La Crosse Technology K84292 Bedienungsanleitung


Lesen Sie kostenlos die đź“– deutsche Bedienungsanleitung fĂĽr La Crosse Technology K84292 (10 Seiten) in der Kategorie Radiowecker. Dieser Bedienungsanleitung war fĂĽr 15 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/10
1
Multi-Color Atomic Alarm Clock
with USB Charging + Snooze
Model: K84292 | Instruction Manual
Introduction
The atomic alarm clock features radio-controlled time, indoor temperature, humidity and moon phase on a
colorful, and easy to read display. Includes backlight with dimmer, calendar with month, date, weekday
display and alarm with snooze. Use the integrated USB charging port to charge your smartphone, camera
or other devices while you sleep.
Multi-Color Atomic Alarm Clock
Features
Atomic time and date auto sets
Time display: hour/minutes
12/24 hour time and 10 minutes snooze alarm
7 time zones: AST, EST, CST, MST, PST, AKST, HAST
Calendar: month, day, date
USB charging port (0.5A output) for mobile devices (charging cord not included)
Indoor temperature with trend arrow
Indoor humidity with trend arrow
Moon phase
Multi-color display
Continuous illuminated backlight using AC power
Backlight dimmer (high, low, o)
Low battery icon
2
Table of Contents
Introduction 1
Multi-color Atomic Alarm Clock 1
Features 1
Table of Contents 2
Setup Instructions Step- -S 2 by tep
Troubleshooting 3
Power the Atomic Alarm Clock 3
A/C Power Adapter 3
Batteries 3
WWVB Radio-Controlled Time Reception 3
Function Buttons 4
Program Menu 4
WWVB Reception ON/OFF 4
Time Zone 4
Daylight Saving Time Indicator ON/OFF 5
12-hour or 24-hour Time Format 5
Set Time 5
Set Calendar 5
Fahrenheit/Celsius 5
Alarm Time 6
Set Alarm 6
Activate/Deactivate Alarm 6
Snooze Alarm 6
Backlight 6
A/C Power Adapter 6
Batteries 6
USB Charge Port 7
Temperature Trend Arrows 7
Humidity Trend Arrows 7
Moon Phase 7
Position the Atomic Alarm Clock 8
Specications 8
Indoor 8
Power Requirements 8
Battery Life 8
Dimensions 8
Low Battery Icon 8
Care and Maintenance 8
Warranty Information 9
Setup Instructions Step-by-Step
STEP 1:
Insert the power adapter plug into a wall outlet
Insert the 5 volt A/C power adapter into the back of the atomic alarm clock for a continuous backlight.
The atomic alarm c ck will light up and display indoor temperature and time (12:00). lo
IMPORTANT: W A/C power, the backlight and USB charging port will turn off while the hen operating on
atomic alarm clock searches for the WWVB to avoid interference. The backlight will return after 4-8
minute search (which occurs during the late night or early morning hours). The USB charging port will
then resume working.
STEP 2: (Optional battery operation)
Remove the battery cover from atomic alarm clock. Slide tab up and pull out to remove the battery
cover.
Insert 2 NEW AAA batteries (included) into the back of the atomic alarm clock. Observe the correct
polarity (see markings inside the battery compartment).
Note: When operating on battery power only, the backlight will come on for 10 seconds when the LIGHT
button is pressed.
3
Do Not Mix Old and New Batteries
Do Not Mix Alkaline, Standard, Lithium or Rechargeable Batteries
Troubleshooting
If the atomic alarm clock does not display the indoor temperature after 30 seconds, remove the A/C
power adapter (batteries) and start the setup process again.
Power the Atomic Alarm Clock
The atomic alarm clock can be powered by the 5-volt A/C adapter or batteries.
A/C Power Adapter
Insert enclosed 5-volt a/c power adapter into a wall outlet, then into the atomic alarm clock .
Batteries
1. up Slide tab and pull out to remove battery cover.
2. Install two NEW A batteries (included) according to the polarity markings. AA
Do Not Mix Old and New Batteries
Do Not Mix Alkaline, Lithium, Standard or Rechargeable Batteries
If atomic alarm clock does not display indoor temperature after 60 seconds, remove adapter and the
batteries and wait for at least 60 seconds before repeating the setup process. Time
WWVB Radio-Controlled Time
The NIST radio station, WWVB, is located in Ft. Collins, Colorado and transmits the exact time signal
continuously throughout the United States at 60 kHz. The signal can be received up to 2,000 miles away
through the internal antenna in the atomic alarm clock. However, due to the nature of the Earth’s
Ionosphere, reception is very limited during daylight hours.
The WWVB reception icon with full signal strength will appear on screen if the reception of
atomic time is successful.
When powered up the atomic alarm clock will automatically try to receive the WWVB signal every three ,
hours or example: 0:00, 3:00, 6:00......18:00, 21:00, but if at any of the above times it receives the , f
signal, it won’t search again until next day at UTC 7:00, 8:00, 9:00. 10:00, 11:00. When it successfully
receives a time update at UTC 7:00, 8:00, 9:00. 10:00, or 11:00, it will not look for an update again until
the next day.
In normal mode, push the button for three seconds to enter manual searching for the signal. -
In reception mode, push the button for three seconds to exit searching for the atomic signal. -
Note: During WWVB reception, all buttons will work. When in time set or alarm set mode, the WWVB
search will stop. When alarm rings, it will stop the WWVB search.


Produktspezifikationen

Marke: La Crosse Technology
Kategorie: Radiowecker
Modell: K84292

Brauchst du Hilfe?

Wenn Sie Hilfe mit La Crosse Technology K84292 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Radiowecker La Crosse Technology

Bedienungsanleitung Radiowecker

Neueste Bedienungsanleitung fĂĽr -Kategorien-