La Crosse Technology 513-1429THV2 Bedienungsanleitung

La Crosse Technology Uhr 513-1429THV2

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für La Crosse Technology 513-1429THV2 (2 Seiten) in der Kategorie Uhr. Dieser Bedienungsanleitung war für 20 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/2
Page 3 Page 4Page | 2
EXECUTIVE
ATOM I C CLO CK 2.0
MODEL: 51363867V2
DC: 080422
POWER UP
WWVB ATOMIC TIME SIGNAL
For more product information visit: bit.ly/laxtech_support
• The station will automatically search for the Atomic Time Signal
at power up and again at UTC 7:00, 8:00, 9:00, 10:00, and 11:00.
• Press and release the button to manually search for the
WWVB Atomic Time Signal.
• The Tower Icon will flash while searching, and be solid on
screen when the signal is received.
• For information about WWVB Atomic Time visit:
http://bit.ly/AtomicTime
FAHRENHEIT/CELSIUS SELECTION
Press the ºF/ºC button to select Fahrenheit or Celsius Temperature
display.
1. Install 2 AA batteries into your Outdoor Sensor.
2. Install 6 AA batteries into your Atomic Clock.
3. Once the sensor is reading to your clock, place it outside
in a shaded location to protect it from the sun’s heat.
See our mounting information: bit.ly/temp_mounting
TX141TH-Bv4
Outdoor Sensor 513-1429THv2
Atomic Clock
DESIRED H O UR ( TIME AD JUST)
SETTINGS
TIME ZONE
ATLANTIC
EASTERN
CENTRAL
MOUNTAIN
PACIFIC
ALASKA
HAWAII
1. Hold the button to enter the Settings Menu.
2. Use the + or - button to adjust values.
3. Press the button to confirm and move to next item.
4. Press the F/C button at any time to exit.
Settings order:
Language (English, Spanish, French, German)
Beep ON/OFF
Atomic ON/OFF
DST AUTOMATIC / DST ALWAYS OFF / DST ALWAYS ON
(Change Spring/Fall) (No change in Spring) (No change in Fall)
Time Zone
12/24 Format
• Hour
• Minutes
• Year
• Month
• Date
Month/Date or Date/Month
Notes:
The language selected in this menu will adjust the Weekday
readout and menu items.
If “Atomic OFF: is selected, menu will skip DST and Time Zone
settings and move straight to the 12/24 Hour Format setting.
Weekday sets automatically when Year, Month and Date are set.
Have your clock match other times around the world by setting a
Desired Hour, kept accurate by the Atomic time signal. only Note:
the hour can be changed.
Set Desired Hour:
1. Hold the button until the Hour flashes, “
Desired Hour
” will
show.
2. Press the + (PLUS) button to adjust the hour. Press the - (MINUS)
button to reset hour to “Local Time”.
3. Press the button to confirm and exit.
Switch between Desired Time and Local time:
• Press the button to switch between Desired Time and Local
Time.
• Desired Time is indicated with the icon.
Note: In the event of battery change or reset, these settings will
need to be readjusted.
VIEW LOCAL TIMESET DESIRED HOUR VIEW DESIRED HOUR
Page 6Page 5 Page 7 Page 8
SPECIFICATIONS
Atomic Clock (513-1429THv2):
Temperature Range: 32°F to 122°F (0°C to 50°C)
Humidity Range: 10% RH to 99% RH
Power Requirements: 6 “AA” (LR6, IEC) batteries (not included)
Battery Life: Over 24 months with reputable batteries.
Dimensions: 17.44L x 11.73 H 1.22 W 44.3cm L x 29.8cm H x 3.1cm W) x (
Outdoor Sensor (TX141TH-Bv4)
Temperature Range: -40°F to 140°F (-40°C to 60°C)
Transmission Range: Over 330 ft. open air (100 meters) RF 433MHz
Update Interval: About every 51 seconds
Power: 2-AA, IEC, LR6 batteries (not included)
Battery Life: Over 12 months
Dimensions: 1.57” L x 0.79” W x 5.12” H (4.0 L x 2.0 W x 13.0 H cm)
WAR RA N T Y I NFO
La Crosse Technology, Ltd. provides a (from date of purchase) on this product 1-year limited time warranty
relating to manufacturing defects in materials & workmanship.
La Crosse Technology, Ltd, 2830 S. 26th St., La Crosse, WI 54601
For Full Warranty Details, Visit: www.lacrossetechnology.com/pages/warranty
CA R E + M A I NT ENANCE
Do not mix old and new batteries.
Do not mix Alkaline, Lithium, standard, or rechargeable batteries.
Always purchase the correct size and grade of battery most suitable for intended use.
