Kicker CompVR CVR12 Bedienungsanleitung
Lesen Sie kostenlos die đź“– deutsche Bedienungsanleitung fĂĽr Kicker CompVR CVR12 (4 Seiten) in der Kategorie Subwoofer. Dieser Bedienungsanleitung war fĂĽr 61 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet
Seite 1/4
CVR
COMP SUBWOOFERVR
CVR , CVR , CVR , CVR15 12 10 8
2007 Stillwater Designs
CVR8
2 or 4
44.3
400 (200)
83.1
.408 (10.37)
7.56
9.36
.912
.831
.495 (14.01)
41.1 (674)
8 1/2 (21.5)
7 1/16 (17.9)
4 5/16 (11)
WiringOptions
CompVR subwoofers are available with dual 2Ω
(ohm) or dual 4Ωvoice coils. Both coils must be
connected to a source of amplification. The dual
2Ωwoofer will generate a 1Ωload if the coils are
wired in parallel or a 4Ωload in series. The dual
4Ωwoofer will provide a 2Ωload wired in parallel
or 8Ωload wired in series. The terminals with the
white dots are for the first voice coil. The terminals
with solid-red and solid-black markings are for the
second voice coil. See Figures 1 and 2.
PERFORMANCE
Congratulations on your
KICKER purchase
Please record your purchase
information and keep your sales
receipt for validation of warranty.
Note: All specifications and performance figures are subject to change.
Measurements based on 4 ohm voice coil models.
Please visit the www.kicker.com for the most current information.
2
INSTALLATION
COMPVRSUBWOOFER
Owner’sManual
CVR CVR CVR CVR15 /12 /10 /8
Models:
COMPVRSUBWOOFER 3
Authorized Kicker Dealer:
Purchase Date:
Subwoofer Model Number:
Subwoofer Serial Number:
_________________________
_________________________
_________________________
_________________________
SealedEnclosureApplications
The CompVR generates more sound pressure than competing subwoofers on the market and excels
when used in the recommended sealed boxes. These sealed enclosure designs give the smoothest
response with increased energy at the lowest frequencies, 20 to 30Hz. These designs deliver massive
amounts of highly-accurate bass and can be driven with punishing levels of amplifier power.
The CompVR high performance suspension system can operate in a larger sealed enclosure. This
maximum enclosure volume application is ideal for SQ (ultra sound quality) installations. The SQ
enclosure generates a very flat response curve and superbly extends the subbass response.
CompVR subwoofers perform well in any size sealed enclosure between the Compact and SQ volume
recommendations. These systems will exhibit benefits of both designs: Compact produces high-impact
bass, and SQ generates low bass frequency protraction. Overall, the system will sound more like the
recommended enclosure design it is closest to in enclosure volume. These enclosure recommendations
have been calculated with the airspace inside the enclosure and include the displacement of the woofer.
All sealed-enclosure airspace should be filled to 50% loose poly-fil (polyester fiberfill) stuffing. Do not
make the airspace greater than the SQ, maximum enclosure volume, recommendation.
