La Crosse Technology WS-8158U-IT Bedienungsanleitung

La Crosse Technology Uhr WS-8158U-IT

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für La Crosse Technology WS-8158U-IT (5 Seiten) in der Kategorie Uhr. Dieser Bedienungsanleitung war für 18 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/5

WS-8158U-IT

RADIO-CONTROLLED CLOCK WITH OUTDOOR WIRELESS

TEMPERATURE AND WEATHER FORECAST

INSTRUCTION MANUAL

Contents

Language Page

__________________________________________________________________

English 1

French

Spanish

TABLE OF CONTENTS

Topic Page

Features 3

Battery Installation 4

Setting Up 5

Atomic time - WWVB Radio Controlled Time 5

Function keys 6

LCD Screen 6

Manual Settings 7

Changing the display mode 10

Alarm 10

Weather Forecast and Tendency 11

Outdoor transmitter 14

915 MHz Reception 14

Mounting 14

Care and maintenance 15

Specifications 16

Warranty 17

INSTANT TRANSMISSION is the state-of-the-

art new wireless transmission technology,

exclusively designed and developed by LA

CROSSE TECHNOLOGY. INSTANT

TRANSMISSION offers you an immediate

update (every 4 seconds!) of all your outdoor

data measured from the transmitters: follow

your climatic variations in real-time!

This product offers:

LCD1

display

Battery cover

Hanging holes

LCD2

display

Foldable stands

FEATURES:

RADIO-CONTROLLED CLOCK:

 WWVB Radio controlled time with manual time setting

 Time display: hour, minute, second

 Alarm setting with snooze function

 Calendar display

 Weekday display (3 languages to choose from: English, Spanish, French,)

 Time zone setting

 Daylight savings time ON/OFF option (DST)

 Indoor and outdoor temperature display

 Temperature display in ºF/ ºC selectable

 Weather forecast with weather tendency indicator based on air pressure

 Wireless transmission at 915MHz

 Signal reception intervals at 4 seconds

 Low battery indicator

 Wall mount or freestanding

OUTDOOR TEMPERATURE TRANSMITTER:

 Remote transmission of outdoor temperature to the

radio-controlled clock by 915 MHz signals

 Wall mounting case

Function keys

Holder

ALKALINE BATTERIES ARE RECOMMENDED FOR USE IN BOTH UNITS. AVOID USING

RECHARGEABLE BATTERIES.

TO INSTALL / REPLACE BATTERIES IN THE TEMPERATURE TRANSMITTER

(INSTALL BATTERIES IN TRANSMITTER BEFORE INSTALLING BATTERIES IN RADIO-

CONTROLLED CLOCK)

The transmitter uses 2 x AA,1.5V batteries. To install and replace the batteries, please follow

the steps below:

1. Remove the battery cover by pushing down towards bottom of transmitter and sliding

cover out.

2. Insert the batteries, observing the correct polarity (see marking inside battery

compartment).

3. Replace the battery cover on the unit.

TO INSTALL / REPLACE BATTERIES IN THE RADIO-CONTROLLED CLOCK

The radio-controlled clock uses 2 x AA,1.5V batteries. To install and replace the batteries,

please follow the steps below:

1. Insert finger or other solid object in the space at the bottom center of the battery

compartment and lift up to remove the cover.

2. Insert batteries observing the correct polarity (see marking inside battery compartment).

3. Replace compartment cover.

DO NOT SET THE CLOCK.

REPLACING BATTERY(S):

For best performance, batteries should be replaced at least once a year to maintain the best

running accuracy. Ensure that the batteries used are new and the correct size.

Please help in the preservation of the environment and return used batteries

to an authorized depot.

SETUP:

Alkaline batteries are recommended for use in both units.

NOTE: Do not set the clock until the outdoor temperature is displayed.

1. Place batteries in the outdoor transmitter first, then into the radio-controlled clock. DO

NOT PRESS ANY BUTTONS FOR 30 MINUTES.

2. After 15 minutes both the Indoor and Outdoor areas on your clock should have a

temperature showing. If not, remove both sets of batteries, wait 15 minutes and repeat

step one.

3. After 15 minutes have elapsed, the WWVB time code reception will automatically start.

This reception typically takes 10 minutes in good conditions. If after 10 minutes the

WWVB time has not been received, use the “SET” key to enter the set-up mode to

manually set the Time, Time Zone and Date (see manual settings below). The clock will

continue to search for WWVB each hour between 12am and 6am. When the clock has

successfully connected with WWVB, it will override the manually set time and date.

