La Crosse Technology W88631 Bedienungsanleitung


Lesen Sie kostenlos die đź“– deutsche Bedienungsanleitung fĂĽr La Crosse Technology W88631 (6 Seiten) in der Kategorie Uhr. Dieser Bedienungsanleitung war fĂĽr 26 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/6
Model: W88631 www.lacrossetechnology.com/support Page | 1
Model: W88631
Instruction Manual
DC: 101215
ATOMIC DIGITAL ALARM CLOCK
Battery
Compartment
2 “AAA”
Battery Cover
B ACK VIEW
Time +
Alarm
Indoor
Temperature
Calendar +
Weekday
BUTTONS
FRONT VIEW
Holes
Base Stand
Model: W88631 www.lacrossetechnology.com/support Page | 2
GET STARTED
Step 1: Insert 2 new AAA Alkaline batteries (not
included) into the alarm clock. Observe the correct
polarity.
Restart: If there is no indoor temperature data after
60 seconds alarm clock, remove batteries from the ,
press any button 20 times eturn to . After 15 minutes, r
Step 1 above.
SET TIME, DATE AND TEMPERATURE
1. Hold the SET °F/°C button to enter time set
mode.
2. Press the UP or DOWN buttons to adjust
values.
3. Press the SET °F/°C button to confirm adjustments and
move to the next item.
TIME SET ORDER:
1. WWVB time signal (On/Off)
2. Time Zone time zones- 7
3. DST (Daylight Saving Time On/Off)
4. Hour
5. Minutes
6. Year
7. Month
8. Date
Press the SET °F/°C button to exit, or wait 20 seconds without
pressing buttons to return to the normal time display.
FAHRENHEIT/CELSIUS
• Press the SET °F/°C button to select temperature
readings in Fahrenheit or Celsius.
LOW BATTERY ICON
• When the icon is displayed above the
seconds, replace batteries in the clock.
Low
Battery
Icon
Model: W88631 www.lacrossetechnology.com/support Page | 3
Alarm
Bell Icon
SET TIME ALARM
Setting the alarm and activating the alarm are separate actions.
1. Hold the ALARM 2 button for
seconds to enter alarm time set
mode.
The letters “AL” will replace the
seconds and the alarm hour will
flash.
2. Press the UP or DOWN buttons
to adjust the alarm hour.
3. Press the ALARM button to
confirm and move to the alarm
minutes.
4. Press the UP or DOWN buttons
to adjust the alarm minutes.
5. Press the confirmALARM button to and exit.
Note: 0 After 1 seconds the clock will default to regular time
mode.
Alarm Time setting order:
1. Hours, 2. Minutes
ACTIVATE/DEACTIVATE TIME ALARM
• Press the ALARM . button once to enter alarm mode
The letters “AL” will replace the seconds
• Press the ALARM button again to activate the alarm.
Once activated, the bell icon appears.
• Press the ALARM button again to deactivate the
alarm. The bell icon will disappear.
SNOOZE (SILENCES ALARM TEMPORARILY)
• When alarm sounds, press the SNZ button to silence the
alarm for 10 minutes.
• The snooze icon Zz will flash.
• In snooze mode, press any button to stop alarm for one
day.
Note: The alarm is crescendo sound. The alarm will sound for 2
minutes and then shut off completely if no buttons are pressed.


Produktspezifikationen

Marke: La Crosse Technology
Kategorie: Uhr
Modell: W88631

Brauchst du Hilfe?

Wenn Sie Hilfe mit La Crosse Technology W88631 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Uhr La Crosse Technology

Bedienungsanleitung Uhr

Neueste Bedienungsanleitung fĂĽr -Kategorien-