Lexmark C760 Bedienungsanleitung
Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Lexmark C760 (5 Seiten) in der Kategorie printer. Dieser Bedienungsanleitung war für 19 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet
Seite 1/5
Lexmarkâ„¢ C76x
Clearing Jams
Guide
Avoiding jams
The following hints can help you avoid paper jams:
• Use only recommended paper. Refer to the
Card Stock & Label Guide available on the
Lexmark Web site at www.lexmark.com/
publications for more information about which
paper provides optimum results for your printing
environment.
• Do not remove paper trays while a job is
printing. Wait for a Load Tray <x> or Ready
message before you remove the tray.
• If you need detailed information before
purchasing large quantities of customized
paper, refer to the Card Stock & Label Guide.
• Do not load wrinkled, creased, or damp paper.
• Never mix media types within a tray.
• Flex, fan, and straighten paper before you load
it.
• Do not overload the trays or the multipurpose
feeder. Make sure the stack height does not
exceed the maximum height indicated.
• Push all trays firmly into the printer
after loading
them.
• Make sure the guides in the trays are properly
positioned for the size paper you have loaded.
• Do not send jobs to staple, hole punch, or offset
for transparencies, labels, or card stock.
• We recommend that transparencies, labels,
card stock, and envelopes not be sent to the
optional mailbox or optional finisher. These
specialty media types should be sent to the
standard bin.
• If a jam should occur, clear the entire paper
path. For more information, see Clearing the
entire paper path.
Clearing jams
Understanding jam messages
Area A
1 Release the levers on each side of the
multipurpose feeder to lay it flat.
2 Press the pick assembly release lever, and
remove all media and jams.
3 Return the feeder to its working position, and
reload your paper.
Area B
1 Open the left access door until it clicks into
place.
2 Remove all visible paper. Remove any torn
paper from the printer.
3 Close the door.
4 Open Tray 1, and make sure the entire paper
stack is pushed all the way down into the tray.
Message What to do
200 Paper Jam Clear Area B and Area T1.
201 Paper Jam Clear Area D, Area K, and Area L.
202 Paper Jam Clear Area K and Area L.
230 Paper Jam Clear Area E and
Area J.
24<x> Paper
Jam
Clear Area B, Area C, and Area
T<x>.
250 Paper Jam Clear Area A and Area D.
27<x> Paper
Jam
Clear Area M.
Area C
1 Open the 500-sheet drawer access door. Hold
the door down while removing jams.
2 Make sure the entire paper stack is loaded
correctly, and then close the door.
Area D
1 Open the front access door.
2 Hold down the front access door. Remove jams
in the rollers under the image transfer unit.
Area T1
1 Open tray 1.
2 Remove any jams.
3 Make sure the paper is pushed all the way down
into the tray, and then close tray 1.
Area E
1 Pull the duplex tray E completely out. Remove
any paper caught in the rollers or inside the
printer.
2 Reinstall the duplex mechanism in the printer.
Area T<x>
1 Carefully open trays 2 through 4 (all 500-sheet
trays), and then remove jams.
2 Make sure the paper is pushed all the way down
into the tray, and then close trays 2 through 4.
Area J
1 Remove the duplex tray J.
2 Remove any jams, and then reinstall the tray.
Area K
1 Open the lower right access door.
2 Remove any jams, and then close the door.
Area L
1 Open the upper right access door.
2 Remove jams from the rollers, and then close
the door.
Clearing mailbox, finisher, or
output expander jams (Area M)
1 Open the rear door of the 5-bin mailbox or
output expander.
2 Pull the jam straight out, and then close the
door.
Clearing fuser jams
1 Clear the paper path. If the jam error message
persists, go to step 2.
2 Open both the upper right and the lower right
access doors (Areas K and L).
CAUTION: The fuser assembly may be hot. Let
it cool before continuing.
3 Pull down the latches. They slide toward the
center to release the fuser.
4 Pull the fuser out, and set it on a clean, flat
surface.
5 Unsnap the housing and set it aside.
6 Lift up the fuser roller cover and remove the
jam.
7 Close the fuser roller cover.
8 Snap the housing back onto the fuser.
9 Insert the fuser back into the printer.
10 Slide the latches out, and then pull up to
refasten them.
11 Close the doors.
Clearing image transfer unit jams
1 Open the front access door and the left access
door.
2 While holding down the front access door,
insert a folded piece of paper as shown to clear
the paper sensors under the image transfer
unit. Make sure to clear the entire width of the
paper path.
3 Close the left access door and the front access
door. If the jam persists, continue with step 4.
Produktspezifikationen
Marke: | Lexmark |
Kategorie: | printer |
Modell: | C760 |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Lexmark C760 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung printer Lexmark
16 September 2024
16 September 2024
16 September 2024
14 September 2024
14 September 2024
9 September 2024
3 September 2024
3 September 2024
31 August 2024
25 August 2024
Bedienungsanleitung printer
- printer Samsung
- printer Approx
- printer HP
- printer Sony
- printer Panasonic
- printer LG
- printer Roland
- printer Canon
- printer Velleman
- printer CSL
- printer Renkforce
- printer Sharp
- printer Mitsubishi
- printer Polaroid
- printer Seiko
- printer Toshiba
- printer Olympus
- printer Citizen
- printer Olivetti
- printer Epson
- printer Dell
- printer OKI
- printer Brother
- printer Sagem
- printer Fujifilm
- printer Ricoh
- printer Datamax-O'neil
- printer Intermec
- printer Primera
- printer TSC
- printer Zebra
- printer Triumph-Adler
- printer Kodak
- printer Konica-Minolta
- printer Frama
- printer Ultimaker
- printer Fujitsu
- printer Kogan
- printer Royal Sovereign
- printer D-Link
- printer Kyocera
- printer Star
- printer Xerox
- printer Digitus
- printer Bixolon
- printer Epson 7620
- printer Fichero
- printer Ibm
- printer Oce
- printer Paxar
- printer Toshiba TEC
- printer ZKTeco
- printer StarTech.com
- printer Pantum
- printer HiTi
- printer Panduit
- printer Posiflex
- printer Vupoint Solutions
- printer Brady
- printer Star Micronics
- printer Metapace
- printer Godex
- printer Phoenix Contact
- printer Elite Screens
- printer Equip
- printer Argox
- printer Dascom
- printer EC Line
- printer Evolis
- printer Fargo
- printer DTRONIC
- printer Colop
- printer Raspberry Pi
- printer IDP
- printer Tally Dascom
- printer Custom
- printer Nisca
Neueste Bedienungsanleitung für -Kategorien-
7 Oktober 2024
5 Oktober 2024
4 Oktober 2024
3 Oktober 2024
3 Oktober 2024
2 Oktober 2024
2 Oktober 2024
2 Oktober 2024
2 Oktober 2024
2 Oktober 2024