Lexon Orbe LH88 Bedienungsanleitung

Lexon Radio Orbe LH88

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Lexon Orbe LH88 (5 Seiten) in der Kategorie Radio. Dieser Bedienungsanleitung war für 5 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/5
Design by Nelson Fossey
ORBE
LH88
1
2
3
5
6
4
7
4
Operation mode
In use
Charging
Fully charged
Light indicator status
Light indicator remains OFF
Red light indicator remains solid
Red light indicator turns OFF
IN THE BOX
1x 1x 1x ORBE lamp Charging cable User manual
The light source of Orbe is an integrated LED module. The lamp is protected against
water splashing or sprayed water from any angle (IPX4 rating). The lamp is equipped
with a USB-C connector. The supplied charging cable allows you to connect your lamp to
any any USB-C power adapter (not supplied). A fully charged lamp stays on for
approximately 48 hours (at 75% brightness).
PRODUCT OVERVIEW
1. Lamp head
2. Lamp body
3. Cord
4. Magnetic surface
5. Push button
6. LED indicator (battery & charging status)
7. Type-C charging port
CHARGING INSTRUCTIONS
1. Plug the provided charging cable into the charging port of Orbe.
2. Plug the other USB-C end of the cable into any USB-C power adapter.
It will take approximately 5 hours to fully charge the lamp.
LED information
OPERATING INSTRUCTIONS
• Press the push button once to turn ON the light.
• ON, When turned slowly press the push button to toggle from one light color to
another. There are 9 colors options.
• To adjust press and hold the push button until you have reached the brightness,
desired intensity.
• To turn OFF the light, wait three seconds after the last press then press again.
Note: If you want to set Orbe in cool white and warm white light mode only, press three
times quickly.
To return to full set lighting mode, repeat the procedure.
MAINTENANCE
• Clean carefully with soft cloth.
• Do not use any cleaning materials that contain chemicals.
SAFETY PRECAUTIONS
• Place the lamp on a dry, horizontal surface.
tsniaga ti tcetorP .retpada eht tuohtiw esu roodtuo dna roodni rof dednetni si ebrO •
water and store inside after use.
• Do not pull the cord that connects the lamp head to the lamp body.
• Charge the device only with the supplied charging cable and a power adapter
(not
supplied).
dna snoitaluger yrtnuoc elbacilppa htiw tnailpmoc si taht retpada na htiw egrahc ylnO •
international and regional safety standards.
• Other adapters may not meet applicable safety standards and charging with such
adapters could pose a risk of death or injury.
esuac nac ,tneserp si erutsiom nehw gnigrahc ro ,sregrahc ro selbac degamad gnisU •
fire, electric shock, injury, or damage to the case or other property.
ruoy esu ot dednemmocer si tI .saera dloc ro toh yrev ni ecived ruoy erots ton oD •
device at room temperatures.
elbac deilppus eht ro ecived eht elbmessasid ro ,riaper ,ecivres ot tpmetta ton oD •
yourself.
PRODUCT SPECIFICATIONS
Material: ABS
Weight: 535g / 1.18 lbs
Dimensions: Lamp head: Ø10 x 9,5 cm / Ø3.94 x 3.74"
Lamp body: Ø8,5 x 13,7 cm / Ø3,35 x 5,39"
Cord: 24 cm / 9.45"
Max. lumen output: 100 lm
LED lifetime: 30000h
Color temperature: 3000-7000K
Water resistance: IPX4 (Protected against splashing or sprayed water from any angle)
Input port: DC 5V
Battery type: Li-ion 4000 mAh
Battery voltage: 3.7V
Normal usage time: Up to 48h
Charging system: USB Type-C
Charging time (USB Type-C): 5 hours
Operating temperature: 0°C - 45°C
Warranty: 1 year international


Produktspezifikationen

Marke: Lexon
Kategorie: Radio
Modell: Orbe LH88

Brauchst du Hilfe?

Wenn Sie Hilfe mit Lexon Orbe LH88 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Radio Lexon

Bedienungsanleitung Radio

Neueste Bedienungsanleitung für -Kategorien-