Note:

In the event of changing batteries of the unit, ensure that the batteries do not spring free from

the contacts. Press any button 20 times with the batteries removed. Always wait at least 10

minutes after removing batteries before reinserting, otherwise start up and transmission

problems may occur.

WWVB RADIO CONTROLLED TIME

The NIST radio station, WWVB, is located in Ft. Collins, Colorado and transmits the exact time

signal continuously throughout the United States at 60 kHz. The signal can be received up to

2,000 miles away through the internal antenna in the atomic clock. However, due to the nature

of the Earth’s Ionosphere, reception is very limited during daylight hours. The atomic clock will

search for a signal every night when reception is best. The WWVB radio station derives its

signal from the NIST atomic clock in Boulder, Colorado. A team of atomic physicists continually

measures every second of every day to an accuracy of ten billionths of a second a day. These

physicists have created an international standard, measuring a second as 9,192,631,770

vibrations of a Cesium 133 atom in a vacuum. This atomic clock regulates the WWVB

transmitter.

After 15 minutes the WWVB tower icon in the clock display will start flashing in the top center of

the LCD. This indicates the clock has detected a radio signal and is trying to receive it. When

the time code is received, the WWVB tower becomes permanently lit and the time will be

displayed.

If the tower icon flashes, but does not set the time or the WWVB tower does not appear at all,

then please take note of the following:

 Recommended distance to any interfering sources like computer monitors or TV sets is a

minimum of 6 feet (2 meters).

 Within ferro-concrete rooms (basements, superstructures), the received signal is naturally

weakened. In extreme cases, please place the unit close to a window and/ or point its

front or back towards the Fort Collins, Colorado, transmitter.

 During nighttime, the atmospheric disturbances are usually less severe and reception is

possible in most cases. A single daily reception is adequate to keep the accuracy

deviation below 1 second.

Note:

In case the atomic clock is not able to detect the WWVB-signal (disturbances, transmitting

distance, etc.), the time can be manually set (please refer to notes on Manual time setting).

FUNCTION KEYS

The radio-controlled clock has four easy to use keys:

SET key : To enter into the set mode for the following functions: time zone, DST

ON/OFF (daylight saving time), language, hour, minute, year, month, date,

weekday, ºC or ºF temperature

+ key : To toggle between the month and date, alarm and seconds display

To change any values in manual set mode

ALM key : To enter into the alarm set mode

To activate/deactivate the alarm

SNZ key : To activate the snooze function during alarm

To exit manual setting modes

LCD SCREEN DESCRIPTIONS

The radio-controlled clock's LCD is divided into 2 sections and once the batteries are inserted,

all the segments will light up briefly before displaying the information for time, date, indoor and

outdoor temperatures.

Weekday

Indoor temperature

Low battery icon (clock)

Low battery icon (transmitter)

* When the signal is successfully received by the Weather Station, the icon will be switched on.

(If not successful, the icon will not be shown in LCD) So the user can easily see whether the

last reception was successful (icon on) or not (icon off).



 If the signal reception is not successful on the first frequency (915MHz) for 30 seconds, the

frequency is changed to 920MHz and the learning is tried another 30 seconds. If still not

successful the reception is tried for 30 seconds on 910MHz. This will also be done for re-

synchronization.

MANUAL SETTINGS

Note: If the radio-controlled clock has already successfully received the WWVB time

signal and displays the correct time and date, then the Manual settings can be skipped.

After completion of the above described procedures in “Setting-up” the manual setting modes

can be entered by pressing and holding the SET key for 3 seconds. The following settings can

now be programmed:

 Time zone

 DST ON/OFF

 Language

 Manual time

 Year

 Month

 Date

Date

Outdoor temperature display

WWVB time

Radio reception icon

Alarm icon

Sensor signal reception icon*

 Weekday

 ºC or ºF

TIME ZONE

The time zone can be set between the 0 to –12 hour or Greenwich Mean Time (GMT) range in

LCD2. To do this:

1. The time zone (LCD2) will start flashing (Default setting "-5“). Select the desired time zone by

pressing and releasing the + key.

Time zone settings: -12, -11, HAW, ALA, PST, MST, CST, EST, ATL, -3, -2, -1, GMT

2. Press and release the SET key to enter the “DST Settings“.

DST (DAYLIGHT SAVING TIME)

1. The ON digit will start flashing on LCD1. Set the DST ON or OFF by pressing the + key.

2. Press and release the SET key to enter the “Language Settings“.

Note:

The DST default is “ON”, meaning that the WWVB will automatically change the time according

to Daylight Saving Time in the spring and fall. For areas that do not recognize DST changes

(Arizona and parts of Indiana) turn the DST “OFF”.

