Kenwood M-515-S Bedienungsanleitung

Kenwood Hi-Fi-Anlage M-515-S

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Kenwood M-515-S (4 Seiten) in der Kategorie Hi-Fi-Anlage. Dieser Bedienungsanleitung war für 6 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF
Seite 1/4
CAUTION: Proper Ventilation
Do not block the ventilation openings or holes. (If the
ventilation openings or holes are blocked by a newspaper or
cloth, etc., the heat may not be able to get out.)
To avoid risk of electric shock and fire, and to prevent damage,
locate the apparatus as follows:
Front: No obstructions and open spacing.
Sides/Top/Back: No obstructions should be placed in the areas
indicated by the dimensions in the illustration.
Bottom: Place on the level surface. Maintain an adequate air
path for ventilation by placing on a stand with a height of
10 cm or more.
1.
2.
3.
Microsoft and Windows Media are either registered trademarks or trademarks of Microsoft Corporation in the United
States and/or other countries.
iPhone, iPod, iPod classic, iPod nano and iPod touch are trademarks of Apple Inc., registered in the U.S. and other
countries.
“Made for iPod” and “Made for iPhone” mean that an electronic accessory has been designed to connect specifically
to iPod or iPhone, respectively, and has been certified by the developer to meet Apple performance standards. Apple
is not responsible for the operation of this device or its compliance with safety and regulatory standards. Please note
that the use of this accessory with iPod or iPhone may affect wireless performance.
•
•
•
COMPACT Hi-Fi COMPONENT SYSTEM
© 2010 Kenwood Corporation LVT2196-001A [E, X]
M-515
0910YOMMDWDAT
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK). NO USER-
SERVICEABLE PARTS INSIDE. REFER SERVICING TO
QUALIFIED SERVICE PERSONNEL.
THE LIGHTNING FLASH WITH ARROWHEAD
SYMBOL, WITHIN AN EQUILATERAL TRIANGLE,
IS INTENDED TO ALERT THE USER TO THE
PRESENCE OF UNINSULATED "DANGEROUS
VOLTAGE" WITHIN THE PRODUCT’S
ENCLOSURE THAT MAY BE OF SUFFICIENT
MAGNITUDE TO CONSTITUTE A RISK OF
ELECTRIC SHOCK TO PERSONS.
THE EXCLAMATION POINT WITHIN AN
EQUILATERAL TRIANGLE IS INTENDED TO
ALERT THE USER TO THE PRESENCE OF
IMPORTANT OPERATING AND MAINTENANCE
(SERVICING) INSTRUCTIONS IN THE
LITERATURE ACCOMPANYING THE APPLIANCE.
INSTRUCTION MANUAL
Declaration of Conformity with regard
to the EMC Directive 2004/108/EC
Manufacturer:
Kenwood Corporation
2967-3 Ishikawa-machi, Hachioji-shi, Tokyo, 192-8525
Japan
EU Representative's:
Kenwood Electronics Europe BV
Amsterdamseweg 37, 1422 AC UITHOORN,
The Netherlands
Sleep Timer
Specify the time (in minutes).
To check the remaining time until the System shuts off,
press once.SLEEP
Daily Timer
By using Daily Timer, you can wake up with your favorite
music.
Set the clock before using Daily Timer (see “Setting the
clock” in “Initial settings”).
You can store three Daily Timer settings.
Tune into a station, insert a disc, or connect a USB mass
storage class device/iPod to the System beforehand.
1 Select a Daily Timer number.
2
3 Set the timer contents.
Hour and minute for the on-time and off-time
Playback source
For “TUNER FM”: Select a preset number. (To preset
stations, see “Presetting stations” in “FM radio.”)
For “CD” or “USB”: Select a track number. (For MP3/
WMA: Select a group, then a track number.)
Volume
To correct a misentry during the process, press
CANCEL. You can return to the previous step.
•
•
•
•
–
–
•
•
–
•
4 Press TIMER repeatedly to exit from the setting.
5 Turn off the System.
The STANDBY lamp starts flashing.
While on standby, the timer indicator ( ) is not
displayed.
To cancel a Daily Timer
1 Select a Daily Timer number.
2 Cancel the selected Daily Timer.
The timer indicator is turned off.
The timer contents are kept.
3 Press TIMER repeatedly to exit from the setting.
Auto Standby
You can turn off the System automatically.
“A.STBY” and “SET” appear alternately.
The A.STBY indicator starts flashing after playback
stops. If no operation is done for about 3 minutes, the
System is turned off.
