Kicker DXA250.1 Bedienungsanleitung

Kicker Empfänger DXA250.1

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Kicker DXA250.1 (24 Seiten) in der Kategorie Empfänger. Dieser Bedienungsanleitung war für 12 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF
Seite 1/24
DXA
AMPLIFIERS
Owner’s Manual
DXA250.1 | DXA500.1
DXA1000.1 | DXA1500.1
Manual del Propietario | Español
AMPLIFICADOR DEL LA SERIE DXA.1
Benutzerhandbuch | Deutsch
MONOVERSTÄRKER DER DXA.1-SERIE
Manuel d’utilisation | Française
AMPLIFICATEUR DE SÉRIE DXA.1
2014 DXA Mono Amps Rev B.indd 1
2014 DXA Mono Amps Rev B.indd 1
2014 DXA Mono Amps Rev B.indd 1
2014 DXA Mono Amps Rev B.indd 12014 DXA Mono Amps Rev B.indd 1 8/2/2013 3:12:12 PM
8/2/2013 3:12:12 PM
8/2/2013 3:12:12 PM
8/2/2013 3:12:12 PM8/2/2013 3:12:12 PM
2
DXA.1-SERIES AMPLIFIERS
OWNER’S MANUAL
INSTALLATION
Mounting: Choose a structurally sound location to mount your KICKER amplifi er. Make sure there are no items
behind the area where the screws will be driven. Choose a location that allows at least 4” (10cm) of open
ventilation for the amplifi er. If possible, mount the amplifi er in the climate-controlled passenger compartment. Drill
four holes using a 7/64” (3mm) bit and use the supplied #8 screws to mount the amplifi er.
Wiring: Disconnect the vehicle’s battery to avoid an electrical short. Then, connect the ground wire to the
amplifi er. Make the ground wire short, 24” (60cm) or less, and connect it to a paint-and-corrosion-free, solid,
metal area of the vehicle’s chassis. Adding an additional ground wire of this same gauge (or larger) between the
battery’s negative post and the vehicle chassis is recommended.
The DXA amplifi er has dual input sensitivity differential RCA inputs which will receive either high or low level
signals from your car stereo’s source unit. A high-level signal can be run from the source unit’s speaker outputs
to the stereo RCA input on the end panel of the amplifi er using the KICKER KISL as shown (make sure you set
the DXA amplifi er’s input level switch to “HI”). Alternatively, the signal can be delivered to the amplifi er using the
low-level RCA outputs on the source unit. Set the input level switch on the end panel of the amplifi er to “LO”.
Either input method will provide a low-level output signal at the RCA output, which effectively passes the audio
signal to another amplifi er or component. Keep the audio signal cable away from factory wiring harnesses and
other power wiring. If you need to cross this wiring, cross it at a 90 degree angle.
PERFORMANCE
Authorized KICKER Dealer:
Purchase Date:
Model Number:
Serial Number:
Model: DXA250.1 DXA500.1 DXA1000.1 DXA1500.1
RMS Power [Watts]
@ 14.4V, 4Ω mono, ≤ 1% THD+N
@ 14.4V, 2Ω mono, ≤ 1% THD+N
125 x 1
250 x 1
250 x 1
500 x 1
500 x 1
1000 x 1
750 x 1
1500 x 1
Length [in, cm] 8-1/8, 21 8-1/8, 21 12-1/16, 31 14, 36
Specifi cations common to all models:
Height [in, cm] 2-3/8, 6
Width [in, cm] 7-3/16, 18
Frequency Response [Hz] 25–200
Signal-to-Noise Ratio [dB] >95, A-weighted, re: rated power
Input Sensitivity Low Level: 125mV–5V
High Level: 250mV–10V
Electronic Crossover Variable Lo-pass 50Hz–200Hz, 12dB/octave
KickEQ™ Bass Boost Variable 0–12dB @ 40Hz
Subsonic Filter 25Hz, 24dB/octave
Remote Bass Yes (sold separately)
MODEL: DXA250.1 | DXA500.1 | DXA1000.1 | DXA1500.1
2014 DXA Mono Amps Rev B.indd 2
2014 DXA Mono Amps Rev B.indd 2
2014 DXA Mono Amps Rev B.indd 2
2014 DXA Mono Amps Rev B.indd 22014 DXA Mono Amps Rev B.indd 2 8/2/2013 3:12:19 PM
8/2/2013 3:12:19 PM
8/2/2013 3:12:19 PM
8/2/2013 3:12:19 PM8/2/2013 3:12:19 PM
3
12V
Model External Fuse
(sold separately)
Power/Ground Wire KICKER Wiring Kit
DXA250.1 1 x 40 Ampere 8 Gauge PK8, ZCK84
DXA500.1 1 x 80 Ampere 4 Gauge PK4, CK44, ZCK44
DXA1000.1 1 x 150 Ampere 4 Gauge PKD1, PWB050
DXA1500.1 1 x 150 Ampere 4 Gauge PKD1, PWB050
battery
external fuse
remote turn-on
(see page 5)
bare-metal
chassis ground
≤18”
(45cm)
≤24”
(60cm)
Install a fuse within 18” (45cm) of the battery and in-line with the power cable connected to your amplifi er. If you
ever need to remove the amplifi er from the vehicle after it has been installed, the ground wire should be the last
wire disconnected from the amplifi er--just the opposite as when you installed it.
woofer
MONO OPERATION
minimum impedance of 2 ohms
source unit
high-level speaker
outputs
to amplifi er
shield
+
–
core conductor KICKER KISL (optional)
from source unit high-
level speaker outputs
OR
to amplifi er
2014 DXA Mono Amps Rev B.indd 3
2014 DXA Mono Amps Rev B.indd 3
2014 DXA Mono Amps Rev B.indd 3
2014 DXA Mono Amps Rev B.indd 32014 DXA Mono Amps Rev B.indd 3 8/2/2013 3:12:19 PM
8/2/2013 3:12:19 PM
8/2/2013 3:12:19 PM
8/2/2013 3:12:19 PM8/2/2013 3:12:19 PM