LANGUAGE

The weekdays can be displayed in LCD1 with the pre-set languages: (US) English, Spanish (E)

and French (F).

1. Set the desired language for the weekday display in LCD1 by use of the + key.

2. Press and release the SET key to enter the mode “Manual Time Settings”.

MANUAL TIME

In case the radio-controlled clock is not able to detect the WWVB-signal (disturbances,

transmitting distance, etc.); the time can be manually set. The clock will then work as a normal

Quartz clock.

Note: the time will be displayed with an additional “ ”PM for the time from 12:00 noon until

11:59.

1. The hour digits will start flashing on LCD1.

2. Set the desired hours by pressing and releasing the + key followed by pressing the SET

key.

3. Now the minute digits will start flashing.

4. Set the desired minutes by pressing and releasing the + key. If the + key is held, the units

will increase by 5.

5. Press and release the SET key to move to the “Year Setting”.

Note: The unit will still try to receive the signal every day despite it being manually set. When it

does receive the signal, it will change the manually set time into the received time. During

reception attempts the WWVB tower icon will flash. If reception has been unsuccessful, then

the WWVB tower icon will not appear but reception will still be attempted the following hour.

WWVB time reception takes place from 12:00 am through 6:00 am each day (attempts WWVB

reception every full hour within this time frame). When the time signal is received for example at

1:00 am, the radio-controlled clock will not attempt to receive the WWVB signal for the

remaining hours until 6:00 am. Therefore, the next signal attempt will take place between 12:00

am and 6:00 am the next day. The other times WWVB reception takes place, are upon setup

and after manual time set exiting mode. Reception is generally not possible during daylight

hours due to the interference of the sun.

YEAR

The year can be selected sequentially from 2001 to 2029 and will then start over again (default

setting 2006). The year will only appear in the manual setting mode.

1. The year digits will start flashing on LCD2. Select the desired year by use of the + key.

2. Press and release the SET key to switch to the “Month Setting”.

MONTH

1. The month digits on LCD2 will start flashing. Set the desired month by use of the + key.

2. Press and release the SET key to move to the mode “Date Setting”.

DATE

1. The digits for the date will start flashing on LCD2 (Default setting 1). Set the desired date

by use of the + key.

Note: The date can only be set in conjunction with the selected month. For example, it is

not possible to set the date 30 if the month of February is selected.

2. Press and release the SET key to move to “Weekday”.

WEEKDAY

1. The weekday symbols will be displayed on LCD2 in the pre-set language and flashing.

Set the desired weekday by use of the + key.

2. Press and release the SET key to enter the mode “ºC or ºF Temperature Setting”.

°C OR °F TEMPERATURE

1. The characters “°F” “°C” or will start flashing on LCD2 (Default setting °F). By use of the

+ key select “°C” for temperature display in degrees Celsius or “°F” for degrees

Fahrenheit.

2. Press and release the SET key to exit the setting mode and switch back to the normal

display mode.

EXIT THE MANUAL SETTING MODES

 To return to the normal display mode from anywhere in manual setting mode simply press

the SNZ key anytime.

 If no keys are pressed for at least 15 seconds in setting mode, the radio-controlled clock

will automatically switch back to normal display mode.

CHANGING THE DISPLAY MODE (DAY, ALARM AND SECONDS)

There are 3 possible display modes to view the day, alarm and seconds.

The indoor temperature/outdoor temperature/month&date/weekday are the default.

To change the display:

1. Press the + key. The display should now show the indoor temperature/ outdoor

temperature/ alarm/ weekday.

2. Press the + key a second time and the display will now show the indoor temperature/

outdoor temperature/ seconds/ weekday.

3. Press the + key a third time and the display will return to the normal display.

ALARM

To enter into the alarm setting mode:

1. Hold the ALM key for 4 seconds. The hour digits start flashing.

2. Press and release the + key to set the hour.

3. Press and release the ALM key to set the minutes. The minute digits start flashing.

4. Press and release the + key to set the minutes.

5. Press and release again the ALM key to exit the Alarm setting mode or wait for 15

seconds automatic timeout.

TO DEACTIVATE THE ALARM:

The alarm will be automatically ON when the alarm time is set. To deactivate the alarm (OFF),

press and release once the ALM key in normal mode display. The alarm icon will disappear, the

alarm is now off.

SNOOZE SETTING

The snooze can only be activated during alarm time for a snooze duration of 10 minutes by

pressing the SNZ key on the back of the clock.

