La Crosse Technology KWS-8140-BK Bedienungsanleitung

La Crosse Technology Uhr KWS-8140-BK

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für La Crosse Technology KWS-8140-BK (10 Seiten) in der Kategorie Uhr. Dieser Bedienungsanleitung war für 3 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/10

DIGITAL ATOMIC WALL CLOCK

Indoor Temperature/Humidity

Outdoor Temperature

Moon Phase

Model KWS- -8140U IT | Instruction Manual

The features radidigital atomic wall clock o-controlled time, date, alarm, indoor temperature and humidity, and moon

phase. Wireless outdoor temperature range (open air) up to 200 feet (60.96 meters).

Atomic Wall Clock

Outdoor Temperature Transmitter: TX40U- IT

Table of Contents

Atomic Wall Clock 1

Outdoor Temperature Transmitter: TX40U- 1 IT

Features 2

Setup Instructions Step-By-Step 3

915MHz Reception Outdoor Transmitter 3

WWVB Radio-controlled Time Signal 3

Function Buttons 3

Program Menu 4

Time Zone 4

Daylight Saving Time 4

Time Set 4

5 Calendar Set

5 12/24 Hour Format

5 Fahrenheit /Celsius

Exit Program Menu 5

Display Modes 5

Alarm Set 6

Deactivate Alarm 6

6 Snooze

Moon Phase 6

Low Battery 7

Install or Replace Batteries in the Outdoor Transmitter 7

Install or Replace Batteries in the Atomic Wall 7 Clock

Position the Atomic Wall 7 Clock

Position the Outd r Transmitteroo 8

Care and Maintenance 8

Specifications 8

Warranty Information 9

FCC Statement 10

KWS- - 8140U IT

2-AA Alkaline batteries

9.17“ x 1.16“ x 8.30“

(233 x 29.4 x 210.8 mm)

Features

• Wireless outdoor temperature (°F or °C)

• Monitors indoor temperature (°F or °C)

• Monitors indoor humidity

• 12 moon phases

• Atomic time and date with manual setting

• Automatically updates for Daylight Saving Time (on/off option)

• 12/24 hour time display

• Perpetual calendar

• Time zone setting

• Time alarm with snooze

• Time display: hours, minutes, seconds

• Wall hanging or free standing

TX40U- IT

2-AAA Alkaline batteries

1.27" x 0.55" x 3.40"

( 32.4mm x 14.1 x 86.5mm)

Setup Instructions Step- -StepBy

Step 1:

• Slide the battery cover down and lift off the back of the transmitter.

• Insert 2 NEW AAA batteries (not included) into the TX40U-IT transmitter. Observe the correct polarity.

Step 2:

• Remove battery cover from atomic wall clock: insert a solid object in the space provided at the lower central position of -

the battery cover, then push up and pull out on the battery cover.

• Insert 2 NEW AA batteries (not included) into the back of the atomic wall clock. Observe the correct polarity (see

marking inside the battery compartment). The atomic wall display time and indoor temperature.clock will

• Within 3 minutes the outdoor temperature should be displayed.

• Keep the atomic wall clock and transmitter within 10 feet of each other during setup (15 minutes).

• Do Not Mix Old and New Batteries

• Do Not Mix Alkaline, Standard, Lithium or Rechargeable Batteries

915MHz Reception for Outdoor Transmitter

The atomic wall receive the temperature data within 4 seconds. If the temperature data is not being received 2 clock will

minutes after set up (or the display shows “ ”), then please check the following points:- - -

1. The distance of the atomic wall clock or outdoor temperature transmitter should be at least 6 feet (2 meters) away

from any interfering sources such as computer monitors or TV sets.

2. Avoid placing the receiver onto or in the immediate proximity of metal window frames.

3. Using other electrical products such as headphones or speakers operating on the same signal frequency (915MHz)

may prevent correct signal transmission and reception.

