Lasko 6101 Bedienungsanleitung

Lasko Heizung 6101

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Lasko 6101 (6 Seiten) in der Kategorie Heizung. Dieser Bedienungsanleitung war für 8 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/6

Rev. D 6/11 16101ESRev. D 6/11 12 6101ES

COOL-TOUCH INFRARED QUARTZ HEATER

MODEL 6101

READ AND SAVE THESE INSTRUCTIONS

READ CAREFULLY BEFORE ATTEMPTING TO ASSEMBLE,

INSTALL, OPERATE OR MAINTAIN THE PRODUCT DESCRIBED.

PROTECT YOURSELF AND OTHERS BY OBSERVING ALL

SAFETY INFORMATION. FAILURE TO COMPLY WITH

INSTRUCTIONS COULD RESULT IN PERSONAL INJURY AND/OR

PROPERTY DAMAGE!

RETAIN INSTRUCTIONS FOR FUTURE REFERENCE.

IMPORTANT INSTRUCTIONS -

OPERATING MANUAL

SAVE THESE INSTRUCTIONS

This Heater is intended for use as supplemental heat.

This Heater is for residential use only.

It is not intended to be used in commercial, industrial or agricultural settings.

MODELO 6101

NOTAS

Rev. D 6/11 2 6101ES Rev. D 6/11 11 6101ES

1. ALWAYS PLUG HEATERS DIRECTLY INTO A WALL OUTLET/RECEPTACLE. NEVER USE WITH AN EXTENSION CORD. DO NOT PLUG HEATER

INTO ANY OTHER CORD CONNECTED DEVICE, SUCH AS A POWER STRIP, SURGE PROTECTOR, MULTIPLE OUTLET ADAPTER, CORD REEL

OR OUTLET-TYPE AIR FRESHENER. THE USE OF SUCH DEVICES MAY CREATE A FIRE HAZARD. PLUG UNIT DIRECTLY INTO A 120V WALL

OUTLET ONLY.

WARNING: FAULTY WALL OUTLET CONNECTIONS MAY CAUSE THE WALL OUTLET TO OVERHEAT. BE SURE THAT HEATER PLUG FITS TIGHTLY

INTO OUTLET BEFORE EACH USE. DURING USE, CHECK TO MAKE CERTAIN THE HEATER PLUG IS NOT OVERHEATING. IF NECESSARY HAVE

A QUALIFIED ELECTRICIAN CHECK AND/OR REPLACE THE WALL OUTLET.

2. Use this Heater only as described in this manual. Any other use not recommended by the manufacturer may cause fire, electrical shock, or injury

to persons.

3. Make certain that the room is equipped with a working smoke detector.

4. Make certain that the power source conforms to the electrical requirements of the Heater.

5. Extreme caution is necessary when any Heater is used by or near children or invalids and whenever the Heater is left operating

unattended.

6. The power cord is equipped with a three-prong grounded plug that must be inserted into a matching receptacle. Under no circumstances must the grounding prong be cut off the

plug. Where a two-prong wall receptacle is encountered, it must be replaced with a properly grounded three-prong receptacle installed in accordance with the National Electrical

Code (NEC) and all applicable local codes and ordinances. This work must be done only by a qualified electrician, using copper wire only.

7. Do not operate any Heater with a damaged cord or plug or after the Heater malfunctions, or has been dropped or damaged in any manner. There are

no user serviceable parts. Please contact Customer Service at 800-233-0268 Monday through Friday from 8am to 5pm EST for assistance.

8. To disconnect Heater, turn the Heater OFF then remove the plug from the outlet.

9. Always unplug Heater when not in use. Unplug power cord before servicing or moving the Heater.

10. Do not insert or allow fingers or foreign objects to enter any ventilation or exhaust opening as it may cause an electric shock, fire, or damage the

Heater. Do not block or tamper with the Heater in any manner while it is in operation.

11. To prevent a possible fire, do not block air intakes or exhaust in any manner. Do not place on soft surfaces, like a bed, where openings may become

blocked.

12. Always place the Heater on a stable, flat, level surface when operating, to avoid the chance of the Heater overturning or moving. Locate the Power

Cord so the Heater or other objects are not resting on it. DO NOT run Power Cord under carpeting. DO NOT cover Power Cord with throw rugs,

runners, or similar coverings. Arrange Power Cord away from room traffic and where it will not be tripped over.

