizen Cal 411X Bedienungsanleitung

7 Oktober 2024
Casio

Casio Edifice EFA-112D-1AVEF Bedienungsanleitung

7 Oktober 2024
Casio

Casio Baby-G BGA-200-1E2ER Bedienungsanleitung

6 Oktober 2024
Jaguar

Jaguar J627 Bedienungsanleitung

6 Oktober 2024
Citizen

Citizen CAL 4633 Bedienungsanleitung

5 Oktober 2024
Auriol

Auriol IAN 277495 Bedienungsanleitung

4 Oktober 2024
La Crosse Technology

La Crosse Technology WT-941 Bedienungsanleitung

4 Oktober 2024
Spin Master

Spin Master Dumas SP-5081-11 Bedienungsanleitung

4 Oktober 2024
Michael Kors

Michael Kors Kors Access Scout Hutton MKT4024 Bedienungsanleitung

3 Oktober 2024