La Crosse Technology 435-3256A-C Bedienungsanleitung


Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für La Crosse Technology 435-3256A-C (2 Seiten) in der Kategorie Uhr. Dieser Bedienungsanleitung war für 4 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/2
Model: 435-3256A-C
DC: 012821
For information about WWVB, Atomic Time Signal visit: bit.ly/AtomicTime
Page | 1Page | 4
WARRANTY INFO
La Crosse Technology, Ltd. provides a 1-year limited time warranty (from date
of purchase) on this product relating to manufacturing defects in materials &
workmanship.
La Crosse Technology, Ltd
2830 S. 26th St.
La Crosse, WI 54601
For Full Warranty Details, Visit:
www.lacrossetechnology.com/pages/warranty
CARE + MAINTENANCE
• Do not mix old and new batteries.
• Do not mix Alkaline, Lithium, standard, or rechargeable batteries.
• Always purchase the correct size and grade of battery most suitable for
intended use.
• Clean the battery contacts and also those of the device prior to battery
installation.
• Ensure the batteries have with correct polarity (+ / -).
• Remove batteries from equipment that will not to be used for an extended
period.
• Promptly remove expired batteries.
All rights reserved. This manual may not be reproduced in any form, even
in part, or duplicated or processed using electronic, mechanical or chemical
process without the written permission of the publisher.
This booklet may contain errors or misprints. The information it contains is
regularly checked and corrections are included in subsequent editions. We
disclaim any responsibility for any technical error or printing error, or their
consequences. All trademarks and patents are recognized.
WARNING: This product can expose you to chemicals including
styrene, which is known to the State of California to cause cancer. For
more information go to: www.P65Warnings.ca.gov
LIGHTED CO N S T E LL AT I O N
AT OMI C WALL CLOC K
INDOOR/OUTDOOR
POWER U P CLOCK MANUALLY SET TI M E
Page | 3Page | 2
SPECIF I CATI ONS
• Your thermometer and hygrometer have been pre-calibrated and should
not need adjustment.
• Before manually adjusting your sensors, allow the clock to sit at room
temperature for 2 hours.
• To manually adjust your sensors, gently turn the temperature or humidity
sensor adjustment on the back of the clock until desired setting is
reached.
Thermometer/Hygrometer
POWER L I GHTE D DIAL
Remove the Lighted Dial Battery Covers and insert 4 D batteries into the
Battery Compartments. IMPORTANT: Be sure all batteries are of the same
voltage.
Light Sensor Switch
Set to ON to activate the Lighted Dial in dark
conditions. Set to OFF to deactivate this function
all together and conserve batteries.
The Light Sensor is located on the front of the clock
between the six and seven. The light timer will reset
once clock is exposed to light. When it gets dark, the
Lighted Dial will stay on for 6 hours and then will
automatically shut o
ON/OFF Switch
OFF ON
D
D
Manual Set Tab
Center Battery Compartment
Time Zone Buttons
Daylight Saving Time Button
(Default is DST ON)
4
3
2
1
5Optional:
Extra Battery Compartments
PT
PT
PT
PT
PTPT MT
MT
MT
MT
MTMT CT
CT
CT
CT
CTCT ET
ET
ET
ET
ETET
AA
AA
AA
+
+
+
+
++
+
+
+
+
++
-
-
-
-
--
-
-
-
-
-- 4
3
2
1
5 5
1. Remove the round Battery Cover and insert 1 AA battery into the Center
Battery Compartment. Optional: Insert batteries into the Extra Battery
Compartments. IMPORTANT: Be sure all batteries are of the same voltage.
2. The hands will move to the 4, 8, or 12 o’clock position and stay there
while it searches for the WWVB Atomic Time Signal. Allow up to 5 nights
for the clock to receive this transmission.
3. For the best reception, place the clock on an exterior wall near a window
with the front or back of it facing Fort Collins, CO.
4. Once the Atomic Time Signal is received, the clock will set to Pacific Time.
Firmly press and hold your correct Time Zone Button until the hands begin
to spin. The time will then set correctly.
5. If you live in an area that does not follow Daylight Saving Time, while
the hands are spinning to the correct time, press the Daylight Saving
Time Button once to turn the DST setting to OFF.
Watch the setup video: bit.ly/wallclock_setup
Note: In certain areas, this clock may not be able to receive the WWVB
reception due to signal strength or interference. In this case, your clock can
be set manually until the Atomic Time Signal can be received.
1. Remove all batteries from the clock.
2. Press the Manual Set Tab at least 20 times and wait 15 minutes.
3. Insert at least one battery into the Center Battery Compartment.
4. Allow the hands to spin around and stop in either the 4, 8, or 12 o’clock
position.
5. Hold the Manual Set Tab until your correct time is achieved.
Note: The Atomic Time Signal will override your manual setting if the
transmission is received in the future.
Battery Requirements: 1 AA (IEC LR6) required in movement
Optional: 2 AA (IEC LR6) for added battery life
4 D (IEC LR20) for Lighted Dial. Batteries not included.
Battery Life: 1 Battery - 1 year, 3 Batteries - 5 years
Temperature Range: Humidity Range: 1 -20F - 120F (-28C - 48C) 0% to 90% RH
Dimensions: 21in. (53.4cm) Diameter / 3.07in. (7.8cm) Deep


Produktspezifikationen

Marke: La Crosse Technology
Kategorie: Uhr
Modell: 435-3256A-C

Brauchst du Hilfe?

Wenn Sie Hilfe mit La Crosse Technology 435-3256A-C benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Uhr La Crosse Technology

Bedienungsanleitung Uhr

Neueste Bedienungsanleitung für -Kategorien-