13. This Heater is HOT when in use. To avoid burns, do not let bare skin touch hot surfaces. Always use handle when moving this Heater. Keep com-

bustible materials, such as furniture, pillows, bedding, papers, clothes and curtains at least 3 feet (0.9 m) from the front of the Heater and keep them

at least 1 foot (0.3 m) from the sides and rear.

14. A Heater has hot and arcing or sparking parts inside. DO NOT use the Heater in areas where gasoline, paint, or flammable liquids are used or stored.

DO NOT use Heater in locations where flammable or explosive chemicals are stored, or in wet atmospheres. This Heater is intended for general use

ONLY.

15. This Heater is not intended for use in wet or damp locations. This Heater is not intended for use in bathrooms, laundry areas and similar indoor

locations. NEVER locate a Heater where it may fall into a bathtub or other water container.

16. DO NOT use Heater outdoors.

17. Remote controls for other appliances or electronic equipment can sometimes interfere with the operation of this Heater. If this occurs, move the

Heater to another location.

18. Keep Heater remote control unit away from chairs and your bed where it may be sat or laid upon and inadvertently turn on the Heater.

19. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of

the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential

installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance

with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in

a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the

equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the

receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from

that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help.The user is cautioned that changes and

modifications made to the equipment without the approval of manufacturer could void the user’s authority to operate this equipment.

20. This Heater is not suitable for use in agricultural facilities including areas where livestock, poultry or other animals are confined. Please refer to

National Electric Code (NEC) Article 547-7 (2008), or applicable state or local codes or standards relating to electrical requirements for

Agricultural Buildings. THIS HEATER DOES NOT MEET THE REQUIREMENTS OF NEC ARTICLE 547-7 (2008).

21. This Heater is not suitable for use in hazardous locations. Please refer to National Electric Code (NEC) Article 500 or applicable state or local codes

or standards relating to electrical requirements for Hazardous locations. THIS HEATER DOES NOT MEET THE REQUIREMENTS OF NEC

ARTICLE 500 (2008).17. This Heater is not suitable for use in agricultural facilities including areas where livestock, poultry or other animals are con-

fined. Please refer to National Electric Code (NEC) Article 547-7 (2008), or applicable state or local codes or standards relating to electrical

requirements for Agricultural Buildings. THIS HEATER DOES NOT MEET THE REQUIREMENTS OF NEC ARTICLE 547-7 (2008).

WARNING: REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK – DO NOT USE

THIS HEATER WITH ANY SOLID STATE SPEED CONTROL DEVICES.

IMPORTANT SAFETY INSTRUCTIONS

When using electrical appliances, basic precautions should always be followed to reduce the risk

of fire, electrical shock and injury to persons, including the following:

Read all instructions before using this Heater.

DO NOT DEPEND ON THE ON/OFF SWITCH AS THE SOLE MEANS OF DISCONNECTING POWER WHEN SERVICING OR MOVING

THE HEATER. ALWAYS UNPLUG THE POWER CORD. ALWAYS TURN OFF AND UNPLUG HEATER BEFORE LEAVING THE AREA.

NEVER LEAVE CHILDREN UNATTENDED WHEN THE HEATER IS ON OR PLUGGED IN.

SAVE THESE INSTRUCTIONS

MANTENIMIENTO

Para reducir el riesgo de choque eléctrico e incendio por favor obedezca las siguientes instrucciones.

Limpiar el Calentador regularmente ayudará a mantener su eficiencia.

- Siempre desconecte el cable eléctrico antes de mover, reparar o limpiar.

- NUNCA coloque el Calentador dentro de o cerca de agua. NO SUMERJA EL Calentador EN AGUA

- Limpie el Calentador solamente con una aspiradora equipada con un accesorio de cepillo; la aspiradora

quitará el polvo y los desperdicios del interior del Calentador.

- Aspire las parrillas de entrada cada dos semanas; esto ayudará a mantener el rendimiento óptimo del

Calentador.

- Use un cepillo de dientes u otro cepillo de cerdas suaves para aflojar suavemente cualquier polvo que no

haya sido retirado por la aspiradora

- NUNCA intente desarmar el Calentador.

- Limpie el cuerpo del Calentador únicamente con un trapo suave.

- NUNCA use ALCOHOL o SOLVENTES tales como gasolina, bencina, disolvente de pinturas u otros

limpiadores duros.

