Klipsch AW-400 Bedienungsanleitung

Klipsch Lautsprecher AW-400

Lesen Sie kostenlos die đź“– deutsche Bedienungsanleitung fĂĽr Klipsch AW-400 (11 Seiten) in der Kategorie Lautsprecher. Dieser Bedienungsanleitung war fĂĽr 25 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF
Seite 1/11
REFERENCE ALL WEATHER
OUTDOOR SPEAKER
OWNER'S MANUAL
OUTDOOR SPEAKERS
IMPORTANT SAFETY INST RUCT IONS
1. READ these instructions.
2. KEEP these instructions.
3. HEED all warnings.
4. FOLLOW all instructions.
5. DO NOT use this apparatus near water.
6. CLEAN ONLY with dry cloth.
7. DO NOT block any ventilation openings. Install in accordance with the manufacturer's
instructions.
8. DO NOT install near any heat sources such as radiators, heat registers, stoves, or other
apparatus (including amplifiers) that produce heat.
9. DO NOT defeat the safety purpose of the polarized or grounding type plug. A polarized plug
has two blades with one wider than the other. A grounding type plug has two blades and a
third grounding prong. The wider blade or the third prong are provided for your safety. If
the provided plug does not fit into your outlet, consult an electrician for replacement of the
obsolete outlet.
10. PROTECT the power cord from being walked on or pinched, particularly at plugs,
convenience receptacles, and the point where they exit from the apparatus.
11. ONLY USE attachments/accessories specified by the manufacturer.
12. USE only with a cart, stand, tripod, bracket, or table specified by the manufacturer, or sold
with the apparatus. When a cart is used, use caution when moving the cart/apparatus
combination to avoid injury from tip-over.
13. UNPLUG this apparatus during lightning storms or when unused for long periods of time.
14. REFER all servicing to qualified service personnel. Servicing is required when the apparatus
has been damaged in any way, such as power-supply cord or plug is damaged, liquid has
been spilled or objects have fallen into the apparatus, the apparatus has been exposed to
rain or moisture, does not operate normally, or has been dropped.
This symbol indicates that there are important operating and maintenance instructions
in the literature accompanying this unit.
This symbol indicates that dangerous voltage constituting a risk of electric shock is
present within this unit.
WARNING: To reduce the risk of fire or electrical shock, do not expose this apparatus to rain or
moisture.
WARNING: Voltages in this equipment are hazardous to life. No user-serviceable parts inside.
Refer all servicing to qualified service personnel.
CAUTION: Changes or modifications not expressly approved by the manufacturer could void the
user’s authority to operate this device.
ABOUT YOUR KLIPSCH PURCHASE
Thank you for your purchase of Klipsch outdoor loudspeakers. After reading this manual and
connecting your system, you will hear the result of over 55 years of stringent engineering and
class-leading research and development. Like all Klipsch products, your outdoor loudspeakers
feature Klipsch Tractrix
®
Horn-loaded Technology—the guiding design for the first Klipschorn
®
developed in 1946 and for every product that has followed. Horn-loading allows your speakers
to deliver high sensitivity, low distortion, flat frequency response and wide dispersion, which
translates to unequaled power, detail and dynamics, the hallmarks of “The Klipsch Sound.”
Please be sure to fill out the warranty card at the back of this manual or online at
www.klipsch.com so we are better able to serve you. Again, thank you for choosing Klipsch
and we hope that your speakers bring life to your music for many years.
KLIPSCH REFERENCE ALL-WEAT HER LOUDSPEAKERS
(AW-400, AW-500, AW-525, AW-650, AW-500-SM models)
The Klipsch Reference All-Weather loudspeakers are two-way designs using a high
performance bass driver for the low frequencies. A Tractrix Horn with a 90Ëš x 90Ëš coverage
pattern attached to a 1” diameter compression driver for clean and efficient reproduction of
the high and midrange frequencies.
(AW-800-SW)
The AW-800-SW is an innovative approach that delivers low frequency sound in outdoor
applications. This subwoofer has been designed to complement any of the Reference All-
Weather two-way speakers and deliver strong bass response in a variety of applications. It
incorporates both a low-pass crossover as well as a high-pass crossover. This ensures a
seamless blend between the subwoofer and the models used for high-frequency reproduc-
tion and allows for simple wiring configurations.
Klipsch Reference All-Weather loudspeakers are constructed from UV-resistant, glass-rein-
forced polypropylene and are remarkably durable against the elements. They can be paint-
ed to match any trim or siding color.
PLACEMENT
The Reference All-Weather models are perfect for patios, decks, swimming pools, porches
or any other place where exposure to the elements makes conventional loudspeaker usage
unsuitable.
(AW-400, AW-500, AW-525, AW-650, AW-500-SM models)
To achieve the best performance from your speakers, place the pair on the same wall
facing the listening area and space them six to fifteen feet apart. In the case of the
AW-500-SM, only one of these may be used in some installations. It is best to center the
speaker on the listening area in these cases. When two are used, follow the same place-
ment guidelines for the other models. For a higher quality stereo image, angle down, or toe
in, the speakers toward the primary listening area. This is especially important in
installations that place the speakers well above ear level. Some additional bass will result if
