Klipsch CA-525T Bedienungsanleitung

Klipsch Lautsprecher CA-525T

Lesen Sie kostenlos die đź“– deutsche Bedienungsanleitung fĂĽr Klipsch CA-525T (4 Seiten) in der Kategorie Lautsprecher. Dieser Bedienungsanleitung war fĂĽr 17 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF
Seite 1/4
COMMERCIAL ALL WEATHER
OUTDOOR SPEAKER
OWNER'S MANUAL
OUTDOOR SPEAKERS
IMPORTANT SAFETY INSTRUCTIONS
1. READ these instructions.
2. KEEP these instructions.
3. HEED all warnings.
4. FOLLOW all instructions.
5. DO NOT use this apparatus near water.
6. CLEAN ONLY with dry cloth.
7. DO NOT block any ventilation openings. Install in accordance with the manufacturer's
instructions.
8. DO NOT install near any heat sources such as radiators, heat registers, stoves, or other
apparatus (including amplifiers) that produce heat.
9. DO NOT defeat the safety purpose of the polarized or grounding type plug. A polarized plug
has two blades with one wider than the other. A grounding type plug has two blades and a
third grounding prong. The wider blade or the third prong are provided for your safety. If
the provided plug does not fit into your outlet, consult an electrician for replacement of the
obsolete outlet.
10. PROTECT the power cord from being walked on or pinched, particularly at plugs,
convenience receptacles, and the point where they exit from the apparatus.
11. ONLY USE attachments/accessories specified by the manufacturer.
12. or table specified by the manufacturer, or soldUSE only with a cart, stand, bracket,tripod,
with the apparatus. When a cart is used, use caution when moving the cart/apparatus
combination to avoid injury from tip-over.
13. UNPLUG this a tus during lightning storms or when unused for long periods of time.ppara
14. REFER all servicing to qualified service personnel. Servicing is required when the apparatus
has been damaged in any way, such as power-supply cord or plug is damaged, liquid has
been spilled or objects have fallen into the a tus, tus has been exposed toppara the appara
rain or moisture, does not operate normally, or has been dropped.
This symbol indicates that there are important operating and maintenance instructions
in the litera ying this unit.ture accompan
This symbol indicates that dangerous voltage constituting a risk of electric shock is
present within this unit.
WARNING: To reduce the risk of fire or electrical shock, do not expose this apparatus to rain or
moisture.
WARNING: Voltages in this equipment are hazardous to life. No user-serviceable parts inside.
Refer all servicing to qualified service personnel.
CAUTION:Changes or modifications not expressly approved by the manufacturer could void the
user’s authority to operate this device.
ABOUT YOUR KLIPSCH PURCHASE
Thank you for your purchase of Klipsch outdoor loudspeakers. After reading this manual and
connecting your system, you will hear the result of over 55 years of stringent engineering and
class-leading research and development. Like all Klipsch products, your outdoor loudspeakers
feature Klipsch Tractrix®Horn-loaded Technology—the guiding design for the first Klipschorn®
developed in 1946 and for every product that has followed. Horn-loading allows your speakers
to deliver high sensitivity, low distortion, flat frequency response and wide dispersion, which
translates to unequaled power, detail and dynamics, the hallmarks of “The Klipsch Sound.”
Please be sure to register online at www.klipsch.com/register so we are better able to serve
you. Again, thank you for choosing Klipsch and we hope that your speakers bring life to your
music for many years.
KLIPSCH CONTRACTOR ALL-WEATHER LOUDSPEAKERS
(CA-525T, CA-650T, CA-800T)
The Klipsch Reference All-Weather loudspeakers are two-way designs using a high
performance bass driver for the low frequencies. A Tractrix Horn with a 90Ëš x 90Ëš coverage
pattern is attached to a 1” diameter compression driver for clean and efficient reproduction
of the high and midrange frequencies.
(CA-800-TSW)
The CA-800-TSW is an innovative approach that delivers low frequency sound in outdoor
applications. This subwoofer has been designed to complement any of the indoor or CA
speakers and deliver strong bass response in a variety of applications. It incorporates a
built-in low-pass crossover that ensures a seamless blend between the subwoofer and the
models used for high-frequency reproduction and allows for simple wiring configurations.
Klipsch Commercial All-Weather loudspeakers are constructed from UV-resistant, glass-
reinforced polypropylene and are remarkably durable against the elements. They can be
painted to match any trim or siding color.
PLACEMENT
The Commercial All-Weather models are perfect for patios, decks, swimming pools, porch-
es or any other place where exposure to the elements makes conventional loudspeaker
usage unsuitable.
(CA-525T, CA-650T, CA-800T)
To achieve the best performance from your speakers, place the pair on the same wall
facing the listening area and space them six to fifteen feet apart. For a higher quality stereo
image, angle down, or toe in, the speakers toward the primary listening area. This is
especially important in installations that place the speakers well above ear level. Some
additional bass will result if you place the speakers in a corner or near a wall. This
provides greater bass coupling due to the additional reflected energy from the walls.
(CA-800-TSW)
The CA-800-TSW can be installed in a large variety of locations due to bass frequencies
being less directional than high frequencies. You will achieve better results if it is installed
in a corner or near a wall where additional energy can be reflected from the walls.
WALL MOUNTING
Included with your speakers are "C" style mounting brackets constructed of weather-
resistant, powder-coated zinc. These brackets attach to the speaker with the supplied low
profile knobs that thread onto the top and bottom studs protruding from the cabinet. This
allows the speaker to be angled to the left or right when mounted vertically, or up and
down when mounted horizontally.
After determining the desired location and orientation of your speakers, remove the bracket
from the loudspeaker and use it as a template to mark the location of the mounting holes.
Check the alignment of the holes with a torpedo level before drilling the pilot hole. Use
#10-12 2.5” – 3” long pan head screws to attach the bracket into a wall stud. Affix the
speaker to the bracket with the supplied knobs. Be sure to leave enough clearance
between the end of the bracket and any adjacent wall or ceiling for installation of
the knobs.
If a wall stud is not available, use the appropriate type of drywall or masonry anchor to
support the weight of the speaker, allowing for a generous safety margin. Please consult
your dealer, custom installer or building contractor in these situations.
You may also use an optional wall or ceiling mount that will fit the provided 3/8” – 16
inserts. Please see your authorized Klipsch dealer to see which model is right for you.
CONNECTIONS
The CA-525T, CA-650T, CA-800T and CA-800TSW include a multi-tap transformer for 70 or 100
volt installations. There is also a bypass position that allows normal 8 ohm operation for installa-
tions that do not require a transformer. The switch is on the back of the speaker and can be set
using a small flat head screwdriver. Make the appropriate tap selection as indicated below:
CA-525T (Transformer Power Rating: 30W)
70V: 30W, 15W, 7.5W, 3.7W, 1.7W
100V: 30W, 15W, 7.5W, 3.7W
Bypass Position: 8 ohm Nominal
CA-650T / CA-800T / CA-800TSW (Transformer Power Rating: 60W)
70V: 60W, 30W, 15W, 7.5W, 3.7W
100V: 60W, 30W, 15W, 7.5W
Bypass Position: 8 ohm Nominal
When making any type of speaker wire connection, be sure to observe proper polarity. Most
speaker wire and connectors are color-coded. Typically, red is positive (+) and black is negative
(–), or ground. It does not matter which wire conductor is connected to the positive or negative
connection of your equipment as long as it is consistent.
BUT FIRST: TYPES OF CONNECTORS
Your speaker is equipped with barrier strip connectors for inputs. Make sure that there is no
metal-to-metal contact between the two lugs. Failure to observe this precaution at either end of
the connection can result in amplifier malfunction or damage.
P GAINTIN
The grille and cabinet of your speakers may be painted. For best results, lightly sand all sur-
faces to be painted (cabinet and grille) with 300-400 grit sandpaper. Wash these surfaces
with a moistened cloth dipped into a mild detergent to remove any fingerprints or grease.
Allow speaker to dry before painting.
Care must be taken to mask off the front of the speaker to protect the tweeter, woofer and
front panel from overspray. This will maintain the existing uniform dark color behind the grille
and protect the woofer and tweeter from being damaged by the paint. Affix masking tape to
the inboard wall of the grille groove and attach plastic or newspaper to the tape to cover the
entire front panel of the speaker. Also before painting, mask the speaker wire barrier strips on
the rear of the cabinet to preserve their conductivity.
Remove the grille before painting. For best results, use several light coats of paint instead of
one heavy coat. This will help prevent the perforations in the grille from becoming clogged
with paint.
Figure 2
Figure 1
A
B
PR DU REGIS TIOO CT TRA N
Register your product online at www.klipsch.com/register
• Klipsch will keep you up-to-date on new products and promotions
• Your personal information will never be resold
• This registration information is not used for warranty purposes.
Please retain your receipt for warranty claims.