REPARACIONES: Para cualquier reparación, que no sea de mantenimiento general por parte del usuario, por favor contacte a nuestro

equipo de Servicio al Cliente al (800) 233-0268 de Lunes a Viernes de 8 a.m. a 5 p.m.

ALMACENAMIENTO: Almacene el Calentador con estas instrucciones en la caja original en un lugar fresco y seco.

El manual imprimió en la China

GARANTÍA LIMITADA DE LASKO PRODUCTS, INC. (VÁLIDO EN EE.UU., SUS TERRITORIOS, Y CANADÁ ÚNICAMENTE)

QUÉ CUBRE ESTA GARANTÍAS: Este producto está garantizado contra defectos de mano de obra y/o materiales.

CUÁNTO DURA ESTA GARANTÍA: Esta garantía se extiende únicamente al comprador original del producto y dura tres (3) años a partir de la fecha

original de compra o hasta que el comprador original del producto venda o transfiera el producto, cualesquiera de ambas que ocurriera en primer lugar.

QUÉ HARÁ LASKO: Durante el período de garantía, Lasko, a opción propia, reparará o reemplazará cualquier parte o partes que demuestren ser

defectuosas o reemplazará el producto completo por el mismo modelo u otro comparable.

QUÉ NO CUBRE ESTA GARANTÍA: Esta garantía no tiene validez si el producto fue dañado o falló debido a un accidente, manipulación u operación

inadecuadas, daño en el envío, abuso, mal uso, reparaciones no autorizadas hechas o el intento de hacerlas, o el uso del producto para servicio

comercial o no residencial. Esta garantía no cubre los costos de envío para la devolución de productos a Lasko para su reparación o reemplazo.

Lasko abonará los cargos de envío de devolución a Lasko con posterioridad a las reparaciones o el reemplazo bajo garantía.

CUALESQUIERA Y TODAS LAS GARANTÍAS, EXPLÍCITAS O IMPLÍCITAS (INCLUYENDO, SIN LIMITACIÓN, CUALESQUIERA GARANTÍA IMPLÍCITA

DE COMERCIABILIDAD), DURAN TRES AÑOS A PARTIR DE LA FECHA ORIGINAL DE COMPRA O HASTA QUE EL COMPRADOR ORIGINAL

DEL PRODUCTO VENDA O TRANSFIERA EL PRODUCTO, CUALESQUIERA DE AMBAS QUE OCURRIERA EN PRIMER LUGAR Y EN NINGÚN

CASO LA RESPONSABILIDAD DE LASKO BAJO CUALQUIER GARANTÍA EXPLÍCITA O IMPLÍCITA INCLUIRÁ (I) DAÑOS INCIDENTALES O POR

CONSECUENCIA POR CUALQUIER CAUSA QUE FUERE, O (II) REEMPLAZO O REPARACIÓN DE CUALESQUIERA FUSIBLES HOGAREÑOS,

CORTA-CIRCUITOS O TOMACORRIENTES. INDEPENDIENTEMENTE DE CUALQUIER DECLARACIÓN CONTRARIA, EN NINGÚN CASO

LA RESPONSABILIDAD DE LASKO BAJO CUALQUIER GARANTÍA EXPLÍCITA O IMPLÍCITA PODRÁ EXCEDER EL PRECIO DE COMPRA DEL

PRODUCTO Y DICHA RESPONSABILIDAD TERMINARÁ AL VENCIMIENTO DEL PERÍODO DE GARANTÍA.

Algunos estados y provincias no permiten limitaciones sobre la duración de una garantía implícita, o sobre la exclusión o limitación de los daños

incidentales o por consecuencia, por lo tanto dichas exclusiones o limitaciones podrían no aplicarse en su caso. Esta garantía le otorga a usted

derechos legales específicos. Usted también podría tener otros derechos que varían de estado en estado y de provincia en provincia.

Se requiere prueba de compra antes que se acepte un reclamo bajo garantía.