Model:
CVR8
CVR10
CVR12
CVR15
Sealed Maximum VolumeSQ (Enclosure )
1.8 ft3(51L) Power Handling = 140W RMS
3 ft3(85L) Power Handling = 300W RMS
4.6 ft3(130L) Power Handling = 300W RMS
5.2 ft3(147L) Power Handling = 500W RMS
Sealed Minimum VolumeCompact (Enclosure )
.4 ft3(11.3L) Power Handling = 200W RMS
.8 ft3(22.7L) Power Handling = 400W RMS
1 ft 3(28.3L) Power Handling = 400W RMS
1.8 ft 3(51L) Power Handling = 500W RMS
Model:
CVR8
CVR10
CVR12
CVR15
Panel B, in (cm)
11x8.125 (27.9x20.6)
13.5x10.125 (34.3x25.7)
14.5x11 (36.8x27.9)
17.25x13.5 (43.8x34.3)
Panel A, in (cm)
11x11 (27.9x27.9)
13.5x13.5 (34.3x34.3)
14.5x14.5 (36.8x36.8)
17.25x17.25 (43.8x43.8)
Volume, ft3(L)
.4 (11.3)
.8 (22.7)
1 (28.3)
1.8 (51)
Panel C, in (cm)
9.5x8.125 (24.1x20.6)
12x10.125 (30.5x25.7)
13x11 (33x27.9)
15.75x13.5 (40x34.3)
P m o u h uanel Di ensi ns forCompact Enclosures Sealed sing 3/4” (1.9cm) t ick MDF: (See Fig re 3)
Model:
Nominal Impedance [Zn], ohm [per coil]
Resonance Frequency [fs], Hz
Power Handling Watts, Peak (RMS)
Sensitivity [SPLo], dB @ 1W, 1m
Effective Excursion [EXmax™], in (mm)
DC Resistance [Re], ohm [coils in series]
Mechanical Q-Factor [Qms]
Electrical Q-Factor [Qes]
Total Q-Factor [Qts]
Equivalent Volume [Vas], ft
3(L)
Net Displacement, in
3(cc)
Outer Frame Diameter, in (cm)
Hole Cut-Out Diameter, in (cm)
Mounting Depth, in (cm)
CVR15
2 or 4
20.8
1000 (500)
89.1
.492 (12.5)
6.84
10.81
.442
.425
9.23 (261.45)
243.6 (3992)
15 3/8 (39)
13 7/8 (35.2)
8 1/8 (20.6)
CVR12
2 or 4
26.1
800 (400)
86.7
.498 (12.64)
6.99
9.99
.556
.527
3.37 (95.37)
122.1 (2001)
12 1/2 (31.7)
11 1/8 (28.3)
6 5/16 (16.1)
CVR10
2 or 4
33.2
800 (400)
85.5
.501 (12.73)
6.71
8.93
.640
.597
1.42 (40.24)
75.3 (1234)
10 5/8 (27)
9 1/4 (23.5)
5 9/16 (14.1)
Performance
The Kicker CompVR subwoofers were specially designed for “Livin’ Loud” out in the harsh automotive
environment. CompVR subwoofers are versatile and surpass the competition in a sealed or vented box.
They are made of advanced materials and construction techniques to maintain optimal performance for
years to come.
Please allow two weeks of break-in time for the subwoofer to reach optimum performance. To get the best performance
from your new Kicker subwoofers, we recommend using genuine Kicker Accessories and Wiring.
ParallelWiring
Dual 2 Voice Coils = 1Ω Ω Load
Dual 4 Voice Coils = 2Ω Ω Load
F uig re 1
Coil 1 +
Coil 2+
Coil 2 -
Coil 1 -
Amplifier -
Speaker
Connection
Amplifier +
Speaker
Connection
F uig re 3
A
B
C
SeriesWiring
Dual 2 Voice Coils = 4Ω Ω Load
Dual 4 Voice Coils = 8Ω Ω Load
F u ig re 2
Coil 1 +
Coil 2+
Coil 2 -
Coil 1 -
Amplifier -
Speaker
Connection
Amplifier +
Speaker
Connection
CompVR Subwoofer - Covered by one or more of the following patents:
U.S. Pat #'s 6,611,604, 6,731,773 D473,216, D456,386, D449,293,
D355,193, Taiwan Pat. #162,154; Other U.S. and foreign patents pending.
4 5
INSTALLATION
COMPVRSUBWOOFER
INSTALLATION
Pro Tip: You are one ZX
Mono-Amplifier and a few
cables away from a slamm’in
system! The Kicker ZX line of
mono-amplifiers make it easy
to upgrade to rock-solid bass
with your existing or stock
source unit. Please ask your
dealer about the Kicker ZX
Amplifier upgrades.
Vented ApplicationsEnclosure
Ported CompVRs? Absolutely...and with a vengeance! These enclosures incorporate massive slot-
loaded (rectangular) ports with ultra low air velocity for ground pounding street bass that will make your
“skin bounce on your bones!”
These boxes are the enclosure of choice for outrageous street bass and high performance SPL
contests. If space is not a problem and you want to get the most from your CompVR, try one of these
ported designs. You will not be disappointed.
