LC-Power LC-M27-FHD-144-C Bedienungsanleitung

LC-Power Monitor LC-M27-FHD-144-C

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für LC-Power LC-M27-FHD-144-C (12 Seiten) in der Kategorie Monitor. Dieser Bedienungsanleitung war für 3 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/12
LC-M24-FHD-144-C
LC-M27-FHD-144-C
LC-M32-QHD-144-C
LC-M34-UWQHD-100-C
PC gaming monitor series
Thank you for choosing our product. Please read the manual carefully before you use the product.
1. Product overview
1.1 Monitor buttons
1. Power connector: Insert the power cable here.
2. M – menu button: Press to enter the OSD menu or to enter submenus.
3. Down arrow button: Press to move down in the menus.
4. Up arrow button: Press to move up in the menus.
5. E – exit button: Press to exit the menu.
6. Power button: Press to turn the monitor on and off.
7. LED indicator: Changes colour to indicate the status. Refer to chapter 6 for more details.
Note: The E button can also be used to switch between two color gamuts when a compatible
graphics card and either HDMI or DP connections are used.
1.2 Monitor ports (please check if available on your purchased model)
8. Audio output: Connect the audio cable from your computer's audio output to receive the audio signal on
your monitor.
9. DP port: Connect your monitor with the DP (DisplayPort) port of your computer.
10. HDMI port: Connect your monitor with the HDMI port of your computer.
11. DVI port: Connect your monitor with the DVI port of your computer.
2. Stand installation
Keep the foam underneath the monitor before attaching the stand.
1. Open the packaging, take out the product with the foam parts still attached, and gently place it on a
desktop or table. Use the included screwdriver and three no. 1 screws to fasten the base to the stem.
2. Remove the foam covering the back of the monitor, then press the button to remove the stand plate.
Use two no.1 screws to fasten the stand plate to the stem.
3. Insert the stand’s plate into the opening on the back of the monitor. It should click into place. Make sure
the stand is securely attached to the back of the monitor, then remove the remaining foam part from the
monitor and put it on a table or desk.
If needed, the stand can easily be detached from the monitor by pressing the button near the stand
plate. Make sure the monitor is laid on a flat surface before removing the stand.


Produktspezifikationen

Marke: LC-Power
Kategorie: Monitor
Modell: LC-M27-FHD-144-C

Brauchst du Hilfe?

Wenn Sie Hilfe mit LC-Power LC-M27-FHD-144-C benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Monitor LC-Power

Bedienungsanleitung Monitor

Neueste Bedienungsanleitung für -Kategorien-