La Crosse Technology WS-9412U Bedienungsanleitung

La Crosse Technology Uhr WS-9412U

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für La Crosse Technology WS-9412U (7 Seiten) in der Kategorie Uhr. Dieser Bedienungsanleitung war für 8 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/7

Contents

Language Page

English 2

French 16

Spanish 30

WS-9412U

Atomic Clock

Instruction Manual

TABLE OF CONTENTS

Topic Page

Inventory of Contents/ Additional Equipment 3

About WWVB 3

Quick Set-Up Guide 3

Detailed Set-Up Guide

Battery Installation 4

Program Mode

Function Buttons 6

Time Zone Setting 6

DST (Daylight Saving Time) Setting 6

Time Setting 7

Calendar Setting 7

Selecting ˚F or ˚C 8

Features & Operations

Displaying the Seconds 8

Indoor Temperature 9

Mounting 9

Maintenance & Care 10

Troubleshooting 11

Specifications 12

Warranty Information 12

INVENTORY OF CONTENTS

1. WS-9412U

2. Instruction manual and warranty card.

ADDITIONAL EQUIPMENT (not included)

1. Two fresh 1.5V AAA batteries.

2. One wall-hanging screw.

3. Appropriate screwdriver for screw.

ABOUT WWVB (Radio Controlled Time)

The NIST (National Institute of Standards and Technol-

ogy-Time and Frequency Division) WWVB radio station

is located in Ft. Collins, Colorado, and transmits the ex-

act time signal continuously throughout the United States

at 60 kHz. The signal can be received up to 2, 000 miles

away through the internal antenna in the Atomic Clock.

However, due to the nature of the Earth's Ionosphere,

reception is very limited during daylight hours. The

Atomic Clock will search for a signal every night when

reception is best. The WWVB radio station derives its

signal from the NIST Atomic clock in Boulder, Colorado.

A team of atomic physicists is continually measuring

every second, of every day, to an accuracy of ten bil-

lionths of a second per day. These physicists have cre-

ated an international standard, measuring a second as

9,192,631,770 vibrations of a Cesium-133 atom in a

vacuum. This Atomic Clock regulates the WWVB

transmitter.

QUICK SET-UP GUIDE

1. Insert two AAA batteries into the Atomic Clock.

2. Wait 15 minutes for WWVB reception.

3. If there is no WWVB reception, manually set the time

and date (instructions in the Program Mode).

4. Program the settings.

5. Mount the WS-9412U in a suitable location, where

WWVB signals can be received.

DETAILED SET-UP GUIDE

I. BATTERY INSTALLATION

Note:

To avoid start-up problems make sure that the bat-

teries do not spring free.

A. ATOMIC CLOCK

1. Remove the battery cover, located on the backside

of the function buttons.

2. Observe the correct polarity, and install 2 AAA

batteries.

3. Replace the battery cover.

Note:

After the batteries have been installed all the LCD's

(Liquid Crystal Display) will briefly light up. Then the

indoor temperature, the date as "1/ 1" and the weekday

as "MON" will be displayed. Also, the time will appear

as "-:--" for approximately 1 minute. Then the WWVB

search is automatically initiated, and a tower icon ap-

pears and flashes with the time colon (no tower icon will

appear if the WWVB is too weak to be detected). While

the WWVB search is being conducted various numbers

will appear in the time display. The numbers "0", "1", or

"8" will appear in the hour position and the seconds will

appear in the minute display. The Atomic Clock will ei-

ther display the WWVB time, or discontinue the search

after 10 minutes if the time is not found. When the search

is cancelled "-:--"will appear in the time LCD. The Atomic

Clock will conduct a WWVB search every hour until the

first signal is found. Once the WWVB time is found, a

search is automatically conducted nightly at midnight. If

the signal is found at midnight, the tower icon will remain,

if not, another search will take place every hour (up to 6:

00 am) until the signal is found successfully. If no signal

is found during this period, the tower icon will not appear

and the clock will search again at 12:00 am the next night.

PROGRAM MODE

To enter the Program Mode hold down the "SET" button

for 2 seconds, until the time zone flashes in the Date

LCD. The Program Mode is laid out in a manner that

allows you to program each function separately, or you

can follow the instructions entirely to program the Atomic

Clock. Complete programming is usually done for the

initial set-up, and will require you to skip step 1 of pro-

gramming sections III through VI. Wait approximately

15 seconds for the Atomic Clock to automatically return

to normal operation after completing the final step.

GB P.2 GB

P.3

GB P.4 GB

P.5

Battery Compartment

Battery Cover WWVB Tower Icon

Month/Date

Weekday

Indoor

Temperature

I. FUNCTION BUTTONS

There are 2 function buttons located on the front of the

Atomic Clock. The function buttons are labeled: SET

and +.

II. TIME ZONE SETTING

1. Hold down the "SET" button for 2 seconds, the de-

fault setting "EST" will flash in the Date LCD.

2. Press and release the "+" button to select the appro-

priate time zone. There are 13 time zones to choose

from:

EST(-5) Eastern Time (default setting)

CST(-6) Central Time

MST(-7) Mountain Time

PST(-8) Pacific Time

ALA(-9) Alaskan Time

HAW(-10) Hawaiian Time

-11

-12

GMT Greenwich Mean Time

-1

-2

-3

ATL(-4) Atlantic Time

3. Press and release the "SET" button to confirm the

time zone setting, and to advance to DST (Daylight

Saving Time) setting.