Produktspezifikationen

Marke: Klipsch
Kategorie: Lautsprecher
Modell: CA-525T

Brauchst du Hilfe?

Wenn Sie Hilfe mit Klipsch CA-525T benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten


Bedienungsanleitung Lautsprecher Klipsch

Klipsch

Klipsch R-50M Bedienungsanleitung

5 Oktober 2024
Klipsch

Klipsch Palladium P-38F Bedienungsanleitung

5 Oktober 2024
Klipsch

Klipsch Reference R-28PF Bedienungsanleitung

28 September 2024
Klipsch

Klipsch Reference CDT-2800-C II Bedienungsanleitung

23 September 2024
Klipsch

Klipsch PRO-18RC Bedienungsanleitung

21 September 2024
Klipsch

Klipsch R-5650-S II Bedienungsanleitung

21 September 2024
Klipsch

Klipsch CDT-5800-C Bedienungsanleitung

19 September 2024
Klipsch

Klipsch The Three II Bedienungsanleitung

18 September 2024
Klipsch

Klipsch Heritage La Scala AL5 Bedienungsanleitung

16 September 2024
Klipsch

Klipsch Heritage Forte IV Bedienungsanleitung

15 September 2024

Bedienungsanleitung Lautsprecher

Neueste Bedienungsanleitung fĂĽr -Kategorien-

Sonance

Sonance Visual Performance VP65 SST Bedienungsanleitung

16 Oktober 2024
Bowers And Wilkins

Bowers And Wilkins CWM664 Bedienungsanleitung

16 Oktober 2024
Focal

Focal Chorus 826 V Bedienungsanleitung

16 Oktober 2024
KEF

KEF Ci200ER Bedienungsanleitung

16 Oktober 2024
Steren

Steren SPK-1100BL Bedienungsanleitung

16 Oktober 2024
Aiwa

Aiwa SP-A100 Bedienungsanleitung

16 Oktober 2024
Trust

Trust GXT 628 Bedienungsanleitung

15 Oktober 2024
Pyle

Pyle PBMSPG6 Bedienungsanleitung

15 Oktober 2024
Marshall

Marshall Tufton Bedienungsanleitung

15 Oktober 2024
Sunstech

Sunstech SPUBT780 Bedienungsanleitung

15 Oktober 2024