The ported Compact design increases bass efficiency and fits in many space-limited applications.
Although it is the smallest recommended ported enclosure, the output from 30 to 80 Hz will be
considerably higher than that of any sealed box. The SPL / Deep Bass ported design has even more
output in this crucial frequency band.
The SPL / Deep Bass is the largest and most efficient enclosure design. The SPL / Deep Bass delivers
the sonic output needed to win SPL contests and it produces bass notes “all the way down to the
cella”. This design turns heads and jump starts your heart.
Model:
CVR8
CVR10
CVR12
CVR15
Vented Deep Maximum VolumeSPL/Bass (Enclosure )
1.2 ft3(34L) + port displacement
2 x 8” (5.1x20.3cm) port, 19.125” (48.6cm) long
Power Handling = 75W RMS
1.75 ft 3(49.6L) + port displacement
2.5 x 10.5” (6.4x26.7cm) port, 20” (50.8cm) long
Power Handling = 300W RMS
2.25 ft 3(63.7L) + port displacement
3 x 12.5” (7.6x31.8cm) port, 20.5” (52.1cm) long
Power Handling = 300W RMS
5 ft3(142L) + port displacement
3 x 15.5” (7.6x39.4cm) port, 22” (55.9cm) long
Power Handling = 500W RMS
Vented Minimum VolumeCompact (Enclosure )
.8ft3(22.7L) + port displacement
1.5 x 8” (3.8x20.3cm) port, 20.75” (52.7cm) long
Power Handling = 75W RMS
1.25 ft3(35.4L) + port displacement
2 x 10.5” (5.1x26.7cm) port, 20” (50.8cm) long
Power Handling = 300W RMS
1.75 ft3(49.6L) + port displacement
2.5 x 12.5” (6.4x31.8cm) port, 20” (50.8cm) long
Power Handling = 300W RMS
3.0 ft3(85.0L) + port displacement
2.75 x 15.5” (7x39.4cm) port, 25.75” (65.4cm) long
Power Handling = 500W RMS
Box NotesBuilding
Use 3/4” (1.9cm) or thicker MDF (medium density fiberboard) and seal the joints with silicone. Use the
“template” inside your CompVR’s shipping carton to mark the mounting hole, then cut directly on the
line. These designs need internal bracing. Add triangular bracing between each of the larger
unsupported panels. See Figure 4.
All the cubic feet (L) measurements in this manual include the displacement of the woofer. For the
vented enclosures the displacement of the port must be calculated and added to the internal volume of
the final design. Use the outer dimensions of the port and multiply “X x Y x Z”, convert to cubic feet, for
example the CVR12 vented compact design’s external port dimensions are, using 3/4” (1.9cm) MDF:
[ (12.5” + 1.5” total MDF wall thickness) x (2.5” + 1.5” total MDF wall thickness) x 20”] x (1 ft
3/ 1728
in3) = .65 ft3, and add this number to the internal volume of the enclosure, CVR12’s 1.75 ft3+ .65 ft3=
2.4 ft3. See Figure 5. Due to the necessary length of these ports, you may want to fold the port along
the bottom and back walls. It will be impractical to use round ports for these designs.
Do not install a port opening against a solid surface, such as an internal brace, back-panel or trunk wall,
seat or interior panel of your vehicle. The port opening must remain unobstructed. Use the smallest
dimension of the rectangular port as the minimum amount of space between the port opening and any
solid surface to insure unrestricted airflow.
Y
X
Z
A Note on P CowerHandling apacity
CompVR subwoofers will handle massive amounts of power in any of the recommended enclosures,
minimum or maximum. The smaller enclosures are best for use in limited-space applications.
The larger recommended enclosures will yield slightly more bass at the lowest frequencies.
The listed Power Handling capacities assume that both voice coils are in use.
Always connect both coils in a dual voice-coil speaker.
If you prefer an ultra-smooth bass response, you should loosely fill your CompVR enclosure with
poly-fil stuffing. Ported designs will require covering the end of the port (located inside the box) with grill
cloth, chicken wire, or expanded metal to prevent the poly-fil from exiting the port. The use of poly-fil
will slightly decrease efficiency, but will deepen and extend the low frequency output.