III. DST (DAYLIGHT SAVING TIME) SETTING

Note:

The DST default is "On", meaning that the WWVB

will automatically change the time according to Daylight

Saving Time in the spring and fall. For areas that do not

recognize DST changes (Arizona and parts of Indiana)

turn the DST "OFF".

1. Hold down the "SET" button for 2 seconds (the se-

lected time zone will flash), press the "SET" button

once more until "On" and "DST" alternate flash where

the Weekday normally appears.

2. Press and release the "+" button to turn the DST off,

as will be indicated by the display of "OFF" in the

time LCD.

3. Press and release the "SET" button to confirm the

DST setting, and to advance to select the manual

time setting.

IV. TIME SETTING

Note:

When the WWVB signal is found, that time will

over-ride the manually set time.

1. Hold down the "SET" button for 2 seconds (the se-

lected time zone will flash), press the "SET" button 3

more times, until the hour "12:00" flashes in the time

LCD.

2. Press and release the "+" button to select the hour.

Note:

when setting the hour, "PM" will appear to the left

of the hour display, if it is AM nothing will be displayed.

3. Press and release the "SET" button to confirm the

hour setting, and to shift to select the minutes.

4. Press and release the "+" button to select the minutes.

5. Press and release the "SET" button to confirm the

time setting, and to advance to manually set the

calendar.

V. CALENDAR SETTING

Note:

When the WWVB signal is found, that date will

over-ride the manually set date.

1. Hold down the "SET" button for 2 seconds (the se-

lected time zone will flash), press the "SET" button 4

more times, until the default year "00" flashes in the

date LCD.

2. Press and release the "+" button to select the year.

3. Press and release the "SET" button to confirm the

year, and to set the month.

4. The default month "1" will flash. Press and release

the "+" button to select the appropriate month.

5. Press and release the "SET" button to confirm the

month, and to set the date.

6. The default date "1" will flash. Press and release the

"+" button to select the appropriate date.

7. Press and release the "SET" button to confirm the

date, and to set the weekday.

8. The default weekday "MON" (depends on selected

language) will flash. Press and release the "+" but-

ton to select the appropriate weekday.

9. Press and release the "SET" button to confirm the

calendar settings, and to advance to select either ˚F

or ˚C temperature display.

VI.

SELECTING ˚F OR ˚C

1. Hold down the "SET" button for 2 seconds (the se-

lected time zone will flash), press the "SET" button

10 more times, until the default "˚F" flashes in the

time LCD.

2. Press and release the "+" button to toggle between

˚F and ˚C.

3. Press and release the "SET" button to confirm the ˚F

or ˚C selection, and exit the Program Mode.

FEATURES & OPERATIONS

I. CHANGING DISPLAY MODE (SECONDS, AND

TEMPERATURE)

There are 2 possible display modes to view the day,

seconds, and temperature. The month & date/ weekday/

indoor temperature is the default.

To change the display:

1. Press and release the "+" button. The display should

now show the month & date/ weekday/ seconds.

2. Press and release the "+" button a 2 time and the

display will return to the normal display.

II. INDOOR TEMPERATURE

The Indoor Temperature appears on the right side of the

Date LCD. The temperature is checked every 10

seconds, and updated whenever there is a change.

MOUNTING

There are two possible ways to mount the atomic clock:

• use of the foldout table stand, or

• wall mounting.

I. FOLDOUT TABLE STAND

GB P.6 GB

P.7

GB P.8 GB

P.9

Hanging Hole

Foldout Table Stand

Produktspezifikationen

Marke:	La Crosse Technology
Kategorie:	Uhr
Modell:	WS-9412U

Brauchst du Hilfe?

Wenn Sie Hilfe mit La Crosse Technology WS-9412U benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten

Ihren Namen*

Deine E-Mail*

Schreiben Sie hier Ihre Frage

Bedienungsanleitung Uhr La Crosse Technology

La Crosse Technology WT-3161WHX1 Bedienungsanleitung

4 Oktober 2024

La Crosse Technology 512-65937 Bedienungsanleitung

4 Oktober 2024

La Crosse Technology 404-3841B Bedienungsanleitung

2 Oktober 2024

La Crosse Technology 404-2636 Bedienungsanleitung

2 Oktober 2024

La Crosse Technology 404-2631GM Bedienungsanleitung

30 September 2024

La Crosse Technology 404-3015TX Bedienungsanleitung

27 September 2024

La Crosse Technology W85746-BHG Bedienungsanleitung

24 September 2024

La Crosse Technology 403-3246BR Bedienungsanleitung

22 September 2024

La Crosse Technology BBB81403 Bedienungsanleitung

21 September 2024

La Crosse Technology 513-1311OT Bedienungsanleitung

20 September 2024

Bedienungsanleitung Uhr

Neueste Bedienungsanleitung für -Kategorien-

TFA 60.3539.02 Bedienungsanleitung

7 Oktober 2024

Auriol IAN 67176 Bedienungsanleitung

6 Oktober 2024

Hager EG 493E Bedienungsanleitung

5 Oktober 2024

Auriol IAN 270532 Bedienungsanleitung

3 Oktober 2024

Cresta WK550T Bedienungsanleitung

17 September 2024

Irox LAVA Bedienungsanleitung

16 September 2024

Cresta WK210T Bedienungsanleitung

9 September 2024

IKEA SYKOMORLÖNN 005.824.61 Bedienungsanleitung

7 September 2024

Valcom V-D11040A Bedienungsanleitung

6 September 2024

Valcom V-D2440 Bedienungsanleitung

6 September 2024