Lorex LDC6081 Bedienungsanleitung

Lorex Sicherheitskamera LDC6081

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Lorex LDC6081 (2 Seiten) in der Kategorie Sicherheitskamera. Dieser Bedienungsanleitung war für 13 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/2

Contents

• Weatherproof IR dome camera

• Mounting screws x 4

• 60ft. BNC / power extension cable

• BNC female / RCA male adapter

• Power adapter

Features

• Advanced Sony Super HAD™ II image sensor

• Video image processor produces sharp and clear video at

600 TV lines of resolution

• 4–9mm manual zoom lens for flexible viewing angle

(39–93º diagonal)

• ClearNight imaging technology ensures clear night vision and

improves recording efficiency up to 30%

• Night vision up to 75ft. (23m) away in total darkness*

• Split glass design minimizes IR reflection

• IP66 rated aluminum housing for indoor / outdoor

installations**

Disclaimers:

* Infrared illumination range under ideal conditions. Actual range and clarity may vary depending on

scene / object reflection and camera application.

** Not intended for submersion in water. Installation in a sheltered location recommended.

Warning/Caution

• Read this guide carefully and keep it for future reference

• Follow all instructions for safe use of the product

• Use the camera within given temperature, humidity and voltage

levels noted in Camera Specifications

• Do not disassemble the camera

• Do not point the camera directly towards the sun or a source of

intense light

• Use only the supplied regulated power supply. Use of a non-

regulated, non-conforming power supply can damage this

product and voids the warranty

• The supplied extension cable is rated for surface mounting only

• Cables for in-wall / floor-to-floor installations are sold

separately

Installation Tips

• Point the camera where there is the least amount of obstructions

(i.e. tree branches)

• Install the camera in a location that is difficult for vandals to

reach

• Secure cabling so that it is not exposed or easily cut

• Camera rated for outdoor use. Installation in a sheltered

location recommended

WARNING - A REGULATED UL / CSA APPROVED power supply is

REQUIRED for use with this camera. Use of a non-regulated, non-

conforming power supply can damage this product and voids the

warranty.

Camera Specifications

* IR Illumination Range under ideal conditions. Objects at or beyond this range may be partially or

completely obscured, depending on the camera application.

** Not intended for submersion in water. Installation in a sheltered location recommended.

Dimensions

As our products are subject to continuous improvement, Lorex reserves the right to modify product design,

specifications and prices, without notice and without incurring any obligation. E&OE

Image Sensor 1/3” Sony Super HAD™ II

Video Format NTSC

Effective Pixels H: 768 V: 494

Resolution 600 TV Lines

Scan System 2:1 Interlace

Sync System Internal

S / N Ratio 50dB (AGC Off)

Iris AES

AES Shutter Speed 1/60 ~ 1/100,000 sec.

Min. Illumination 0.2 Lux without IR LED

0 Lux with IR LED

Video Output Composite 1.0Vpp @ 75ohm

Lens / Lens Type 4–9mm F1.4 / Varifocal

FOV (Diagonal) 39–93°

Termination BNC Type

IR LED Qty. / Type 28 pieces / 850nm

Night Vision Range* 75ft / 23m

Power Requirement 12V DC ±10%

Power Consumption Max. 400mA (w / IR)

Operating Temp. Range 14° ~ 122°F / –10° ~ 50°C

Operating Humidity Range < 90% RH

Environmental Rating** IP66

Weight (including stand) 1.6lbs. / 0.7kg

120mm / 4.8"

102mm / 4.1”

Product Information

User Manuals

Quick Start Guides

Specification Sheets

Software Upgrades

Firmware Upgrades

LDC6081

SUPER RESOLUTION WEATHERPROOF

VARIFOCAL NIGHT VISION DOME CAMERA

FOR SUPPORT AND INFORMATION,

VISIT WWW.LOREXTECHNOLOGY.COM

QUICK START GUIDE

English Version 1.0

Installing The Camera

Before installing the camera:

• Decide whether to run the cables

through the wall / ceiling

(drilling required), or along the

wall / ceiling.

• If you run the cables along the

wall / ceiling, you must run the

cable through the cable notch on

the base. This will keep the

camera base flush to the wall /

ceiling when mounted.

To install the camera:

1. Rotate the camera base counterclockwise to separate

it from the ball camera and dome cover.

2. Feed the BNC / power cable through the camera base.

If you are running the cables against a wall or ceiling,

make sure to pass the cable through the cable notch as

shown above.

3. Connect the video and power cable as shown in the

next section ‘Connecting The Camera‘.

4. Mount the camera base to the wall or ceiling using the

included screws.

5. Position the dome cover over the camera and screw it

clockwise halfway onto the camera base.

6. Move the ball camera to the desired position. While

holding the ball camera firmly in place, screw the dome

cover the rest of the way to secure it to the camera base.

Holding the camera prevents it from moving while

installing the dome cover.

