Kicker CompVR CVR10 Bedienungsanleitung

Kicker Subwoofer CompVR CVR10

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Kicker CompVR CVR10 (11 Seiten) in der Kategorie Subwoofer. Dieser Bedienungsanleitung war für 18 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF
Seite 1/11
COMPVR SUBWOOFER
COMPVR8
COMPVR10
COMPVR12
COMPVR15
English Version
Versión Español
Altavoz Para Sonidos Graves
Deutsche Version
Tieftöner
Version Francaise
Haut-parleur d’Extrêmes Graves
LIVIN’ LOUD
2010 CompVR f01.indd 1
2010 CompVR f01.indd 1
2010 CompVR f01.indd 1
2010 CompVR f01.indd 12010 CompVR f01.indd 1 9/9/2009 3:49:37 PM
9/9/2009 3:49:37 PM
9/9/2009 3:49:37 PM
9/9/2009 3:49:37 PM9/9/2009 3:49:37 PM
2COMPVR SUBWOOFER 3
The Kicker CompVR subwoofers were specially designed for “Livin’ Loud” out in the harsh automotive
environment. CompVR subwoofers are extremely versatile and surpass the competition in a sealed or
vented box. They are made of advanced materials and construction techniques to maintain optimal
performance for years to come.
SPECIFICATIONS
WIRING
CompVR subwoofers are available with dual 2 (ohm) or dual 4 voice coils. Both coils must be  
connected to a source of amplifi cation. The dual 2 woofer will generate a 1 load if the coils are wired  
in parallel or a 4 load in series. The dual 4 woofer will provide a 2 load wired in parallel or 8 load  
wired in series. The terminals with the white dots are for the fi rst voice coil. The terminals with solid-red
and solid-black markings are for the second voice coil. See Figure 1.
SEALED ENCLOSURE APPLICATIONS
The CompVR generates more sound pressure than competing subwoofers on the market and excels
when used in the recommended sealed boxes. These sealed enclosure designs give the smoothest
response with increased energy at the lowest frequencies, 20 to 30Hz. These designs deliver massive
amounts of highly-accurate bass and can be driven with punishing levels of amplifi er power.
The CompVR high performance suspension system can operate in a larger sealed enclosure. This
maximum enclosure volume application is ideal for SQ (ultra sound quality) installations. The SQ enclosure
generates a very fl at response curve and superbly extends the subbass response.
CompVR woofers perform well in any size
sealed enclosure between the Compact
and SQ volume recommendations. These
systems will exhibit benefi ts of both designs:
Compact produces high-impact bass,
and SQ generates low bass frequency
protraction. Overall, the system will sound
more like the recommended enclosure
design it is closest to in enclosure volume.
These enclosure recommendations have
been calculated with the airspace inside the
enclosure and include the displacement of
the woofer. All sealed-enclosure airspace
should be fi lled to 50% loose poly-fi l
(polyester fi berfi ll) stuffi ng.
CompVR Subwoofer Owner’s Manual
Authorized KICKER Dealer:
Purchase Date:
Speaker Model Number:
Speaker Serial Number:
Model CompVR CompVR8 10 CompVR CompVR12 15
Nominal Impedance [Zn], ohm 2 or 4 2 or 4 2 or 4 2 or 4
Resonance Frequency [fs], Hz 52.7 43.8 32.6 24.6
Power Handling Watts, Peak (RMS) 400 (200) 800 (400) 800 (400) 1000 (500)
Sensitivity [SPLo], dB @ 1W, 1m 82.8 83.6 86.9 89.2
Effective Excursion [EXmax™], in (mm) .408 (10.37) .501 (12.73) .501 (12.73) .492 (12.5)
DC Resistance [Re], ohm 4.1 3.7 3.5 3.7
Mechanical Q-Factor [Qms] 9.577 10.03 8.166 9.138
Electrical Q-Factor [Qes] .937 .914 .703 .398
Total Q-Factor [Qts] .853 .838 .648 .381
Equivalent Volume [Vas], ft³ (L) .279 (7.925) .570 (16.159) 2.3 (65.294) 5 (143.82)
Net Displacement, in³ (cc) 33.9 (555.5) 60.4 (989.8) 75.9 (1243.8) 176.6 (2893.9)
Outer Frame Diameter, in (cm) 8-1/2 (21.6) 10-11/16 (27.1) 12-5/8 (32) 15-1/2 (39.3)
Hole Cut-Out Diameter, in (cm) 6-15/16 (17.6) 9-3/16 (23.3) 11 (27.8) 13-11/16 (34.7)
Mounting Depth, in (cm) 4-1/4 (10.8) 5-1/2 (14) 6-1/4 (15.9) 8-3/16 (20.7)
Model Volume ft3 (L) Panel A in. (cm) Panel B in. (cm) Panel C in. (cm)
CompVR8 .4 (11.3) 11X11 (27.9X27.9) 11X8.125 (27.9X20.6) 9.5X8.125 (24.1X20.6)
CompVR10 .8 (22.7) 13.5X13.5 (34.3X34.3) 13.5X10.125 (34.3X25.7) 12X10.125 (30.5X25.7)
CompVR12 1 (28.32) 14.5X14.5 (36.8X36.8) 14.5X11 (36.8X27.9) 13X11 (33X27.9)
CompVR15 1.8 (51) 17.25X17.25 (43.8X43.8) 17.25X13.5 (43.8X34.3) 15.75X13.5 (40X34.3)
Model Volume ft3 (L) Power Handling
CompVR8 .4 (11.3) 200W RMS
CompVR10 .8 (22.7) 400W RMS
CompVR12 1 (28.3) 400W RMS
CompVR15 1.8 (51) 500W RMS
Model Volume ft3 (L) Power Handling
CompVR8 1.8 (51) 140W RMS
CompVR10 3 (85) 300W RMS
CompVR12 4.6 (130) 300W RMS
CompVR15 5.2 (147) 500W RMS
CompVR CompVR CompVR CompVR8 / 10 / 12 / 15
Models:
Panel Dimensions for Compact Sealed Enclosures using 3/4” (1.9cm) thick MDF (See Figure 2)
Sealed Compact Sealed SQ
Note: All specifi cations and performance fi gures are subject to change. Please visit www.kicker.com for the most
current information. To get the best performance from your new KICKER Subwoofer, we recommend using genuine
KICKER Accessories and Wiring. Please allow two weeks of break-in time for the subwoofer to reach optimum
performance.
Figure 2
