Lab Gruppen IPX 1200 Bedienungsanleitung

Lab Gruppen Empfänger IPX 1200

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Lab Gruppen IPX 1200 (4 Seiten) in der Kategorie Empfänger. Dieser Bedienungsanleitung war für 61 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF
Seite 1/4
Third Party Instructions
IPX Series
Item no. TP CI - IPX
V 1.0.0
2IPX Series
Introduction
The Lab.gruppen IPX Series of ampliers can be controlled directly from a Telnet
client over TCP/IP, without running the IPX Controller software. This document
describes how.
Telnet clients
In this document we assume you know the IP address of the unit you want to
address, as well as the telnet user name and password.
If you are running e.g. Windows 10 you might rst need to turn on your Windows
Telnet feature. Please see link for further instructions:
https://social.technet.microsoft.com/wiki/contents/articles/38433.windows-10-
enabling-telnet-client.aspx
Windows
1. Open a Windows Command prompt
2. Type: telnet [unit’s IP address] 23
3. Enter the user name and password
4. Now you are connected.
MAC OS-X
1. Open a Terminal window
2. Click Shell – New Remote Connection...
3. Type: telnet [unit’s IP address] 23
4. Enter the user name and password
5. Now you are connected.
Other platforms
For specic information on how to access IPX Series ampliers using other
platforms, we refer to the associated platforms user manual. Communicating
with IPXs require the use of Telnet protocol.
Controlling Settings
Some examples are available in the help menu from the interface itself.
Type “h<enter>” for help, or “x<enter>” for some examples.
All settings are addressed by 4 parameters to identify the setting,
as well as a value.
The parameters are:
• Channel: The channel you wish to apply the setting to. Input channels start
at 0 (so input one will be channel 0), output channels start at channel 128
(so output one will be channel 128). For settings that do not need a channel,
set it to zero. Set the channel by typing “c[channel] <enter>”, e.g. “c0”
then hit enter.
• Index: Some settings have multiple values per channel, and in some cases the
index is used for special cases. When in doubt, set it to zero. Set the index by
typing “i[index] <enter”.
• Item: the top level category of the setting. Set it by “m[item] <enter>”
• Sub-item: The lower level category of the setting. Set it by “n[item] <enter>”
The available settings are:
• Gain: Item 1, sub-item 1. Values are set in steps of 0.01dB, so to set the gain to
1dB, set the value to 100.
• Mute: Item 2, sub-item 2. 1=mute, 0=unmute.
• Command: Item 3, sub-item 3. The command is selected by setting the index
to the command number. See below for available commands.
• Select Preset: Item 4, sub-item 4. To load a preset, select the preset number
using this setting, then send the “Load Preset” command.
The available commands are:
• Go to standby: 4
• Exit standby: 5
• Load preset: 1
• Locate (Ping): 6
To enter the value, type “v[value] <enter>”.
After setting the desired item and value,
it must be executed by typing “e <enter>”
Third Party Instructions 3
Comand matrix > > > > > >
Function Item Sub item Channel Index number Value Execute
Gain: m1 n1 e.g. “c128” – e.g. “v120” (1,2 dB) e
Mute m2 n2 e.g. “c128” – ev1
Unmute m2 n2 e.g. “c128” – ev0
Go to standby – – em3 n3 i4
Exit standby – – em3 n3 i5
Locate (ping) m3 n3 – – ei6
Select preset m4 n4 – – “v1 - 100” e
Load preset m3 n3 – – ei1
Input channel 1 Input channel 2 No specic channelOutput channel 1 Output channel 2
Channels c0 c0c1 c128 c129
Gain values Values are set in steps of 0.01 dB, so to set the gain to 1,2 dB, set the value to 120.

Produktspezifikationen

Marke: Lab Gruppen
Kategorie: Empfänger
Modell: IPX 1200

Brauchst du Hilfe?

Wenn Sie Hilfe mit Lab Gruppen IPX 1200 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten


Bedienungsanleitung Empfänger Lab Gruppen

Lab Gruppen

Lab Gruppen PLM 8K44 BP Bedienungsanleitung

4 September 2024
Lab Gruppen

Lab Gruppen PLM 8K44 SP Bedienungsanleitung

3 September 2024
Lab Gruppen

Lab Gruppen fP 2200 Bedienungsanleitung

27 August 2024
Lab Gruppen

Lab Gruppen FP 10000Q Bedienungsanleitung

27 August 2024
Lab Gruppen

Lab Gruppen CRC-VEU-BK Bedienungsanleitung

27 August 2024
Lab Gruppen

Lab Gruppen CA602 Bedienungsanleitung

27 August 2024
Lab Gruppen

Lab Gruppen C88:4 Bedienungsanleitung

27 August 2024
Lab Gruppen

Lab Gruppen E 20:4 Bedienungsanleitung

27 August 2024
Lab Gruppen

Lab Gruppen LUCIA 240/1-70 Bedienungsanleitung

27 August 2024
Lab Gruppen

Lab Gruppen CA2402 Bedienungsanleitung

27 August 2024

Bedienungsanleitung Empfänger

Neueste Bedienungsanleitung für -Kategorien-

Rotel

Rotel RA‑1592MKII Bedienungsanleitung

16 Oktober 2024
Denon

Denon AVR-S900W Bedienungsanleitung

16 Oktober 2024
Pro-Ject

Pro-Ject Amp Box DS2 Bedienungsanleitung

15 Oktober 2024
AKG

AKG HP12U Bedienungsanleitung

15 Oktober 2024
Sennheiser

Sennheiser EM 9046 SU Bedienungsanleitung

14 Oktober 2024
Yamaha

Yamaha MusicCast RX-V481 Bedienungsanleitung

14 Oktober 2024
JL Audio

JL Audio VX600/6i Bedienungsanleitung

12 Oktober 2024
Pioneer

Pioneer SX-303RDS Bedienungsanleitung

10 Oktober 2024
Technics

Technics SA-160L Bedienungsanleitung

8 Oktober 2024
Avantree

Avantree Audiplex Bedienungsanleitung

7 Oktober 2024