Kicker iKick iK350 Bedienungsanleitung

Kicker Lautsprecher iKick iK350

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Kicker iKick iK350 (21 Seiten) in der Kategorie Lautsprecher. Dieser Bedienungsanleitung war für 24 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/21
English Version
Versn Español
SISTEMA ESTEREOFÓNICO DIGITAL PARA iPhone Y iPod
Manual dal Propietario
Deutsche Version
STEREOSYSTEM FÜR iPhone Und iPod iKICK DIGITAL
Benutzerhandbuch
Version Française
SYSTÈME STERÉO NUMÉRIQUE POUR iPhone Et iPod iKICK
Manual d`utilisation
iKICKDIGITAL SYSTEM iPHONESTEREO FOR ®ANDiPOD®
2iK350 SYSTEMSTEREO
DIGITAL SYSTEM iPhoneSTEREO FOR
®
ANDiPod
®
Owner’sManual
The KICKER iKICK iK350 Digital Stereo System for iPhone and iPod is designed for Livin’ Loud” with your iPhone and
iPod in the home environment. The iK350 is fully featured with dual full-range 4” (`102mm) KICKER drivers and 1/2”
(13mm) Mylar tweeters driven by a powerful stereo amplifi er with digital signal processing. The 4.5(114mm) square
passive radiator (subwoofer) on the back of the iK350 balances the sonic output, adding the punchy low-frequency
response that put KICKER subwoofers on the map. The rotary control and infrared remote allow simple, streamlined
control of your iK350 Stereo System. The iK350 can be used with any 4th generation or newer iPod. In addition, the
iK350 boasts a wide range of connectivity options including stereo RCA outputs, composite video output, and a 1/8”
stereo auxiliary input for incorporating additional audio devices with your iK350 Stereo System. Note: Third Generation
and older iPods work by connecting their headphone output to the auxiliary input on the rear of the iK350.
Authorized KICKER Dealer:
Purchase Date:
Model Number:
Serial Number:
iK350
1. Attach the included Adjustable Device Support to the docking bay.
2. Connect your iPod to the iK350’s dock connector.
3. Plug the power cable into the DC input on the back of the iK350.
4. Plug the 2-prong electrical plug into a surge protected electrical outlet.
The iK350 will begin to authenticate your iPod. During this time, the
“DOCKLED will ash until authentication is complete. IfDOCK” continues
to ash after 60 seconds, authentication has failed; Disconnect and
reconnect the iPod. If problems persist, test another iPod or iPhone device,
or contact KICKER support or Apple support.
5. Press the rotary control knob to exit Standby mode and activate the
iK350.
DOCKING YOUR iPod Figure 1
The iK350 docking station has been optimized to match the sonic output of the iPod with the iPods EQ in theOff
setting. The iPodsSound Check should also be off; otherwise you may experience poor bass response and lower
volume levels in your music.
Model: iK350
Speaker Design 2 - Way
Woofer Size, in (mm) 4 (102)
Tweeter Size, in (mm) 1/2 (13)
Tweeter Design Mylar
Passive Radiator Size, in (mm) 4.5 X 4.5 (114 X 114)
RMS Power, Watts @ 1% Total Harmonic Distortion 2 X 10
Effective Frequency Range, Hz 65-20K
Power Supply, Volts (Ampere) 12 (3)
Height, in (mm) 8 (203)
Width, in (mm) 15 (381)
Depth, in (mm) 7 (178)
Weight, lb (kg) 7.38 (3.3)
PERFORMANCE
3
IMPORTANT SAFETY INSTRUCTIONS
Read and follow all the instructions listed in this manual. Follow all safety and procedural recommendations to prevent
damage to your self, your KICKER product, or your portable entertainment device.
The iK350 should not be used near water or in an environment where exposure to liquids is possible. This includes but is
not exclusive to areas where splashing, dripping, leaks, spills, and exposure to rain can occur. Liquid containers should
not be placed on or near the iK350 Stereo System. The iK350 Stereo System should not be cleaned with liquid cleaners.
Use only a dry cloth to clean the iK350. Only use the iK350 in areas with adequate open ventilation allowing at least 4”
of space on all sides of the iK350. Do not set the iK350 on any surface or cover the iK350 with any object that could
impede the airfl ow to and from the iK350 Stereo System. The iK350 should not be placed near any source of heat. This
includes but is not limited to stoves, radiators, heating elements, electronic heat sources, and areas where excessive
solar heat can be generated. Do not install the iK350 near any ame or place any ammable objects near the device.
The power outlet used to provide power to the iK350 should be accessible at all times. The polarized 2-prong electrical
plug has a wide blade and narrow blade that should t into the corresponding wide and narrow receiving connections
of your electrical outlet. Do not force the plug into the outlet. If the plug provided with the unit does not t, consult with
an electrician to upgrade the electrical outlet accordingly. The power cord should be situated in a way that protects it
from being pinched, walked on, tripped over, or accidentally pulled from the electrical outlet or the electrical input on the
iK350. Do not run the cable through doorways or underneath objects that could damage the wire or tear the insulating
material surrounding the wire. Only use the manufacturer supplied power supply with the iK350. We recommend using a
surge protector/power conditioner and unplugging the iK350 during any electrical storms or situations that could cause
voltage uctuations in the electrical system.
Figure 2
Figure 3 Transport Handle
1/8Stereo
Auxiliary Input
DC Power 12 Volts
LED Display
Docking Bay
Rotary Control
4” (102mm) Full-
Range Drivers
1/2(13mm) Mylar
Tweeters
Stereo RCA Outputs
Passive Square
Radiator
Composite Video Output
Magnetic Remote Storage


Produktspezifikationen

Marke: Kicker
Kategorie: Lautsprecher
Modell: iKick iK350

Brauchst du Hilfe?

Wenn Sie Hilfe mit Kicker iKick iK350 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Lautsprecher Kicker

Bedienungsanleitung Lautsprecher

Neueste Bedienungsanleitung für -Kategorien-