Lorus 7N42 Bedienungsanleitung


Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Lorus 7N42 (2 Seiten) in der Kategorie betrachten. Dieser Bedienungsanleitung war für 11 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/2
NREAQ 7-2010
HOW TO USE NON-CALENDAR MODEL
Pull the crown OUT to the FIRST click and set the
time. Then push the crown IN.
Note: When you set the time, first set the minute
hand to a properly advanced time, then
return the minute hand to the correct time
by turning it COUNTERCLOCKWISE.
Time setting for Cal. V516
Turn the hands counterclockwise to advance
them 4 to 5 minutes ahead of the desired time.
Then turn them clockwise to set them to the
exact time.
HOW TO USE DAY/DATE MODEL
The day of the week can be displayed
bilingually (English/another language) and you
can select either.
1. How to set the day and date
Pull out the
crown to the first
click position.
(The crown of
this watch can
be pulled out to
the second click
position.)
Turn the crown
and set the
previous day
and date. (The
day and date
can be selected
alternatively
and displayed in
English or the
other
language.)
Pull out the
crown to the
second click
position and
set the present
day and date
by turning the
minute hand.
Day setting for Cal. V828 (Ladies’ Day/Date)
Turn the hands clockwise and counterclockwise
repeatedly between 11:15 pm and 3:45 am to
select the desired day and language.
Note: Do not attempt to set the day and date
between the times of
9:00 pm and 4:00 am
as this may cause the day and date
displays to change out of sequence.
2. How to set the time
LUMIBRITE WATCH
If your watch is a LORUS LUMIBRITE watch, it
has following features.
LORUS LUMIBRITE watches absorb and store light
energy from natural and artificial light sources
and emit light in the dark. They are made of
environmentally friendly material, and therefore,
are harmless to human beings and the
environment.
With a full charge, LORUS LUMIBRITE watches
glow in the dark hours longer than conven-
tional luminous watches of this type. If ex-
posed to a light of more than 500 lux (i.e.,
the brightness of a typical office) for approxi-
mately 10 minutes, or direct sunlight for 2
minutes, they will glow for hours.
Since LORUS LUMIBRITE watches emit the light
they store, the brightness will decrease
gradually over time. The length of time they
will glow may also differ slightly depending
on such factors as the brightness of and
distance from the light source used to charge
the watch.
Pull out the
crown to the
second click
position and the
second hand
stops. The
second hand
should be
stopped on 12
o’clock position.
Turn the crown
and set the
desired time.
Push the crown
in to the normal
position in
accordance
with a time
signal.
Be sure to check that the AM/PM is correctly
set. (The day and date are designed to
change once every 24 hours.)
To adjust the correct time for a quartz watch,
it is necessary to advance the minute hand
4 or 5 minutes ahead of the correct time and
then turn it counterclockwise to set the
designated time.
Normal position
First click
NAEAQ 10.6.17, 4:34 PMPage 1 Adobe
HOW TO ADJUST BAND LENGTH
Sliding clasp band
1. Pry up the adjusting flap with a small
screwdriver or something with a sharpened
tip.
2. Slide the clasp to adjust it to a desired size.
3. The grooves on the Back side of the bracelet
should fit into the convex portion on the
clasp, then, close the adjust flap.
Wrong method
If you do this way, the adjusting flap may be
destroyed.
WATER RESISTANT
* If your watch is 200 M/20 BAR, 100 M/10 BAR
or 50 M/5 BAR water resistant, it is so
indicated on the dial/case back.
Do not press the buttons or turn the crown
when the watch is wet.
If the watch is exposed to salt water, rinse it
in fresh water and then wipe it thoroughly
dry.
NO NO NO
YES
YES
YES NO NO
YES YES NO
Condition
of use
Accidental
contact
with water,
such as
splashes
and rain
Swimming
and taking
a shower
Skin
diving
Scuba
diving
Indication
on the dial/
case back
No
Indication
NO NO NO
YES
WATER
RESISTANT
WATER
RESISTANT*
(50M/5 BAR
)
WATER
RESISTANT*
100M/10 BAR
or above
(
NO
(
Caution:
Leather straps are not water resistant except so
indicated, even if the watch head is water
resistant.
ALLERGIC REACTION
Because the case and band touch the skin
directly, it is important to clean them regularly.
If not, shirt sleeves may be stained and those
with delicate skin may develop a rash. Please
wear the watch with some play to avoid any
possible allergic reaction. If you develop a rash
on your wrist, stop wearing and consult a
physician.
• MAGNETISM
Your watch will be adversely affected by strong
magnetism. Keep it away from close contact
with magnetic objects.
SHOCKS AND VIBRATIONS
Your watch may be worn for normal sports
activities, but be careful not to drop it or hit it
on hard surfaces.
• TEMPERATURE
Your watch is preadjusted so that constant
accuracy may be insured at normal
temperature.
SERVICE
When your LORUS watch requires repair or
sevicing, please see the enclosed WARRANTY/
GUARANTEE.
CAUTION
Do not expose the old battery to fire
or recharge it. Keep it at a place
beyond the reach of children. If a
child swallows it, consult a doctor
immediately.
Printed in China
CARE OF YOUR LORUS WATCH
• BATTERY
BATTERY CHANGE
As the battery is inserted at the factory to check
the function and performance of the watch, its
actual life once in your possession may be less
than the specified period.
Be sure to replace the battery to prevent any
possible malfunction as soon as it runs down. To
replace the battery, we recommend taking the
watch to a local watch retailer.
NAEAQ 10.6.17, 4:34 PMPage 2 Adobe


Produktspezifikationen

Marke: Lorus
Kategorie: betrachten
Modell: 7N42

Brauchst du Hilfe?

Wenn Sie Hilfe mit Lorus 7N42 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung betrachten Lorus

Bedienungsanleitung betrachten

Neueste Bedienungsanleitung für -Kategorien-