La Crosse Technology K86302 Bedienungsanleitung


Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung fĂŒr La Crosse Technology K86302 (10 Seiten) in der Kategorie Uhr. Dieser Bedienungsanleitung war fĂŒr 13 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/10
1
INTRODUCTION:
The Digital Atomic Wall Clock features radio-controlled time, date, indoor and outdoor temperature on an easy to read
display. Receives signal from the Atomic Clock in Colorado, for accurate time.
DIGITAL ATOMIC WALL CLOCK
OUTDOOR TEMPERATURE TRANSMITTER TX14
Digital Atomic Wall Clock
with Indoor/Outdoor Temperature
Model: K86302 | Instruction Manual
2
TABLE OF CONTENTS:
INTRODUCTION 1
DIGITAL ATOMIC CLOCK 1
OUTDOOR TRANSMITTER TX14 1
TABLE OF CONTENTS 2
FEATURES 3
INTIAL SETUP 3
WWVB RADIO CONTROLLED TIME 3
WWVB RECEPTION ICON 3
MANUAL SEARCH 3
BUTTON FUNCTIONS 4
PROGRAM MENU 4
WWVB RECEPTION ON/OFF 4
TIME ZONE 4
DST INDICATOR 4
12/24-HOUR TIME FORMAT 5
TIME SET 5
CALENDAR SET 5
FAHRENHEIT/CELSIUS 5
ALARM SET 5
ALARM ACTIVATION 6
SNOOZE 6
TEMPERATURE TREND ICONS 6
LOW BATTERY INDICATI 6 OR
OUTDOOR TRANSMITTER RECEPTION ICON 6
INSTALL BATTERIES IN THE DIGITAL ATOMIC CLOCK 7
INSTALL BATTERIES IN THE OUTDOOR TRANSMITTER 7
POSITIONING THE ATOMIC CLOCK 7
POSTIONING THE OUTDOOR TRANSMITTER 7
CARE AND MAINTENANCE 8
SPECIFICATIONS 8
ACCURACY 9
WARRANTY 9
FCC DISCLAIMER 10
K86302
11” W x 1.1” D x 8.54” H (280 x 28 x 217 mm)
2-AA, IEC, LR6 batteries (not included)
TX14
2.5” L x 3.98” H x 1.42” W (64 x 101 x 36mm)
2-AA, IEC, LR6 batteries (not included)
3
FEATURES:
Wireless outdoor temperature (°F or °C) with trend arrow
Monitors indoor temperature (°F or °C) with trend arrow
Atomic time and date with manual setting
Automatically updates for Daylight Saving Time (on/o option)
Time display (hour / minute)
Perpetual calendar (month / date / weekday)
Seven Time zones:
o Atlantic Time (AST)
o Eastern Time (EST)
o Central Time (CST)
o Mountain Time (MST)
o Pacic Time (PST)
o Alaskan Time (AKT)
o Hawaiian Time (HAT)
Time alarm with snooze
Wall hanging or free standing
Low battery icon for clock and sens or
INITIAL SET UP:
1. Insert 2 AA batteries (not included) into the Digital Atomic Clock ( see Install Batteries in the Digital Atomic Clock).
The Digital Atomic Clock then shows time and indoor temperature.
2. Insert 2 fresh batteries into the transmitter, observing the correct polarity (AA see Install Batteries in the Outdoor
Transmitter).
Do Not Mix Old and New Batteries
Do Not Mix Alkaline, Standard, Lithium or Rechargeable Batteries
3. Keep the transmitter 5-10 feet from the Digital Atomic Clock for 15 minutes to establish a good connection.
4. Within 3 minutes the outdoor temperature should be displayed on the Digital Atomic Clock. If the outdoor temperature
is not displayed after 3 minutes remove batteries from the transmitter and the Digital Atomic Clock for 60 seconds and
start again from step 1.
5. For optimum 433 MHz transmission, the outdoor transmitter should be placed within 200 feet (60 meters, open air)
from the Digital Atomic Clock.
Note: The Digital Atomic Clock will start searching for the WWVB time signal for 2- minutes at start up. 10
WWVB RADIO CONTROLLED TIME
The NIST radio station, WWVB, is located in Ft. Collins, Colorado and transmits the exact time signal continuously
throughout the United States at 60 kHz. The signal can be received up to 2,000 miles away through the internal antenna
in the Digital Atomic Wall Clock. However, due to the nature of the Earth’s Ionosphere, reception is very limited during
daylight hours. The Digital Atomic Clock will search for a signal every night when reception is best. The WWVB radio
station derives its signal from the NIST Atomic Clock in Boulder, Colorado.
WWVB RECEPTION ICON with full signal strength will appear on screen if the reception of atomic time is
successful.
The tower icon will show solid when the Digital Atomic Clock has received the WWVB signal.
No tower icon displayed. The Digital Atomic Clock was unable to receive a signal at this time.
Reposition the Digital Atomic Clock for better signal reception or try again at bedtime.
The Digital Atomic Clock will start searching at UTC: 07:00 and if no reception on the rst attempt it will try
again at 08: , 09:00, 10:00, and 11:00. Each attempt will be at least 2 minutes and the most will be 10 minutes. 00
If there is no signal or too much interference the receiver will only be on for 2 minutes.
If the signal is good it may catch in ABOUT 2-3 minutes.
If the signal is marginal it will try to receive a signal for up to 10 minutes.
: Hold the -/TIME button to start a manual signal search. Manual Search
Note: In case the Digital Atomic Clock is not able to detect the WWVB signal (disturbances, transmitting distance, etc.);
the time can be manually set using the Program Menu.


Produktspezifikationen

Marke: La Crosse Technology
Kategorie: Uhr
Modell: K86302

Brauchst du Hilfe?

Wenn Sie Hilfe mit La Crosse Technology K86302 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Uhr La Crosse Technology

Bedienungsanleitung Uhr

Neueste Bedienungsanleitung fĂŒr -Kategorien-