Keurig K-Slim Bedienungsanleitung


Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Keurig K-Slim (6 Seiten) in der Kategorie Kaffeemaschine. Dieser Bedienungsanleitung war für 5 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/6
Get the most from your
new Keurig® brewer
Use & Care Guide
Slim
Pow ner Butto
Remove pcking tpe from brewer.
Plug into  grounded outlet. Plce
mug on drip try.
Remove the water reservoir lid,
then lift the reservoir straight up
to remove it.
Rinse reservoir with fresh water
and fill to the MAX FILL line.
Replace water reservoir, making
sure the lock tabs engage with the
brewer. Replace lid.
NOTE: Do not use distilled water.
Lift and lower the handle. Do not
insert a K-Cup® pod. The brewer will
power on automatically.
The 3 cup sizes will blink. Press the 8oz
button, then press the blinking brew
button to start a cleansing brew. Pour
the hot water into the sink.
The one-time setup process is now
complete and you are ready to brew!
1
3
5
2
4
6
Before You Brew
Place a mug on the drip tray. If using
a travel mug, remove the drip tray
and place the mug on the drip tray
base. Lift the handle and place a
K-Cup® pod in the K-Cup® pod holder.
Lower the handle completely to close
the lid.
Do not remove the foil lid on the
K-Cup® pod.
The three brew size buttons will blink.
Select your brew size, then press the
blinking brew button brew button. The
will remain illuminated while brewing.
Brewing is complete when the buttons
are no longer illuminated. Lift the
handle and dispose of the K-Cup® pod.
CAUTION: While brewing, there is extremely hot water
in the K-Cup® pod holder. To avoid injury, do not lift the
handle during the brewing process.
  

Brew Button
1
 

Brew Button
Plug & Place Rinse & Fill
Lift & Lower Cleansing Brew
Place Mug & Pod Brew & Enjoy!
Brewer Features
Smart Start heats then brews in one simple process. No need to
wait for the brewer to heat before selecting brew size. Simply
power on your brewer by lifting the handle, insert K-Cu pod, then
select your brew size. Press the brew button. The brewer will heat,
then automatically begin brewing.
Auto Off automatically turns your brewer off
5 minutes after the last brew for energy savings.
High Altitude To ensure your brewer works properly at higher
altitudes (5,000 feet), enable the High Altitude setting by pressing
and holding the brew button and 8oz buttons for 3 seconds.
Brew Your First Cup
Caring For Your Brewer
K-Cup® Pod Holder
To remove the K-Cup® pod holder from
the brewer, lift the handle and grasp
the top of the K-Cup® pod holder
with one hand while pushing up on
the bottom of the K-Cup® pod holder
from underneath with the other until
it releases. After cleaning, align the
K-Cup® pod holder with the opening
using the two front ribs as a guide
and snap into place from the top.
Funnel
Washing the funnel ensures a fresh
beverage experience. The funnel
should be washed regularly and can
be removed from the K-Cup® pod
holder by pulling on it until it pops off.
To replace it, orient the snaps to the
indent and just snap it back onto the
K-Cup® pod holder.
Regular cleaning keeps your brewer running smoothly. Always be sure to turn off and unplug your brewer before cleaning.
The water reservoir should be
cleaned periodically by wiping the
inside of the reservoir and underside
of the lid with a damp, non-abrasive,
lint free cloth. Do not dry the inside
of the water reservoir with a cloth as
lint may remain. Allow the reservoir
to dry completely.
Exit Needle
Remove the pod holder assembly
and detach the funnel. Locate the
exit needle on the inside bottom
of the K-Cup® pod holder. Insert a
straightened paper clip into the exit
needle to loosen any coffee grounds.
Entrance Needle
Lift the brewer handle and locate the entrance needle on the
underside of the lid. To clean both holes in the needle, hold
the brewer handle in the upward position and with your other
hand, carefully insert a straightened paper clip into both
holes. Gently move it around to loosen any coffee grounds.
Lower the handle completely and run two water-only brew
cycles. Do not insert a K-Cup® pod.
TIP: Refer to support.keurig.com for video instructions on cleaning the entrance/exit needles.
Brewer Exterior
Keep your Keurig® brewer looking its
best by cleaning the exterior from
time to time. Just clean with a damp,
soapy, lint-free, non-abrasive cloth.
Never immerse the brewer in water or
other liquids.
Drip Tray
The drip tray can hold up to 8 ounces
of overflow and should be emptied
and cleaned occasionally. To remove,
slide it toward you, keeping it level to
avoid spilling. Rinse and clean with a
damp, soapy, lint-free, non-abrasive
cloth.
Water Reservoir
CAUTION: There are sharp needles that puncture the K-Cup® pod above the K-Cup® pod holder and in the
bottom of the K-Cup® pod holder. To avoid risk of injury, do not put your fingers in the K-Cup® pod holder.
NOTE: Always remove and dispose of the used K-Cup® pod after brewing.


Produktspezifikationen

Marke: Keurig
Kategorie: Kaffeemaschine
Modell: K-Slim

Brauchst du Hilfe?

Wenn Sie Hilfe mit Keurig K-Slim benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Kaffeemaschine Keurig

Bedienungsanleitung Kaffeemaschine

Neueste Bedienungsanleitung für -Kategorien-