This function cannot be used when “TUNER FM” or
“AUDIO IN” is selected as the source.
This function does not work when Sleep Timer is
activated.
This function does not work for iPod mini (1st and 2nd
Generations), iPod photo (4th Generation) or iPod (4th
Generation).
•
•
•
•
•
•
Lithium coin battery
(product number: CR2025)
Sound adjustments
Fade muting
To drop the volume in a moment
To restore the volume, press again or adjust the
volume level.
Sound Turbo
To emphasize the sound
Hyper Bass Sound (HBS)
To reinforce the bass sound
Bass and treble levels
1
2 Adjust the level.
•
Display settings
Display/illumination brightness
You can dim the display window and illumination.
Display information
You can change the information shown on the display.
Ex.: During playback of a CD...
The information shown on the display differs
depending on the source.
•
Compatible iPod models
iPod model Audio Video
iPod nano (5th Generation)
iPod nano (4th Generation)
iPod nano (3rd Generation)
iPod nano (2nd Generation) –
iPod nano (1st Generation) –
iPod touch (3rd Generation)
iPod touch (2nd Generation)
iPod touch (1st Generation)
iPod classic
iPod video (5th Generation)
iPod photo (4th Generation) *
iPod (4th Generation) –
iPod mini (2nd Generation) –
iPod mini (1st Generation) –
iPhone 3GS
iPhone 3G
Only for still picture
If iPod does not play correctly, update iPod software to the
latest version.
*
Canceling the display demonstration
When you plug in and turn on the System, the
display demonstration starts automatically if no
operation is done for about 2 minutes.
To cancel the display demonstration
Setting the clock
1
“CLOCK” and “ADJUST” appear alternately.
2
3 Adjust the hour and minute.
To go back to the previous step, press .CANCEL
The clock is not shown on the display until you
set it.
The clock may gain or lose 1 to 2 minutes per
month. You may need to readjust the clock
periodically.
•
•
•
Supplied accessories
After unpacking, check to make sure that you have all
the following items:
Remote control: RC-F0515E (× 1)
Lithium coin battery CR2025 (× 1)
The battery has been installed in the remote
control when shipped from the factory.
FM antenna (× 1)
If anything is missing, consult your dealer immediately.
•
•
–
•
CAUTION
Store the battery in a place where children cannot reach. If a child accidentally swallows the battery, consult a doctor
immediately.
To prevent the battery from overheating, cracking, or starting a fire:
Do not recharge, short, disassemble or heat the battery or dispose of it in a fire.
Do not leave the battery with other metallic materials.
Wrap the battery with tape and insulate when throwing away or saving it.
Do not poke the battery with tweezers or similar tools.
Dispose of battery in the proper manner, according to federal, state, and local regulations.
The battery (battery pack or battery installed) shall not be exposed to excessive heat source such as sunshine, fire or
the like.
CAUTION for lithium battery
Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type.
•
•
–
–
–
–
•
•
•
Getting started
Red
Black
From left speaker
From right speaker
FM antenna (supplied): Extend it so that you can obtain the best reception.
Maintenance
To get the best performance of the System, keep your discs
and the mechanism clean.
Handling discs
Remove the disc from its case by holding it at the edge
while pressing the center hole lightly.
Do not touch the shiny surface of the disc, or bend the
disc.
Put the disc back in its case after use.
Be careful not to scratch the surface of the disc when
placing it back in its case.
Avoid exposure to direct sunlight, temperature extremes,
and moisture.
To clean the disc:
Wipe the disc with a soft cloth in a straight line from center
to edge.
Cleaning the System
Stains should be wiped off with a soft cloth. If the System
is heavily stained, wipe it with a cloth soaked in water-
diluted neutral detergent and wrung well, then wipe
clean with a dry cloth.
Since the System may deteriorate in quality, become
damaged or get its paint peeled off, be careful about the
following:
DO NOT wipe it hard.
DO NOT wipe it with thinner or benzine.
DO NOT apply any volatile substances such as
insecticides to it.
DO NOT allow any rubber or plastic to remain in contact
for a long time.
•
•
•
•
•
•
•
–
–
–
–
Sound and other adjustments
Connections Do not connect the AC power cord until all other connections have been made.
In this manual...
The remote control buttons are used for explaining the
operations unless mentioned otherwise. However, if the
System has the same or similar button names, they can
also be used for the operations.
“File” and “track” are used interchangeably.