For more advice on box building, refer to your Authorized Kicker Dealer, or click on the tab onSupport
the Kicker homepage, www.kicker.com. Choose the Technical Manuals link and then download or view
the corresponding information. Please E-mail or call Technical Services support@kicker.com
(405) 624-8583 for specific or unanswered questions.
Note: The use of a subsonic filter will significantly increase the power handling.
The power handling specifications in these charts are calculated using a 25Hz, 24dB per octave subsonic filter.
F uig re 5
D r 2 = 3 x 3 fo CVR15, CVR1
D 2 2 r 0 = x fo CVR1 , CVR8
D
D
D
F uig re 4
The displac me ent of t eh port must be a e t t e l e t e cal late ancu d d dd d o h internal vo um of h final esign d .
The dimensions for X , Y, and Z may v y b d oar ase n t e t i h h ckness of t eh m uaterial se rtd to ma e t ek h po .
Produktspezifikationen
| Marke: | Kicker |
| Kategorie: | Subwoofer |
| Modell: | CompVR CVR12 |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Kicker CompVR CVR12 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Subwoofer Kicker
24 September 2024
24 September 2024
24 September 2024
24 September 2024
19 September 2024
13 September 2024
11 September 2024
4 September 2024
4 September 2024
4 September 2024
Bedienungsanleitung Subwoofer
- Subwoofer Philips
- Subwoofer Sony
- Subwoofer Bosch
- Subwoofer Yamaha
- Subwoofer Neumann
- Subwoofer König
- Subwoofer MarQuant
- Subwoofer Blaupunkt
- Subwoofer Kenwood
- Subwoofer Sharp
- Subwoofer Atlantic
- Subwoofer Pyle
- Subwoofer Auna
- Subwoofer Bose
- Subwoofer Bowers And Wilkins
- Subwoofer Caliber
- Subwoofer Denon
- Subwoofer Pioneer
- Subwoofer JBL
- Subwoofer JVC
- Subwoofer KEF
- Subwoofer Klipsch
- Subwoofer KrĂĽger And Matz
- Subwoofer Onkyo
- Subwoofer Technics
- Subwoofer Teufel
- Subwoofer Hifonics
- Subwoofer Orion
- Subwoofer TCL
- Subwoofer Sencor
- Subwoofer Fenton
- Subwoofer TOA
- Subwoofer Musway
- Subwoofer Adam
- Subwoofer Audio Pro
- Subwoofer Boston Acoustics
- Subwoofer Cabasse
- Subwoofer Canton
- Subwoofer Dali
- Subwoofer Gemini
- Subwoofer Harman Kardon
- Subwoofer Heco
- Subwoofer Magnat
- Subwoofer Mirage
- Subwoofer Power Dynamics
- Subwoofer Skytec
- Subwoofer Tangent
- Subwoofer Vonyx
- Subwoofer Peavey
- Subwoofer HK Audio
- Subwoofer Nova
- Subwoofer Alpine
- Subwoofer Renegade
- Subwoofer LTC
- Subwoofer Behringer
- Subwoofer Mackie
- Subwoofer Omnitronic
- Subwoofer ESI
- Subwoofer MB Quart
- Subwoofer Marantz
- Subwoofer Monoprice
- Subwoofer Arcam
- Subwoofer Cambridge
- Subwoofer Dynacord
- Subwoofer Ecler
- Subwoofer Monacor
- Subwoofer Rockford Fosgate
- Subwoofer Crunch
- Subwoofer Massive
- Subwoofer James
- Subwoofer Jamo
- Subwoofer AXTON
- Subwoofer Clarion
- Subwoofer Mac Audio
- Subwoofer ESX
- Subwoofer AVID
- Subwoofer Nubert