you place the speakers in a corner or near a wall. This provides greater bass coupling due
to the additional reflected energy from the walls.
(AW-800-SW)
The AW-800-SW can be installed in a large variety of locations due to bass frequencies
being less directional than high frequencies. You will achieve better results if it is installed
in a corner or near a wall where additional energy can be reflected from the walls.
WALL MOUNTING
Included with your speakers are "C" style mounting brackets constructed of weather-
resistant, powder-coated zinc. These brackets attach to the speaker with the supplied low
profile knobs that thread onto the top and bottom studs protruding from the cabinet. This
allows the speaker to be angled to the left or right when mounted vertically, or up and
down when mounted horizontally.
After determining the desired location and orientation of your speakers, remove the bracket
from the loudspeaker and use it as a template to mark the location of the mounting holes.
Check the alignment of the holes with a torpedo level before drilling the pilot hole. Use
#10-12 2.5” –3” long pan head screws to attach the bracket into a wall stud. Affix the
speaker to the bracket with the supplied knobs. Be sure to leave enough clearance
between the end of the bracket and any adjacent wall or ceiling for installation of
the knobs.
If a wall stud is not available, use the appropriate type of drywall or masonry anchor to
support the weight of the speaker, allowing for a generous safety margin. Please consult
your dealer, custom installer or building contractor in these situations.
(AW-500-SM model)
The AW-500-SM can operate in two modes. When using one speaker, flip the switch to the
“Stereo” position and connect the “Front” or “Main” left and right channels of your system’s
power amplifier to both inputs (See Figure 2A). When using more than one AW-500-SM,
flip the switch to the “Mono” position and connect either output of your system’s power
amplifier to either input cup (See Figure 2B).
(AW-800-SW)
The AW-800-SW can operate in two modes. If the amplifier you are using is mono, flip the
switch to the left and connect the output of your system’s amplifier to either of the two
input connectors (See Figure 3A). For stereo use, flip the switch to the right and connect
the output of your system’s amplifier to both input connectors (See Figure 3B).
You may also use an optional wall or ceiling mount that will fit the provided 3/8” – 16 inserts.
Please see your authorized Klipsch dealer to see which model is right for you.
CONNECTIONS
Note: Proper connection of your speakers to your amplifier or receiver is vital to obtaining good
sound quality. Please follow these directions carefully. Sloppy connections can cause amplifier
malfunction or damage. We recommend that you use 16-gauge or heavier stranded copper wire.
Use a lower gauge (heavier) wire for longer runs to reduce the amount of amplifier power lost due
to the wire’s resistance.
BUT FIRST: TYPES OF CONNECTORS
Bare wire. Pull the two conductors apart for about an inch and strip approximately 1/4-inch of
insulation from the end of each. (A wire stripper will simplify this, but you can use an ordinary
pocket knife to cut around and through the insulation down to the wire.) Twist the strands of wire
on each individual conductor tightly together. Loosen the nuts on a pair of binding posts until the
holes through the metal posts are exposed, then insert the bare wire through the holes. Screw the
nuts down finger-tight on the wire. Make sure that no strands of wire are touching from one bind-
ing post to the other or to any strands from the other conductor. Failure to observe this precaution
at either end of the connection can result in amplifier malfunction or damage.
Pins. Many pre-made speaker cables are terminated with metal pins. Loosen the nuts on a pair of
binding posts until the holes through the metal posts are exposed, then insert the pins through the
holes. Screw the nuts down finger-tight on the pins — do not overtighten. Make sure that there is
no metal-to-metal contact between the two pins or binding posts. Failure to observe this precau-
tion at either end of the connection can result in amplifier malfunction or damage.
Spade lugs. Some speaker cables are terminated with U-shaped connectors called spade lugs. Loosen
the nuts on a pair of binding posts and slip the spade lugs around the metal posts. Screw the nuts
down finger-tight on the lugs and inspect to ensure they have remained firmly in place. Make sure that
there is no metal-to-metal contact between the two lugs or binding posts. Failure to observe this pre-
caution at either end of the connection can result in amplifier malfunction or damage.
OTHER TYPES OF SPECIALTY CONNECTORS ARE AVAILABLE TO FACILITATE HOOKING UP YOUR SPEAKERS.
PLEASE CONSULT YOUR AUTHORIZED KLIPSCH DEALER FOR SUGGESTIONS AND FURTHER DETAILS.
SPEAKERS TO AMPLIFIER: KEEPING IT STRAIGHT
(AW-400, AW-500, AW-525, AW-650 models)
One of the most important things about hooking up your speakers is keeping them in the same
polarity, or phase. If they are connected out of phase, bass and sound imaging will be degraded.
The easiest way to ensure that your speakers are wired in phase is to always connect the positive
and negative output terminals on your amplifier or receiver to the matching input terminals on your
speakers: positive (“+”, color-coded red) to positive and negative (“–”, color-coded black) to
negative. (See Figure 1.)
Figure 3
Figure 2
Figure 1
A
B
A
B