SERVICIO AL CLIENTE:

Línea gratuita (800) 233-0268. Correo electrónico: producthelp@laskoproducts.com

Nuestro equipo de Servicio al Cliente está disponible para ayudarle con preguntas sobre productos, ubicaciones de los centros de reparación y

repuestos. Se puede comunicar con nuestro equipo de Servicio al Cliente de lunes a viernes, de 8 a.m. a 5 p.m. hora del Este. Por favor tenga

disponible el número de modelo, así como también el tipo y estilo

(ubicados en la parte inferior de su producto). Customer Service Dept., 820 Lincoln Ave., West Chester, PA 19380

(Por favor no envíe el producto a esta dirección) www.laskoproducts.com

LOS REPUESTOS PARA PRODUCTOS DISCONTINUADOS, OBSOLETOS Y ALGUNOS OTROS PRODUCTOS PODRÍAN NO ESTAR DISPONIBLES.

DEBIDO A RAZONES DE SEGURIDAD, MUCHOS COMPONENTES ELECTRÓNICOS Y LA MAYORÍA DE LOS COMPONENTES DE LOS

CALENTADORES NO ESTÁN DISPONIBLES AL CONSUMIDOR PARA SU INSTALACIÓN O REEMPLAZO.

MODELO 6101

Rev. D 6/11 10 6101ES Rev. D 6/11 36101ES

MODEL 6101

Figure 1

Filter

FILTER FEATURES (Figure 3)

1. Push down on the two tabs to remove cover.

2. Clean the filter with a vacuum equipped with a brush attachment every

two weeks; this will help to maintain the optimum filter performance.

Vacuum with a brush

attachment.

Figure 2

OPERATION

1. Carefully remove the Heater from the plastic bag and the carton.

2. Place the Heater on a firm and level surface.

CAUTION: Plastic or rubber wheels may stick to furniture surfaces and/

or hardwood floors. The unit may leave a residue that could darken, stain

or leave permanent blemishes on the finish of certain furniture surfaces,

including wood surfaces, and/or hardwood floors.

3. Plug the cord set into a 120 volt outlet.

Be sure that the plug fits tightly into outlet.

When plugs fit loosely into receptacles, they may slip par-

tially or completely out of the receptacle with only the slight

movement of the attached cord. Receptacles in this condi-

tion may overheat and pose a serious fire hazard; if covered

by a curtain or drape, the fire hazard is even greater.

4. When the Heater is initially plugged in, there will be a ‘beep’ and the

Power Light will come on indicating that there is power to the unit.

The Power Light will remain lit until the Heater is unplugged from the

electrical outlet.

5. Turn the Heater ON by pressing the Power Button ( ). Note: The Heater

“fan” has a 20-second delay before turning on. The purpose of the

Delay Start Function is to allow the Infrared Quartz Element to heat

up before the fan begins to circulate the airflow.

6. Upon turning the Heater on, the unit will be in HIGH heat (1500 Watts).

7. Press the ( ) button for LOW heat.

8. To turn the Heater OFF, press the Power Button ( ). Note: The Heater

“fan” will run for 60 seconds before turning off completely. The Fan

will continue to circulate the airflow after the power is turned off to

circulate the warm air from the Infrared Heater cooling the unit down.

Unplug the Heater from the electrical outlet.

Timer Function (Figure 1)

The timer function may be activated when the Heater display is in any func-

tion or speed. This function allows you to set the length of time the Heater

will run before turning itself off, from 1 hour to 8 hours. Pressing the Timer

Button ( ) will increase the length of time by 1 hour each time this button

is pressed. After the display reflects 8 hours, pressing the Timer Button

( ) once more will reset the Heater to run continuously. The Heater will

turn off when the set time has elapsed. The unit can be turned back on by

pressing the ( ).Power Button

AUTOMATIC TEMPERATURE CONTROL (Figure 2)

The automatic temperature function will only operate on "High" heat .

You cannot set the temperature automatically when the unit is in the

low heat mode.

1. To set the room at a specific temperature press the ( ) or ( ) buttons to

the desired temperature.

2. When you reach the temperature at which you want to set the unit, the

set temperature will flash several times and then the display will return

to indicate the current room temperature and will gradually change as

the room temperature changes. NOTE: the temperature display does not

indicate the temperature of the heated air being emitted by the heater.

3. Once the room temperature reaches 2 degrees above the set tem-

perature, the Heater will shut off. Once the room temperature reaches

1 degree the set temperature, the Heater will turn back on and below

continue to cycle off and on to maintain the set temperature.

4. This function will cancel if the ( ) button is pressed. The Heater will

now be in High heat and run continuously.

NOTE: It is normal for the Heater “fan” to run for approximately 30 seconds

when the Heater shuts off after reaching the set temperature. Press the

( ) and ( ) buttons at the same time to change the display to ° Celsius.