WEATHER FORECAST

The weather forecasting feature is estimated to be 75% accurate. The weather forecast is

based solely upon the change of air pressure over time. In areas where the weather is not

affected by the change of air pressure, this feature will be less accurate.

Weather Icons

There are 3 possible weather icons that will be displayed in the LCD 2:

Sunny—indicates that the weather is expected to improve (not that the weather will be sunny).

Sun with Clouds—indicates that the weather is expected to be fair (not that the weather will be

sunny with clouds).

Clouds with Rain—indicates that the weather is expected to get worse (not that the weather

will be rainy).

Alarm icon ((())) (ON)

The weather icons change when the unit detects a change in air pressure. The icons change in

order, from “sunny” to “partly sunny” to “cloudy” or the reverse. It will not change from “sunny”

directly to “rainy”, although it is possible for the change to occur quickly. If the symbols do not

change then the weather has not changed, or the change has been slow and gradual.

Weather Tendency Arrows

Other possible displays in LCD 2 are 2 weather tendency arrows, one that points up (on the left

side of the forecast) and one that points down (on the right side of the forecast). These arrows

reflect current changes in the air pressure. An arrow pointing up indicates that the air pressure

is increasing and the weather is expected to improve or remain good. An arrow pointing down

indicates that the air pressure is decreasing and the weather is expected to become worse or

remain poor. No arrow means the pressure is stable.

OUTDOOR TEMPERATURE TRANSMITTER:

The temperature is measured and transmitted to the radio-controlled clock every 4 seconds.

The radio-controlled clock will update the temperature display every 20 seconds.

The range of the outdoor temperature transmitter may be affected by the temperature. At cold

temperatures the transmitting distance may be decreased. Please bear this in mind when

positioning the transmitter. Also the batteries may be reduced in power during periods of

extreme cold temperatures.

915MHz RECEPTION CHECK FOR OUTDOOR TEMPERATURE TRANSMITTER

The radio-controlled clock will receive the temperature data within 4 seconds. If the temperature

data is not being received 2 minutes after setting up (or the display shows “- - -”), then please

check the following points:

1. The distance of the radio-controlled clock or outdoor temperature transmitter should be at

least 6 feet (2 meters) away from any interfering sources such as computer monitors or

TV sets.

2. Avoid placing the receiver onto or in the immediate proximity of metal window frames.

3. Using other electrical products such as headphones or speakers operating on the same

signal frequency (915MHz) may prevent correct signal transmission and reception.

4. Neighbors using electrical devices operating on the 915MHz signal frequency can also

cause interference.

Produktspezifikationen

Marke:	La Crosse Technology
Kategorie:	Uhr
Modell:	WS-8158U-IT

Brauchst du Hilfe?

Wenn Sie Hilfe mit La Crosse Technology WS-8158U-IT benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten

Ihren Namen*

Deine E-Mail*

Schreiben Sie hier Ihre Frage

Bedienungsanleitung Uhr La Crosse Technology

La Crosse Technology WT-3161WHX1 Bedienungsanleitung

4 Oktober 2024

La Crosse Technology 512-65937 Bedienungsanleitung

4 Oktober 2024

La Crosse Technology 404-3841B Bedienungsanleitung

2 Oktober 2024

La Crosse Technology 404-2636 Bedienungsanleitung

2 Oktober 2024

La Crosse Technology 404-2631GM Bedienungsanleitung

30 September 2024

La Crosse Technology 404-3015TX Bedienungsanleitung

27 September 2024

La Crosse Technology W85746-BHG Bedienungsanleitung

24 September 2024

La Crosse Technology 403-3246BR Bedienungsanleitung

22 September 2024

La Crosse Technology BBB81403 Bedienungsanleitung

21 September 2024

La Crosse Technology 513-1311OT Bedienungsanleitung

20 September 2024

Bedienungsanleitung Uhr

Neueste Bedienungsanleitung für -Kategorien-

TFA 60.3539.02 Bedienungsanleitung

7 Oktober 2024

Auriol IAN 67176 Bedienungsanleitung

6 Oktober 2024

Hager EG 493E Bedienungsanleitung

5 Oktober 2024

Auriol IAN 270532 Bedienungsanleitung

3 Oktober 2024

Cresta WK550T Bedienungsanleitung

17 September 2024

Irox LAVA Bedienungsanleitung

16 September 2024

Cresta WK210T Bedienungsanleitung

9 September 2024

IKEA SYKOMORLÖNN 005.824.61 Bedienungsanleitung

7 September 2024

Valcom V-D11040A Bedienungsanleitung

6 September 2024

Valcom V-D2440 Bedienungsanleitung

6 September 2024