•
•
Specifications
Main unit
General
Power source:
For European models AC 230 V , 50 Hz
For Australian models AC 240 V , 50 Hz
Power consumption at operation: 22 W
Power consumption in standby mode: 1 W or less
Dimensions (W × H × D) [including projecting parts]:
165 mm × 250 mm × 229 mm
Weight (approx.): 2.3 kg
Audio output
Analog sound output:
Speakers × 2
Output power
(IEC 268-3): 20 W + 20 W at 6 Ω (10% THD)
Fitting impedance: 6 Ω – 16 Ω
Audio input
Sound input:
AUDIO IN × 1
NORMAL: 500 mV/47 kΩ
HIGH: 250 mV/47 kΩ
iPod × 1: DC 5 V 500 mA
Video out: Composite
USB
Compatible with USB 2.0 Full-Speed
Compatible device: USB mass storage class device
Compatible file system: FAT16, FAT32
Output power: DC 5 V 500 mA
Tuner
FM tuner:
Receiving frequency: 87.50 MHz to 108.00 MHz
Antenna: 75 Ω - unbalanced type
Speaker
Type: Bass-reflex type
Speaker: Full range: 10 cm
Power handling capacity: 20 W
Impedance: 6 Ω
Dimensions (W × H × D) [including projecting parts]:
140 mm × 250 mm × 135 mm
Weight (approx.) (1 speaker): 1.3 kg
Supplied accessories
See “Supplied accessories” in “Getting started.”
Design and specifications are subject to change without
notice.
•
•
•
•
•
•
•
•
•
•
•
•
•
•Red
(On the main unit)
(Hold)
Main unit
Speaker Speaker
Main unit
Troubleshooting
If you are having a problem with your System, check this list for a possible solution before calling for service.
General
Power does not come on. \ Power plug is not inserted securely. Plug it in securely.
Adjustments or settings are suddenly
canceled before you finish.
\ There is a time limit. Start the procedure again.
Unable to operate the System from the
remote control.
\ The path between the remote control and the remote sensor on the
System is blocked.
\ The battery is exhausted.
No sound is heard. \ Speaker connections are incorrect or loose.
\ Headphones are connected.
\ Set the volume control to proper sound level.
FM radio
Hard to listen to broadcasts because of
noise.
\ Antenna connection is incorrect or loose.
\ The FM antenna is not properly extended and positioned.
\ Electrostatic discharge from your body may cause noise. If this
happens, turn the System off then on again.
iPod
The iPod does not play, but “CONNECT”
appears on the display.
\ The iPod battery is low or exhausted. Charge the iPod battery.
“PLEASE IPOD CHECK” appears on the
display.
\ The iPod is not connected properly.
Disc/USB
The disc/USB mass storage class device
does not play.
\ The disc is placed upside down. Place the disc with the label side
facing up.
\ The disc is recorded using “packet writing (UDF file system).” It cannot
be played.
\ The USB mass storage class device is not connected properly.
“NO FILE” appears on the display. \ MP3/WMA files are not recorded on the disc or USB mass storage class
device.
Groups and tracks are not played back as
you expect.
\ Playing order is determined when the groups and tracks are recorded.
It depends on the writing application.
The disc/USB mass storage class device
sound is discontinuous.
\ The disc is scratched or dirty.
\ MP3/WMA files have not been properly recorded onto the USB mass
storage class device.
Sound from the USB mass storage class
device is interrupted.
\ Noise and static electricity may stop the sound. In this case, disconnect
and connect the USB mass storage class device again after turning off
the System.
The disc tray does not open or close. \ The AC power cord is not plugged in.
\ Disc ejection is prohibited. “LOCKED” appears (see “Prohibiting disc
ejection” in “Disc/USB”).
Timers
Daily Timer does not work. \ The System was turned on when the on-time came. The timer starts
working only when the System is turned off.
\ When you unplug the AC power cord or if a power failure occurs, the
timer will be canceled. You need to set the clock first, then the timer
again. (See “Setting the clock” in “Initial settings” and “Daily Timer” in
“Timers” on the right.)
If the System does not work correctly, disconnect the AC power cord from the wall outlet, wait for a while, then
connect the cord again.
Kenwood corporation bears no responsibility for any loss of data in USB mass storage class device or iPod while using
this System.
•
•
Initial settings
DIMMER 2DIMMER 1
DIM OFF
Current track’s elapsed time Clock
TURBO ON
TURBOOFF
HBS ON
HBS OFF
Timers
CLOCK ADJUSTExit from the setting
TIMER-1 TIMER-2 TIMER-3
Monitor
To view video/picture from the iPod
Playable disc/file types
This System can play back...