Produktspezifikationen

Marke: Kicker
Kategorie: Empfänger
Modell: DXA250.1

Brauchst du Hilfe?

Wenn Sie Hilfe mit Kicker DXA250.1 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten


Bedienungsanleitung Empfänger Kicker

Kicker

Kicker KMA600.4 Bedienungsanleitung

11 September 2024
Kicker

Kicker KXMA1500.1 Bedienungsanleitung

4 September 2024
Kicker

Kicker KXA800.5 Bedienungsanleitung

4 September 2024
Kicker

Kicker PXA200.2 Bedienungsanleitung

4 September 2024
Kicker

Kicker PXA500.1 Bedienungsanleitung

4 September 2024
Kicker

Kicker KXA400.4 Bedienungsanleitung

4 September 2024
Kicker

Kicker KXA1200.1 Bedienungsanleitung

4 September 2024
Kicker

Kicker IQ500.4 Bedienungsanleitung

4 September 2024
Kicker

Kicker KXA800.1 Bedienungsanleitung

4 September 2024
Kicker

Kicker KXA1600.1 Bedienungsanleitung

4 September 2024

Bedienungsanleitung Empfänger

Neueste Bedienungsanleitung für -Kategorien-

Rotel

Rotel RA‑1592MKII Bedienungsanleitung

16 Oktober 2024
Denon

Denon AVR-S900W Bedienungsanleitung

16 Oktober 2024
Pro-Ject

Pro-Ject Amp Box DS2 Bedienungsanleitung

15 Oktober 2024
AKG

AKG HP12U Bedienungsanleitung

15 Oktober 2024
Sennheiser

Sennheiser EM 9046 SU Bedienungsanleitung

14 Oktober 2024
Yamaha

Yamaha MusicCast RX-V481 Bedienungsanleitung

14 Oktober 2024
JL Audio

JL Audio VX600/6i Bedienungsanleitung

12 Oktober 2024
Pioneer

Pioneer SX-303RDS Bedienungsanleitung

10 Oktober 2024
Technics

Technics SA-160L Bedienungsanleitung

8 Oktober 2024
Avantree

Avantree Audiplex Bedienungsanleitung

7 Oktober 2024