La Crosse Technology BBB87740X1 Bedienungsanleitung


Lesen Sie kostenlos die đź“– deutsche Bedienungsanleitung fĂĽr La Crosse Technology BBB87740X1 (18 Seiten) in der Kategorie Uhr. Dieser Bedienungsanleitung war fĂĽr 2 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/18
Model: BBB87740x1 www.lacrossetechnology.com/support Page | 1
Model: BBB87740x1
Instruction Manual
DC: 042016
18” Indoor/Outdoor Atomic Wall Clock
Get Started
1: Remove the round battery cover from the back of the clock.
2: Insert 1 fresh AA, LR6 1.5 volt ALKALINE battery according to the
polarity marked on the case.
OPTIONAL: For extended battery life, install two additional batteries to
the sides of the movement.
3: Firmly press the time zone button once. Replace battery cover.
4: , Position the clock on an exterior wall that faces Ft. Collins Colorado.
During the night, your clock will automatically set itself.
Note: The hands will move to the 12:00, 4:00 or 8:00 position and search
for the radio signal. If the radio signal the time will set If the is received .
signal is not received the clock will stay at the 12:00, 4:00 or 8:00
position and search for the WWVB time signal on the even hours. Once
the radio signal is decoded, the hands will automatically adjust to the
correct time. This may take up to 5 nights.
Round
Battery
Cover
Model: BBB87740x1 www.lacrossetechnology.com/support Page | 2
5: The default time zone is Pacific . If the clocks sets itself and Time
the hours are off, hold the correct time zone button for 5 seconds
to correct.
Position Clock
• Indoor: Choose a location 6 feet or more from electronics such as
cordless phones, wireless gaming systems, televisions, microwaves,
routers, baby monitors, etc., which can prevent signal reception.
• , CPosition near an exterior wall that faces Ft. Collins olorado for
WWVB time signal reception.
• The antenna is available for signal reception when the front or back
of the clock faces Colorado.
• Outdoor: Choose a location with an overhang to protect the clock
from the overhead sun or standing snow or rain.
• A shaded location will prevent inaccurate temperature readings.
Mount the clock on a wall with the hanging hole on the back of the
clock. Be sure the battery cover is on snug.
Manual Set Time
On rare occasions in certain areas, the clock may not be able to receive
the radio controlled time signal due to the strength of the signal or the
geographic location.
In this case, the clock can be set manually and used as a regular quartz
wall clock.
N :ote Allow up to five nights for the clock to receive the WWVB signal
before manually setting the time.
Da aylight S ving
Time Indicator
Time Zone Buttons
Time Set Tab
3 Battery
Compartments
Model: BBB87740x1 www.lacrossetechnology.com/support Page | 3
Set the clock manually:
1. 20 Remove battery for 15 minutes and press the Time Set Button
times.
2. After 15 minutes, insert the battery and allow the clock to spin to
12:00, 4:00 or 8:00.
3. Hold the Time Set Tab and the hand will spin. Continue holding s
until the correct time is achieved.
Note: You can only set the manually for about 2 minutes after the clock
battery is inserted. If the clock receives the WWVB time signal, this
signal will override manually set time.
Temperature and Humidity
The La Crosse Technology® atomic wall clock has two analog sensors
that measure surrounding temperature and humidity. The temperature
information is displayed in degrees Fahrenheit and Celsius, and humidity
data is displayed in percentage.
The thermometer and hygrometer have been calibrated at the factory.
To check the sensors accuracy, tune to your local weather forecast
information broadcast for the latest weather information. The sensors
may be adjusted.
To manually adjust the sensors, gently turn the temperature or humidity
sensor adjustment at the back of the clock until desired setting has been
reached.
Outer ring
displays
temperature
in degree
Fahrenheit
Inner ring
displays
temperature
in degree
Celsius
Humidity
display
in %
Calibration for
thermometer
C alibration for
hygrometer


Produktspezifikationen

Marke: La Crosse Technology
Kategorie: Uhr
Modell: BBB87740X1

Brauchst du Hilfe?

Wenn Sie Hilfe mit La Crosse Technology BBB87740X1 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Uhr La Crosse Technology

Bedienungsanleitung Uhr

Neueste Bedienungsanleitung fĂĽr -Kategorien-