ATTENTION - Test all connections and ensure the camera is working

correctly prior to permanent installation by temporarily connecting the

camera(s) and cable(s) to the viewing / recording solution.

Cable notch

Connecting The Camera

Lens Adjustment

Use a flathead screwdriver to adjust the Focus and Zoom control

screws on the camera if necessary.

Note: Have a second person verify the camera image when you

adjust the focus and zoom.

BNC to RCA Adapter

Setup Diagram

Connect the BNC and power

connectors to the camera.

Connect the BNC connector to

the video input of the monitor /

DVR, and connect the included

power connector to a power

adapter. See Setup Diagram

below for details.

Male power

BNC

To Camera: To Monitor / DVR:

Female power

Zoom

Focus

DVR / CCTV MONITOR

Video IN

TV / VCR

Video IN

BNC to RCA Adapter

Attach the included BNC to RCA adapter to connect the

extension cable to RCA inputs (i.e. for a TV connection).

Cable Extension Options

Extend the cable run for your camera up to 300ft. or more

depending on the cable type used. See table below:

Notes:

1. For optimal performance, consider using option 2 or 3. It is best

to use the same cable type for the entire distance.

2. Cable run recommendation based on typical camera power

consumption (up to 500mA). For specialty cameras with higher

current consumption, maximum cable run may be reduced.

Consider providing power to the camera at the camera side,

rather then at the end of the extension cable.

3. Indicators that your cable run may be too long:

• Video is permanently black & white (even during day time)

• Video is distorted

Troubleshooting

Option Cable Type Max Cable

Run Distance

Max. # of

Extensions

1 Regular BNC (supplied with

camera)

180ft. / 55m 3

2 'RG59' or 'Coax' or ' Coaxial'

BNC (sold separately) 300ft. / 92m 5

3 Lorex Universal Cable

(sold separately) 300ft. / 92m 3

Problem Solution

No Picture / Signal • Ensure your TV is on the correct input channel.

Common terms of an input channel: INPUT, AV

CHANNEL, LINE1, LINE2, AUX.

• If your camera is connected to a VCR / DVR,

ensure it is properly connected to your TV /

Monitor.

• Ensure connections are properly connected.

• Ensure the camera power supply is plugged in.

Picture is too bright • Ensure your camera isn’t pointed directly at a

source of light (e.g sun or spot light).

• Slide the sunshade (bullet cameras only)

forward to block excess light.

• Move your camera to a different location.

Picture is too dark • If using during the day, the camera may not be

getting enough light. Slide the sunshade (bullet

cameras only) backwards to let in more light.

• Check the brightness and contrast settings of

the device your camera connects to (TV /

Monitor / DVR).

Night vision is not

working • The night vision activates when light levels

drop. The area may have too much light.

Picture is not clear • Check the camera lens for dirt, dust, and

spiderwebs. Clean the lens with a soft, clean

cloth.

• Make sure that the cable run is within the

limitations specified in the section ' Cable

Extension Options'.

Bright spot in video

when viewing camera

at night

• Night vision reflects when pointing a camera to

a window. Move the camera to a different

location.

BNC connection does

not connect to my TV

• Use a BNC to RCA adapter at the end of the

extension cable.

Camera Base

Produktspezifikationen

Marke:	Lorex
Kategorie:	Sicherheitskamera
Modell:	LDC6081
WLAN:	Nein
Mitgelieferte Kabel:	BNC
Produktfarbe:	Black, White
Internationale Schutzart (IP-Code):	IP66
Übertragungstechnik:	Kabelgebunden
Befestigungstyp:	Zimmerdecke
Betriebstemperatur:	-10 - 50 °C
Relative Luftfeuchtigkeit in Betrieb:	0 - 90 %
Verpackungsbreite:	216 mm
Verpackungstiefe:	172 mm
Verpackungshöhe:	140.5 mm
Paketgewicht:	1400 g
Power over Ethernet (PoE):	Nein
Energieverbrauch:	400 mA
Analoges Signalformatsystem:	NTSC
Schnittstelle:	BNC
Fokuseinstellung:	1.4
Größe des Bildsensors:	1/3 "
Blickwinkel (FOV):	93 °
Formfaktor:	Dome
Integrierter Kartenleser:	Nein
Maximale Auflösung:	- Pixel
Brennweitenbereich:	4 - 9 mm
Mindestbeleuchtung:	0 Lux
Eingebaute HDD:	Nein
Nachtsichtdistanz:	23 m
LED Typ:	IR
Sensor-Typ:	CCD
Optischer Zoom:	- x
Nachtsicht:	Ja
Kamera Verschlusszeit:	1/60 - 1/100000 s
Infrarot-Wellenlänge:	850 nm
Anzahl der Beleuchtungs-LEDs:	28
Composite Video-Ausgang:	1
Anzahl der TV-Linien:	600
Ethernet/LAN:	Nein
Unterstützte Positionierung:	Innen & Außen