Klipsch SB-3 Bedienungsanleitung


Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung fĂŒr Klipsch SB-3 (24 Seiten) in der Kategorie Lautsprecher. Dieser Bedienungsanleitung war fĂŒr 7 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/24
HD THEATER SB 3
Owner's Manual
PACKING LIST
1. SOUNDBAR
2. WIRELESS SUBWOOFER
3. SOUNDBAR POWER SUPPLY/POWER CORD
4. SUBWOOFER POWER CORD
5. 4.9 FOOT (1.5M) DIGITAL OPTICAL CABLE
6. DUAL RCA CABLE
7. TWO CRADLES
8. ONE REMOTE CONTROL
9. QUICK SETUP GUIDE
10. SOUNDBAR WALL-MOUNT TEMPLATE
11. THIS OWNER’S MANUAL
SOUNDBAR FRONT
SOUNDBAR REAR
SOUNDBAR RIGHT SIDE
SUBWOOFER REAR
SUBWOOFER STATUS LIGHT
BLUE (Solid): Receiving wireless signal from soundbar
RED (Solid): Searching for soundbar wireless signal
PLACEMENT/INSTALLATION
1. Placing/wall-mounting the soundbar: The soundbar is designed to be placed on a
ïŹ‚at surface directly in front of your TV on its two supplied cradles, on a shelf direct-
ly above or below your TV in a piece of furniture or wall-mounted (via keyholes on
the rear of the soundbar) under a TV that is also wall-mounted. If wall-mounting,
ïŹrst, use the supplied wall-mount template to mount soundbar. If the two mounting
holes drill into wall studs, screw two wood screws in those holes to hang the sound-
bar on. If there are no wall studs where the holes are drilled, use wall anchors that
support at least 7 pounds (3kg) each to hang the soundbar on. Connect cable from
TV (see Connection section) to soundbar and hang soundbar on wall.
2. Placing the subwoofer: The subwoofer is designed to be placed on the ïŹ‚oor in the
same room within 50 feet (15m) of the soundbar near an electrical outlet. For
maximum bass output, place the subwoofer in a corner on the same wall as the TV
and soundbar. Once the soundbar has been connected to the TV and plugged into a
wall outlet, plug the subwoofer into a wall outlet.
POWER
OFFON
SUBWOOFER
VOLUME
MAXMIN
AC~100-240V
50/60Hz
90W
Volume Control
Status Light
Main Power ON/OFF
Power Cord Input
24V – 2.5A
60W
L
R
DC IN
POWER
ONOFF
1 2SOURCE
Main Power
Power Supply InputAnalog RCA Inputs
Digital Optical
Cable Input
TV
TV
3.5mm Analog Input
STATUS LIGHTS
SOURCE MUTE VOLUME DOWN VOLUME UP
SOUNDBAR STATUS LIGHT
RED: In STANDBY (“Sleep”) Mode
GREEN: On Digital Optical Cable Input
ORANGE: On Analog RCA L/R Input
ORANGE (Flashing): RCA Input muted
GREEN (Flashing): Digital Input muted
RED (Flashing): Failure to learn a remote
control command
GREEN OR ORANGE FLASHES: A remote
control signal has been received
BLUE:
On 3.5 mm Analog Input
RED and GREEN (Alternating):
Remote Programming
WHITE (Left Status Light):
In 3D Surround Mode
(Right status light, unless stated)


Produktspezifikationen

Marke: Klipsch
Kategorie: Lautsprecher
Modell: SB-3

Brauchst du Hilfe?

Wenn Sie Hilfe mit Klipsch SB-3 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Lautsprecher Klipsch

Bedienungsanleitung Lautsprecher

Neueste Bedienungsanleitung fĂŒr -Kategorien-