Clean the battery contacts and also those of the device prior to battery installation.
Ensure the batteries have with correct polarity (+ / -).
Remove batteries from equipment that will not to be used for an extended period.
Promptly remove expired batteries.
FCC S TAT EM E NT
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant
to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of
the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired
operation.
CAUTION!
Any changes or modifications not expressly approved by the party responsible for compliance could void the
user’s authority to operate the equipment.
All rights reserved. This manual may not be reproduced in any form, even in part, or duplicated or processed
using electronic, mechanical or chemical process without the written permission of the publisher.
This booklet may contain errors or misprints. The information it contains is regularly checked and corrections
are included in subsequent editions. We disclaim any responsibility for any technical error or printing error, or
their consequences. All trademarks and patents are recognized.
CA WARNING: This product can expose you to chemicals including acrylonitrile, butadiene, and styrene,
which are known to the State of California to cause cancer and birth defects or other reproductive harm.
For more information, go to: www.P65Warnings.ca.gov
If you require additional support, get in touch with our friendly customer
support team based out of La Crosse, WI.
Phone: 1-608-782-1610
Online: bit.ly/contact_techsupport
Our knowledgeable customer support team is available:
Monday-Friday, 8am-6pm CST.
JOI N THE CO N VERSAT I ON
Ask questions, watch detailed setup videos,
and provide feedback on our social media outlets!
WERE H E RE TO HELP!
CAL E NDAR DI SPLAY OPTIONS
Press the button to change how the Calendar is displayed.
Full Weekday, Month/Date/Year, Weekday/Month/Date.
BU TTO N F UNCTIONSSEARCH F O R OUTD OOR SENSOR
If you are seeing NO or dashes for your outdoor readings, please try the
following steps:
1. Hold the Plus (+) button to search for your outdoor sensor. The
Reception Indicator will begin to animate.
2. If after 3 minutes the sensor still isn’t connected, bring the sensor inside
next to the display and remove batteries from both the sensor and
clock.
3. Press any button on the clock 20 times and leave the parts sit for a few
moments with the power o.
4. Install a new set of alkaline batteries into the sensor, then into your
clock.
For additional help visit: bit.ly/basic_restart LOW BATTERY I NDICATOR
• When Battery Icon appears in Outdoor Temperature section, replace batteries
in your Outdoor Sensor.
• When Battery Icon appears in the Time section, replace batteries in your Clock.
CUSTOM TIME/ TEMPERATURE D ISPL AY
Press to search for Atomic Time Signal.
Hold to enter Settings Menu.
+ (PLUS) Settings: Press to adjust settings. Hold to adjust quickly.
Hold to search for Outdoor Sensor.
- (MINUS) Settings: Press to adjust settings. Hold to adjust quickly.
Press to switch between Desired Time or Local Time.
Hold to adjust your Desired Time hour.
Press to adjust the information displayed: Time, Desired Hour (if set)
Outdoor Temperature... etc. The Auto-Scroll Icon will show when
active.
Press to select Calendar Display.
Press to select Fahrenheit or Celsius Temperature Display.
Press the button to adjust the data displayed on screen.
• Current Time/Indoor Temp • Current Time/Outdoor Temp
• Desired Time/Indoor Temp • Outdoor Temp/Desired Time
• Indoor Temp/Desired Time • Auto-Scroll
When the Auto-scroll Icon is showing, the clock will switch
between these options every 5 seconds.
• Current Time • Desired Time • Temperature
TIME TEMPERATUREDESIRED HOUR


Produktspezifikationen

Marke: La Crosse Technology
Kategorie: Uhr
Modell: 513-1429THV2

Brauchst du Hilfe?

Wenn Sie Hilfe mit La Crosse Technology 513-1429THV2 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Uhr La Crosse Technology

Bedienungsanleitung Uhr

Neueste Bedienungsanleitung für -Kategorien-