4. Neighbors using electrical devices operating on the 915MHz signal frequency can also cause interference.

Note: When the 915 MHz signal is received correctly, do not re-open the battery cover of either the outdoor temperature

transmitter or atomic wall clock, as the batteries may spring free from the contacts and force a false reset. Should this

happen accidentally then reset all units (see above) otherwise transmission problems may occur.SETUP

The maximum transmission range is from the outdoor temperature transmitter to the atomic wall 220 feet (60 meters)

clock (in open space). However, this depends on the surrounding environment and interference levels. If no reception is

possible despite the observation of these factors, all system units have to be reset (see SETUP).

WWVB Radio-controlled Time Signal

The NIST radio station, WWVB, is located in Ft. Collins, Colorado and transmits the exact time signal continuously

throughout the United States at 60 kHz. The signal can be received up to 2,000 miles away through the internal

antenna in the atomic wall clock. However, due to the nature of the Earth’s Ionosphere, reception is very limited

during daylight hours. The will search for a signal every night when reception is best. atomic wall clock

Once the outdoor temperature is displayed on the atomic wall clock, atomic wall clock will the WWVB tower icon in the

flash the top of the LCD. This indicates that the atomic wall clock has detected a radio signal and is trying to receive it.

When the time code is received, the WWVB tower becomes permanently lit and the time will be displayed.

If the tower icon flashes, but does not set the time or the WWVB tower does not appear at all, then please take note of the

following:

• Recommended distance to any interfering sources like computer monitors or TV sets is a minimum of 6 feet (2 meters).

• Within ferro-concrete rooms (basements, superstructures), the received signal is naturally weakened. In extreme cases,

please place the unit close to a window and/or point its front or back towards the Fort Collins, Colorado..

• During nighttime, the atmospheric disturbances are usually less severe and reception is possible in most cases. A single

daily reception is adequate to keep the accuracy deviation below 1 second.

Note: In case the atomic wall clock is not able to detect the WWVB-signal (disturbances, transmitting distance, etc.), the

time can be manually set (please see Program Menu).

Function Buttons

The hasatomic wall clock four easy to use buttons: SET + ALM SNZ

Produktspezifikationen

Marke:	La Crosse Technology
Kategorie:	Uhr
Modell:	KWS-8140-BK

Brauchst du Hilfe?

Wenn Sie Hilfe mit La Crosse Technology KWS-8140-BK benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten

Ihren Namen*

Deine E-Mail*

Schreiben Sie hier Ihre Frage

Bedienungsanleitung Uhr La Crosse Technology

La Crosse Technology WT-3161WHX1 Bedienungsanleitung

4 Oktober 2024

La Crosse Technology 512-65937 Bedienungsanleitung

4 Oktober 2024

La Crosse Technology 404-3841B Bedienungsanleitung

2 Oktober 2024

La Crosse Technology 404-2636 Bedienungsanleitung

2 Oktober 2024

La Crosse Technology 404-2631GM Bedienungsanleitung

30 September 2024

La Crosse Technology 404-3015TX Bedienungsanleitung

27 September 2024

La Crosse Technology W85746-BHG Bedienungsanleitung

24 September 2024

La Crosse Technology 403-3246BR Bedienungsanleitung

22 September 2024

La Crosse Technology BBB81403 Bedienungsanleitung

21 September 2024

La Crosse Technology 513-1311OT Bedienungsanleitung

20 September 2024

Bedienungsanleitung Uhr

Neueste Bedienungsanleitung für -Kategorien-

TFA 60.3539.02 Bedienungsanleitung

7 Oktober 2024

Auriol IAN 67176 Bedienungsanleitung

6 Oktober 2024

Hager EG 493E Bedienungsanleitung

5 Oktober 2024

Auriol IAN 270532 Bedienungsanleitung

3 Oktober 2024

Cresta WK550T Bedienungsanleitung

17 September 2024

Irox LAVA Bedienungsanleitung

16 September 2024

Cresta WK210T Bedienungsanleitung

9 September 2024

IKEA SYKOMORLÖNN 005.824.61 Bedienungsanleitung

7 September 2024

Valcom V-D11040A Bedienungsanleitung

6 September 2024

Valcom V-D2440 Bedienungsanleitung

6 September 2024