La Crosse Technology 617-1392B Bedienungsanleitung


Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für La Crosse Technology 617-1392B (6 Seiten) in der Kategorie Radiowecker. Dieser Bedienungsanleitung war für 13 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/6
617 1392B/617 1392W- - www.lacrossetechnology.com/support Page | 1
Model: 617 1392B/617 1392W- -
Instruction Manual
DC: 051616
ATOMIC DIGITAL/ANALOG ALARM CLOCK
BUTTONS
Indoor
Temperature
+ Alarm 2
Calendar,
Weekday
+ Alarm 1
Radio-
controlled
Time
Second
Hand
Snooze Button
617 1392B/617 1392W- - www.lacrossetechnology.com/support Page | 2
Get Started
1. AAA Alkaline Insert 2 new batteries ( included) into the not
alarm clock. Observe the correct polarity.
Restart: If there is no indoor temperature data after 60
seconds, remove batteries from the , press any alarm clock
button 20 times. After 15 minutes, start again.
Set Time, Date, etc.
1. Hold the TIME SET button for 5 seconds, to enter time set
mode.
2. Press the â–² or â–¼buttons to adjust values.
3. Press the TIME SET button to confirm adjustments and
move to the next item.
Setting Order:
1. RCC time signal (On/Off)
2. 12/24 hour time format
Note: -12 hour time = Month/Date display
24-hour time = Day/Month display
3. Time Zone time zones- 4
4. Hour
5. Minutes
6. Year
7. Month
8. Date (day of the week sets automatically)
9. DST (Daylight Saving Time On/Off)
10. Fahrenheit/Celsius (°F or °C)
Press the TIME SET button to exit, or wait 15 seconds without
pressing buttons to return to the normal time display.
Date Display
The date may be displayed as the Month/Date format or as the
Date/Month format.
P
M
C
E
617 1392B/617 1392W- - www.lacrossetechnology.com/support Page | 3
1. Press the hour time and the â–² -button to select 12
Month/Date format.
2. Press the hour time and the â–² -button again to select 24
Date/Month format.
Note: From the time display, press the TIME SET button to
select Month/Date or Year to display in the lower left-hand
corner.
Set Alarm 1 or Alarm 2
The clock has two separate time alarms. Setting the alarms and
activating the alarms are separate actions.
1. Hold the AL-SET button for 2 seconds to enter alarm time
set mode for Alarm 1.
2. Press the â–² or â–¼buttons to adjust the alarm time. The
minutes and hours are set together.
3. Hold the â–² or â–¼buttons to change quickly.
4. Press the AL-SET button to confirm and A move to larm 2.
5. Press the â–² or â–¼buttons to adjust the alarm time. The
minutes and hours are set together.
6. Hold the â–² or â–¼buttons to change quickly.
7. Press the confirmAL-SET button to and exit.
Activate/Deactivate Alarm 1 and Alarm 2
• To activate or deactivate Alarm 1 or Alarm 2, use the slide
bars on the back of the clock.
• There is a slide bar (ON/OFF) for AL 1 . and for AL 2
• When active, Alarm 1 will show in the Date display with
alarm icon.
• When active, Alarm 2 will show in the Temperature display
with alarm icon.
Snooze
• When alarm sounds, press the SN ZOO E/LIGHT
button 5 to silence the alarm for minutes.
• The alarm icon will flash.
Alarm
Icon


Produktspezifikationen

Marke: La Crosse Technology
Kategorie: Radiowecker
Modell: 617-1392B

Brauchst du Hilfe?

Wenn Sie Hilfe mit La Crosse Technology 617-1392B benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Radiowecker La Crosse Technology

Bedienungsanleitung Radiowecker

Neueste Bedienungsanleitung für -Kategorien-