Press the same two buttons together again to change the display back to

° Fahrenheit.

MODELO 6101

CONTROL REMOTO:

Todas las funciones realizadas con el Control Remoto operan del mismo modo que los controles manuales, excepto que usted no puede cambiar de

°F a °C con el control remoto. (Figura 4)

1. Instale las dos baterías “AAA”.

2. No mezcle baterías viejas y nuevas. No mezcle baterías alcalinas, estándar (carbono-zinc) o recargables (níquel-cadmio).

3. NO SE DESHÁGA DE BATERÍAS EN EL FUEGO. BATERÍAS PUEDEN ESTALLAR O PUEDEN SALIRSE.

Figura 4

Vista Delantara Vista Posterior

Si usted pierde su mando a distancia, por favor Cliente de llamada Serive para ordenar un reaplacement en 1-800 -233-0268, de lunes a viernes, entre

las 8 a.m. y las 5 p.m. (Horario Estándar del Este de los Estados Unidos).

CONSEJOS PARA IDENTIFICAR PROBLEMAS

Si su Calentador se apaga inesperadamente o no funciona, es probable que la función de seguridad descrita anteriormente se haya activado para impedir

el sobrecalentamiento.

1. Cerciórese de que el cable eléctrico esté enchufado en un tomacorriente en buen estado.

2. Revise su posición del Termostato. El Calentador podría estar apagado porque alcanzó la temperatura deseada.

3. El calentador portátil tiene un ventilador que seguirá funcionando aún cuando se apague el interruptor de encendido. Este ventilador va a seguir

funcionando para enfriar el calentador portátil. Una vez que el ventilador deje de funcionar, usted puede desenchufar el calentador portátil.

4. Si su Calentador opera durante varios minutos y se apaga repetidamente, es posible que el mismo requiera limpieza. Ver la sección de Mantenimiento

abajo.

Si tiene algún problema que no pueda resolverse con los pasos indicados más arriba, contacte a Asistencia Técnica al 1-800-233-0268, de lunes a viernes,

entre las 8am y las 5pm (Horario Estándar del Este de los Estados Unidos).

FUNCIÓN DE SEGURIDAD

1. Se incorpora un protector para sobrecargas térmicas a fin de impedir el sobrecalentamiento.

2. Si se alcanza una temperatura de sobrecalentamiento, el Calentador se apaga automáticamente. Sólo podrá reanudar su funcionamiento

una vez que se reinicie la unidad.

Para Reiniciar el Calentador:

1. Desenchufe el Calentador y espere 10 minutos para que la unidad se enfríe.

2. Después de 10 minutos, enchufe el Calentador nuevamente y siga la INSTRUCCIÓN DE FUNCIONAMIENTO que se describe en este

manual de instrucciones.

Save-Smart™

Press ( ) to activate the Save-Smart™ Function.

1. Set the thermostat to desired temperature using the +/-

buttons (Note: The default Save-Smart™ temperature is 72 º F)

2. When you reach the temperature at which you want to

set the unit, the set temperature will flash several times

and then the display will return to indicate the current

room temperature and will gradually change as the

room temperature changes.

3. When the air temperature is less than the set temperature,

the heater will run in HIGH heat.

4. Once the thermostat reaches the set temperature the heater

will automatically switch to LOW heat to save energy.

5. When the air temperature reaches 3º above the set temperature,

the heater will turn off. The Heater will cycle off and on in the LOW

mode to maintain the set temperature.

All this happens automatically with Lasko Save-Smart™ Technology.

To deactivate the Save-Smart™ function, press Save-Smart™

again or ( ) for continuous high/low heat.

Display reflects High Heat and Automatic

Temperature Control Function

Figure 3

Timer Function

in Low Heat

Timer Function in High Heat and

Automatic Temperature Control

"Do not remove filter"

Produktspezifikationen

Marke:	Lasko
Kategorie:	Heizung
Modell:	6101
Timer:	Ja
Breite:	425 mm
Tiefe:	323 mm
Produktfarbe:	Grau
Steuerung:	Sensor
Höhe:	425 mm
Display:	Ja
Typ:	Elektrischer Quarz-Raumheizer
Anzeigelicht:	Ja
Regelbare Temperatur:	Ja
Heizleistung:	- W
Platzierungsoptionen:	Flur
Hitzeleistung (min):	- W
Power-LED:	Ja