Figure 1 Series WiringParallel Wiring
Dual 2 Voice Coils = 4 Load 
Dual 4 Voice Coils = 8 Load 
Dual 2 Voice Coils = 1 Load 
Dual 4 Voice Coils = 2 Load 
Coil 1+Coil 1+
Coil 2+Coil 2+
Coil 2-Coil 2-
Coil 1-Coil 1-
2010 CompVR f01.indd 2-3
2010 CompVR f01.indd 2-3
2010 CompVR f01.indd 2-3
2010 CompVR f01.indd 2-32010 CompVR f01.indd 2-3 9/9/2009 3:49:40 PM
9/9/2009 3:49:40 PM
9/9/2009 3:49:40 PM
9/9/2009 3:49:40 PM9/9/2009 3:49:40 PM
4COMPVR SUBWOOFER 5
Y
X
Z
For more advice on box building, refer to your Authorized
Kicker Dealer, or click on the Support tab on the Kicker
homepage, www.kicker.com. Please e-mail support@
kicker.com or call Technical Support at (405) 624-8583
for specifi c or unanswered questions.
CompVR Subwoofer - Covered by one or more of the following patents:
U.S. Pat #’s 6,611,604, 6,731,773 D473,216, D456,386, D449,293, D355,193,
Taiwan Pat. #162,154; Other U.S. and foreign patents pending.
VENTED ENCLOSURE APPLICATIONS
These boxes are the enclosure of choice for outrageous street bass and high performance SPL contests.
If space is not a problem and you want to get the most from your CompVR, try one of these ported
designs. You will not be disappointed. CompVR subwoofers will handle massive amounts of power in
any of the recommended enclosures, minimum or maximum. The smaller enclosures are best for use in
limited-space applications. The larger recommended enclosures will yield slightly more bass at the lowest
frequencies.
The ported Compact design increases bass effi ciency and fi ts in many space-limited applications.
Although it is the smallest recommended ported enclosure, the output from 30 to 80 Hz will be
considerably higher than that of any sealed box. The SPL / Deep Bass ported design has even more
output in this crucial frequency band. The SPL / Deep Bass is the largest and most effi cient enclosure
design.
BOX BUILDING NOTES
Use 3/4” (1.9cm) or thicker MDF (medium density fi berboard) and seal the joints with silicone. Use the
“template” inside your CompVR’s shipping carton to mark the mounting hole, then cut directly on the line.
These designs need internal bracing. Add triangular bracing between each of the larger unsupported
panels. See Figure 3.
All the cubic feet (L) measurements in this manual include the displacement of the woofer. For the vented
enclosures the displacement of the port must be calculated and added to the internal volume of the fi nal
design. Use the outer dimensions of the port and multiply “X x Y x Z”, convert to cubic feet, for example
the CompVR12 vented Compact design’s external port dimensions are, using 3/4” (1.9cm) MDF: [ (12.5”
+ 1.5” total MDF wall thickness) x (2.5” + 1.5” total MDF wall thickness) x 20”] x (1 ft
3 / 1728 in3 ) = .65 ft3,
and add this number to the internal volume of the enclosure, CompVR12’s 1.75 ft
3 + .65 ft3 = 2.4 ft3. See
Figure 4. Due to the necessary length of these ports, you may want to fold the port along the bottom and
back walls. It will be impractical to use round ports for these designs.
Do not install a port opening against a solid surface, such as an internal brace, back-panel or trunk wall,
seat or interior panel of your vehicle. The port opening must remain unobstructed. Use the smallest
dimension of the rectangular port as the minimum amount of space between the port opening and any
solid surface to insure unrestricted airfl ow.
If you prefer an ultra-smooth bass response, you should loosely fi ll your CompVR enclosure with poly-fi l
stuffi ng. Ported designs will require covering the end of the port (located inside the box) with grill cloth,
chicken wire, or expanded metal to prevent the poly-fi l from exiting the port. The use of poly-fi l will slightly
decrease effi ciency, but will deepen and extend the low frequency output.
D
D
D
Figure 3
Figure 4
D = 3” x 3” for CVR15, CVR12
D = 2” x 2” for CVR10, CVR8
stillwaterdesigns
P.O. Box 459 • Stillwater, Oklahoma 74076 • USA • (405) 624–8510 20090909-F-2010CompVR
Vented Compact CompVR CompVR8 10 CompVR CompVR12 15
Box Volume, ft³ (L) + port displacement .8 (22.7) 1.25 (35.4) 1.75 (49.6) 3 (85)
Port Opening Size, in x in (cm x cm) 1.5X8 (3.8X20.3) 2X10.5 (5.1X26.7) 2.5X12.5 (6.4X31.8) 2.75X15.5 (7X39.4)
Port Length, in (cm) 20.75 (52) 20 (50.8) 20 (50.8) 25.75 (65.4)
Power Handling, RMS 75 300 300 500
Vented SQ CompVR CompVR8 10 CompVR CompVR12 15
Box Volume, ft³ (L) + port displacement 1.2 (34) 1.75 (49.6) 2.25 (63.7) 5 (142)
Port Opening Size, in x in (cm x cm) 2X8 (5.1X20.3) 2.5X10.5 (6.4X26.7) 3X12.5 (7.6X31.8) 3X15.5 (7.6X39.4)
Port Length, in (cm) 19.125 (48.6) 20 (50.8) 20.5 (52.1) 22 (55.9)
Power Handling, RMS 75 300 300 500
Sound Check: Poor bass response?
Check the system phasing by reversing
the positive and negative speaker
connections on the subwoofer. If the
bass improves, then the subwoofer was
out of phase in reference to the rest of
the audio system.
2010 CompVR f01.indd 4-5
2010 CompVR f01.indd 4-5
2010 CompVR f01.indd 4-5
2010 CompVR f01.indd 4-52010 CompVR f01.indd 4-5 9/9/2009 3:49:40 PM
9/9/2009 3:49:40 PM
9/9/2009 3:49:40 PM
9/9/2009 3:49:40 PM9/9/2009 3:49:40 PM

