Klipsch Icon Series W Bedienungsanleitung

Klipsch Lautsprecher Icon Series W

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Klipsch Icon Series W (8 Seiten) in der Kategorie Lautsprecher. Dieser Bedienungsanleitung war für 9 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/8
Klipsch Icon Series
Owner's Manual
The exclamation point, within an equilateral triangle, is
intended to alert the user to the presence of important
operating and maintenance (servicing) instructions in
the literature accompanying the product.
The lightning flash with arrowhead symbol within an
equilateral triangle, is intended to alert the user to the
presence of uninsulated “dangerous voltage” within
the product’s enclosure that may be of sufficient
magnitude to constitute a risk of electrical shock to
persons.
1. READ these instructions.
2. KEEP these instructions.
3. HEED all warnings.
4. FOLLOW all instructions.
5. DO NOT use this apparatus near water.
6. CLEAN ONLY with dry cloth.
7. DO NOT block any ventilation openings. Install in
accordance with the manufacturer’s instructions.
8. DO NOT install near any heat sources such as radiators,
heat registers, stoves, or other apparatus (including
amplifiers) that produce heat.
9. ONLY USE attachments/accessories specified by the
manufacturer.
10. USE only with a cart, stand, tripod, bracket,
or table specified by the manufacturer, or sold
with the apparatus. When a cart is used,
use caution when moving the cart/apparatus
combination to avoid injury from tip-over.
11. DO NOT expose this apparatus to dripping or splashing and
ensure that no objects filled with liquids, such as vases,
are placed on the apparatus.
REFER all servicing to qualied service personnel.
Important Safety Information
2
These models are supplied with self-stick rubber feet to prevent
surface damage. (See Figure 1 for proper application.)
Bookshelf and Center
Thank you for your purchase of this Klipsch Icon Series Loudspeaker.
In total, there are five wood finish models within the Klipsch Icon
Series: the WF-35 and WF-34 floorstanding speakers, the WB-14
bookshelf speaker, the WC-24 center channel speaker and the WS-
24 surround channel speaker.
All of these speakers utilize a new wide dispersion Tractrix® Horn-
loaded tweeter with XTTM technology. This proprietary design radiates
sound in a smooth, enveloping 80-degree by 80-degree pattern. As
with all Klipsch horn-loaded technology, this version also produces
more output using less energy and delivers the company’s signature
dynamic sound.
Please be sure to register online at www.klipsch.com so we are
better able to serve you.
Klipsch Icon Series Loudspeaker
Your Klipsch Icon loudspeakers will perform well in a variety of loca-
tions, but best results will be achieved using the following guidelines:
Front Left and Right Speakers (See Figures 2A and 2B.)
• Place on a common wall 6 to 15 feet apart.
• If used in a home theater system, position the speakers
flanking your video display.
• Position them equal distance from the front wall (if they are
not wall-mounted).
• Position them at the same height above the oor
(for non-oor standing models) with the high frequency
drivers at seated ear height.
• Angle speakers toward the listener and even with or forward
of any adjacent obstructions (if they are not wall-mounted).
• Placing them near a corner or wall provides the greatest
amount of bass while moving the speakers away from room
boundaries reduces bass energy.
• Asymmetrical placement of a pair of speakers from adjacent
side walls can smooth room-induced bass unevenness.
• Bookshelf models may be placed on shelves, optionaloor stands
or on walls using appropriate brackets.
• Experiment with the above guidelines to suit your taste and to
compensate for your room’s acoustic characteristics.
Room Placement
WARNING:
To reduce the risk of fire or electrical shock, do not expose
this apparatus to rain or moisture.
WARNING: No nakedame sources – such as candles – should be
placed on the product.
W A R N I N G
RISK OF ELECTRIC SHOCK.
DO NOT OPEN.
WARNING: Do Not Open! Risk of Electrical Shock. Voltages in this
equipment are hazardous to life. No user-serviceable parts inside.
Refer all servicing to qualified service personnel.
Please check promptly for any transit damage. Carefully unpack
your new speaker system and verify the components against the
packing list. In extreme circumstances, items may have become
damaged in transit. If any damage is discovered, notify the delivery
service and dealer where the system was purchased. Make a
request for inspection, and follow their instructions for evaluation.
Be sure to keep the product’s original shipping carton.
Inspection
Connecting
• Your loudspeakers are equipped with positive (Red) and negative
(Black) connection terminals on the rear of the cabinet. These
correspond to the positive and negative terminals on the
appropriate channel (left, right, center, rear etc.) of your amplifier.
3
Center Channel Speaker (See Figures 2A and 2B.)
• Place immediately above or below the center of your video display.
Surround Channel Speakers (See Figures 2A, 2B and 3.)
• Place above seated ear height on side or rear walls
(approximately 4-5 feet above the floor).
• Use the attached wall brackets to hook to appropriately sized
screw heads screwed into a wall stud and wall anchor or two
wall anchors with a suitable weight bearing capacity. (See
Figure 3.)
Never use the wall bracket for mounting the speaker to
the ceiling.
On Wall Placement
• Klipsch Icon bookshelf models may be wall-mounted using
the 1/4-20 threaded insert on the rear of the speaker. Be sure
the mounting hardware you are using has the necessary load
bearing capabilities before hanging any speaker. If you use
a bracket, see the bracket owner’s manual for mounting details.
Turn your amplifier off before making any
connections.
Standard Connections (See Figure 4.)(All Models)
• All speakers in your system must be connected in phase with
the positive speaker terminal connected to the positive
amplier terminal. Repeat this for the negative speaker
terminal and amplier terminals. Most speaker wire has
distinguishing markings on the insulation of one of the
conductors to assist in correct hookup.
• Use 16 gauge (AWG), two conductor, copper wire at a
minimum and larger gauge wire for longer runs. The
connection terminals on your loudspeaker will accommodate
bare wire, spade terminals, and banana plugs.
With all connection types, take care that there is no
contact between the positive and negative terminals
at the speaker and amplifier. Damage to your equipment
may result.
WF-35 and WF-34 Standard Connections
• Use either pair of positive and negative terminals keeping the
metal coupling straps in place.
Bi-Wire Connections (See Figure 5.)
• The WF-35 and WF-34 are equipped with two pair of
connection terminals for bi-wire hookup and enhanced
performance.
• Remove the metal coupling straps.
• Connect one speaker wire (+ and -)to the top pair of binding
posts and a second speaker wire (+ and -) to the bottom pair
of binding posts.
Care and Cleaning
• Occasional dusting or wiping of the cabinet with a cloth
is all that is required. Never use abrasive or solvent type
cleaners or harsh detergents.
• A vacuum cleaner with a soft brush attachment may be used
to clean the grille fabric.
• Never spray polishes or cleaners on the drive units (woofers,
midranges or tweeters).
Bass Management
When using your speakers in a home theater system, consult
the owner’s manual of your surround electronics for proper
application of bass management settings.
• As a general rule, compact speakers (Bookshelf, Center
Channel and Surrounds) are set to the “Small,” or bass-
limited setting.
• Floorstanding speakers are typically set to the “Large,” or
full-range setting.
• Also refer to the electronics instructions for adjusting the
relative volume levels of the speakers so they are at the same
level when listened to from the primary listening position.


Produktspezifikationen

Marke: Klipsch
Kategorie: Lautsprecher
Modell: Icon Series W

Brauchst du Hilfe?

Wenn Sie Hilfe mit Klipsch Icon Series W benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Lautsprecher Klipsch

Bedienungsanleitung Lautsprecher

Neueste Bedienungsanleitung für -Kategorien-