Produktspezifikationen

Marke: Klipsch
Kategorie: Lautsprecher
Modell: AW-400

Brauchst du Hilfe?

Wenn Sie Hilfe mit Klipsch AW-400 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten


Bedienungsanleitung Lautsprecher Klipsch

Klipsch

Klipsch R-50M Bedienungsanleitung

5 Oktober 2024
Klipsch

Klipsch Palladium P-38F Bedienungsanleitung

5 Oktober 2024
Klipsch

Klipsch Reference R-28PF Bedienungsanleitung

28 September 2024
Klipsch

Klipsch Reference CDT-2800-C II Bedienungsanleitung

23 September 2024
Klipsch

Klipsch PRO-18RC Bedienungsanleitung

21 September 2024
Klipsch

Klipsch R-5650-S II Bedienungsanleitung

21 September 2024
Klipsch

Klipsch CDT-5800-C Bedienungsanleitung

19 September 2024
Klipsch

Klipsch The Three II Bedienungsanleitung

18 September 2024
Klipsch

Klipsch Heritage La Scala AL5 Bedienungsanleitung

16 September 2024
Klipsch

Klipsch Heritage Forte IV Bedienungsanleitung

15 September 2024

Bedienungsanleitung Lautsprecher

Neueste Bedienungsanleitung fĂĽr -Kategorien-

Sonance

Sonance Visual Performance VP65 SST Bedienungsanleitung

16 Oktober 2024
Bowers And Wilkins

Bowers And Wilkins CWM664 Bedienungsanleitung

16 Oktober 2024
Focal

Focal Chorus 826 V Bedienungsanleitung

16 Oktober 2024
KEF

KEF Ci200ER Bedienungsanleitung

16 Oktober 2024
Steren

Steren SPK-1100BL Bedienungsanleitung

16 Oktober 2024
Aiwa

Aiwa SP-A100 Bedienungsanleitung

16 Oktober 2024
Trust

Trust GXT 628 Bedienungsanleitung

15 Oktober 2024
Pyle

Pyle PBMSPG6 Bedienungsanleitung

15 Oktober 2024
Marshall

Marshall Tufton Bedienungsanleitung

15 Oktober 2024
Sunstech

Sunstech SPUBT780 Bedienungsanleitung

15 Oktober 2024