- Subwoofer Insignia
- Subwoofer Audison
- Subwoofer RCF
- Subwoofer Electro-Voice
- Subwoofer Sonos
- Subwoofer Yorkville
- Subwoofer Boss
- Subwoofer Alto
- Subwoofer Genelec
- Subwoofer Tivoli Audio
- Subwoofer Hertz
- Subwoofer Pro-Ject
- Subwoofer AV:link
- Subwoofer Polk
- Subwoofer Speed-Link
- Subwoofer Sonus Faber
- Subwoofer McIntosh
- Subwoofer Sonance
- Subwoofer Jensen
- Subwoofer ELAC
- Subwoofer Fostex
- Subwoofer JL Audio
- Subwoofer PreSonus
- Subwoofer Qtx
- Subwoofer Deaf Bonce
- Subwoofer LD Systems
- Subwoofer Bluesound
- Subwoofer DAP Audio
- Subwoofer Definitive Technology
- Subwoofer Energy
- Subwoofer Focal
- Subwoofer Fusion
- Subwoofer Ground Zero
- Subwoofer Helix
- Subwoofer Infinity
- Subwoofer Lanzar
- Subwoofer Martin
- Subwoofer Mission
- Subwoofer Monitor Audio
- Subwoofer Mordaunt Short
- Subwoofer Mtx Audio
- Subwoofer Paradigm
- Subwoofer Phoenix Gold
- Subwoofer Piega
- Subwoofer Q Acoustics
- Subwoofer Quadral
- Subwoofer REL Acoustics
- Subwoofer Soundstream
- Subwoofer Stinger
- Subwoofer Tannoy
- Subwoofer Velodyne
- Subwoofer Wharfedale
- Subwoofer AudioControl
- Subwoofer Martin Audio
- Subwoofer APart
- Subwoofer QSC
- Subwoofer RetroSound
- Subwoofer Proel
- Subwoofer Martin Logan
- Subwoofer Metra
- Subwoofer Kanto
- Subwoofer Fluance
- Subwoofer IMG Stage Line
- Subwoofer Atlas Sound
- Subwoofer FBT
- Subwoofer Eikon
- Subwoofer DB Technologies
- Subwoofer Argon
- Subwoofer Morel
- Subwoofer SVS
- Subwoofer Citronic
- Subwoofer SPL
- Subwoofer Wet Sounds
- Subwoofer Pyramid
- Subwoofer Black Hydra
- Subwoofer GoldenEar Technology
- Subwoofer Roswell
- Subwoofer Audac
- Subwoofer OSD Audio
- Subwoofer Indiana Line
- Subwoofer Match
- Subwoofer Audioengine
- Subwoofer On-Q
- Subwoofer Crestron
- Subwoofer PSSO
- Subwoofer PowerBass
- Subwoofer Dynaudio
- Subwoofer PSB
- Subwoofer KLH Audio
- Subwoofer Extron
- Subwoofer Bazooka
- Subwoofer Theater Solutions
- Subwoofer SSV Works
- Subwoofer Kali Audio
- Subwoofer MadBoy
- Subwoofer Revel
- Subwoofer Nxg
- Subwoofer ANT
- Subwoofer KRK
- Subwoofer Cerwin-Vega
- Subwoofer Sound Ordnance
- Subwoofer Memphis Audio
- Subwoofer Andover
- Subwoofer Aquatic AV
- Subwoofer PrecisionPower
- Subwoofer Totem
- Subwoofer Poly-Planar
- Subwoofer Audiofrog
- Subwoofer Triangle
- Subwoofer Raveland
- Subwoofer Proficient
- Subwoofer Eve Audio
- Subwoofer Planet Audio
- Subwoofer Wavemaster
- Subwoofer Audiotec Fischer
- Subwoofer Origin Acoustics
- Subwoofer PMC
- Subwoofer BMB
- Subwoofer Amina
- Subwoofer Bowers Wilkins
- Subwoofer Chrysalis
- Subwoofer B&W
- Subwoofer Alphasonik
- Subwoofer Glemm
Neueste Bedienungsanleitung fĂĽr -Kategorien-
13 Oktober 2024
13 Oktober 2024
10 Oktober 2024
7 Oktober 2024
6 Oktober 2024
6 Oktober 2024
6 Oktober 2024
4 Oktober 2024
2 Oktober 2024
30 September 2024