Lenoxx H1052 Bedienungsanleitung


Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Lenoxx H1052 (4 Seiten) in der Kategorie Nicht kategorisiert. Dieser Bedienungsanleitung war für 10 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/4
Model: H1052 | Batch: PR4863
Carefully read all instructions before use and save for future reference.
Read and understand this entire manual before using this product. Keep
these instructions for future reference.
1. The appliance becomes hot during use; only touch plastic handles and
switches.
2. Avoid touching the heating elements while hot.
3. Do not cover the appliance when hot to prevent fire risk.
4. Children should not operate the appliance without supervision.
5. Do not touch the appliance with wet hands or feet.
6. Keep the appliance indoors and protect it from rain and strong sun.
7. Do not move the appliance by pulling the cord; unplug safely.
8. A light click after switching on/off is normal and indicates heating/
cooling.
9. Remove all packaging and promotional labels. Keep packing materials
out of reach of children and dispose of them according to local
regulations.
10. Ensure mains voltage matches the appliance specications.
11. The appliance is for domestic use only.
Rated Power 3x400W | 400-800-1200W
Frequency 50-60Hz
1. Before each use, inspect the appliance and cable for damages.
2. Keep the appliance away from heat sources and flammable materials.
3. Ensure a clear space of 1m in front and 0.5m on the sides.
4. Place the appliance on a flat surface; ensure the safety system contacts
the floor.
5. Position the cable away from hot surfaces and do not wind or bend it.
6. Avoid using the appliance near water sources to prevent electrical
shock.
1. Plug in and switch on; the central heating element will light up.
2. Use individual switches for other heating elements.
3. Activate the swinging function (TURN) to oscillate left and right.
4. To switch off, set all keys to “OFF,” and unplug.
1. Place the appliance on a flat, stable surface.
2. Unscrew the wing nut screws from the lower part of the body frame.
3. Insert the power cord through the slot in middle part of the base plate
and then assemble the body frame to the base plate.
4. Secure the body frame to the base plate using the two wing nuts
previously removed.


Produktspezifikationen

Marke: Lenoxx
Kategorie: Nicht kategorisiert
Modell: H1052

Brauchst du Hilfe?

Wenn Sie Hilfe mit Lenoxx H1052 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Nicht kategorisiert Lenoxx

Bedienungsanleitung Nicht kategorisiert

Neueste Bedienungsanleitung für -Kategorien-