Produktspezifikationen

Marke: Kicker
Kategorie: Subwoofer
Modell: CompVR CVR10

Brauchst du Hilfe?

Wenn Sie Hilfe mit Kicker CompVR CVR10 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten


Bedienungsanleitung Subwoofer Kicker

Kicker

Kicker 51CWQ102 Bedienungsanleitung

24 September 2024
Kicker

Kicker 51CWQ122 Bedienungsanleitung

24 September 2024
Kicker

Kicker 43C84 Bedienungsanleitung

24 September 2024
Kicker

Kicker 51CWQ124 Bedienungsanleitung

24 September 2024
Kicker

Kicker KMW102LC Bedienungsanleitung

19 September 2024
Kicker

Kicker L7 Solo-Baric L7S84 Bedienungsanleitung

13 September 2024
Kicker

Kicker CompQ 51CWQ152 Bedienungsanleitung

11 September 2024
Kicker

Kicker CompVT 43CVT122 Bedienungsanleitung

4 September 2024
Kicker

Kicker CompVR 43CVR104 Bedienungsanleitung

4 September 2024
Kicker

Kicker SoloX 49L7X152 Bedienungsanleitung

4 September 2024

Bedienungsanleitung Subwoofer

Neueste Bedienungsanleitung für -Kategorien-

Pioneer

Pioneer S-21W Bedienungsanleitung

13 Oktober 2024
JL Audio

JL Audio SGR-10TW3 Bedienungsanleitung

13 Oktober 2024
Polk

Polk DB1040 Bedienungsanleitung

10 Oktober 2024
Blaupunkt

Blaupunkt GBW801 Bedienungsanleitung

7 Oktober 2024
JL Audio

JL Audio TW1 Bedienungsanleitung

6 Oktober 2024
Jensen

Jensen J12W Bedienungsanleitung

6 Oktober 2024
Musway

Musway MT169Q Bedienungsanleitung

6 Oktober 2024
JL Audio

JL Audio 12W0v3 Bedienungsanleitung

4 Oktober 2024
Yamaha

Yamaha YST-SW315PN Bedienungsanleitung

2 Oktober 2024
JBL

JBL SW10 Bedienungsanleitung

30 September 2024