Audio CD and CD-R/CD-RW in Audio CD format
MP3/WMA files on a CD-R/CD-RW (ISO 9660 format) or
USB mass storage class device (maximum data transfer
rate: 2 Mbps)
This System cannot play “packet write” discs.
This System can recognize up to 99 groups and 999 tracks
on a disc and USB mass storage class device.
For MP3/WMA playback...
Some MP3/WMA files may not be played back due to
their recording conditions.
Files created with the following functions provided with
Windows Media™ Player 9 or after cannot be played
back:
• WMA Professional
• WMA Lossless
• WMA Voice
This System can play only discs of ISO 9660 Level 1 or
Level 2.
This System can play back MP3/WMA recorded at the
following sampling frequency and bitrate.
MP3 Sampling frequency:
Bitrate:
32/44.1/48 kHz
32 kbps –
320 kbps (VBR*)
WMA Sampling frequency:
Bitrate:
32/44.1/48 kHz
48 kbps –
192 kbps (VBR*)
*Audio files encoded in VBR (Variable Bitrate) may
contain data outside the compatible bitrate of this
system. Such audio files containing incompatible
bitrates cannot be played back.
It is recommended to record each file at a sampling rate
of 44.1 kHz and at a bitrate of 128 kbps.
This System can show the Tag data.
For playback of files on a USB mass storage class device...
You cannot play back files larger than 2 GB.
This System may not play back some USB mass storage
class devices and does not support DRM (Digital Rights
Management).
•
–
–
•
•
•
–
–
–
–
–
–
•
–
–
Composite video
cord (not supplied)
To a wall outlet
Exit from the setting CLOCK ADJUST
TIMER-1 TIMER-2 TIMER-3
BASS
TREB
SLEEP 10 SLEEP 20 SLEEP 30
SLEEP180SLEEPOFF
To composite video input
Prepare the remote control
When you use the remote control for the first time, pull out the insulation sheet.
To replace the battery in the remote control
(Hold) A.STBY SET A.STBY CANCEL
ENGLISH
ENGLISH
ENGLISH
ENGLISHENGLISH
Read Safety instructions and others carefully before
using the System.
CAUTION for outdoor antenna installation
Since antenna installation necessitates skill and experience, always consult
your dealer before installation. The antenna should be placed at a distance
from the power distribution wires. Otherwise, an electric shock accident may
occur if the antenna falls down.
NOTES:
Make sure the antenna conductors do not touch any other terminals, connecting cords or the power cord.
Also, keep the antenna away from metallic parts of the System, connecting cords, and the AC power cord.
Otherwise, it could cause poor reception.
When connecting the speaker cords, match the polarities of the speaker terminals: red to (+) and black to
(–).
DO NOT connect more than one speaker to each terminal.
Use only speakers with the same speaker impedance as indicated by the speaker terminals on the rear of
the System.
DO NOT allow the conductor of the speaker cords to come into contact with the metallic parts of the
System.
The supplied speakers are not magnetically shieled. Keep enough distance between the speakers and a
TV, otherwise the color on the TV screen could be affected.
•
•
•
•
•
•
Do not unplug the AC power cord before turning off the System. Some of the settings you have
made will be lost if you do so.
Front view
Side view
M515_EX_5th.indd 1
M515_EX_5th.indd 1
M515_EX_5th.indd 1
M515_EX_5th.indd 1M515_EX_5th.indd 1 10.8.24 9:51:35 AM
10.8.24 9:51:35 AM
10.8.24 9:51:35 AM
10.8.24 9:51:35 AM10.8.24 9:51:35 AM
1
2
The station search stops when a station of
sufficient signal strength is found.
To manually stop the search, press or .¢ 4
When you press ¢ 4 or repeatedly, the
frequency changes step by step.
When an FM program is broadcast in stereo, the S
(stereo) indicator lights up.
•
•
•
1
2 Start playback of the external device.
Prohibiting disc ejection
You can lock the disc tray.
While the System is on standby...
Improving the reception
To improve the reception
When the monaural mode is activated, the stereo effect
is lost.
•
Presetting stations
You can preset up to 30 FM stations.
While listening to a target station...
1
2 Select a preset number.
3
To erase a preset station
1 Tune in to a preset station (see below).
2
3
Tuning in to a preset station
Receiving FM stations with Radio Data
System
Radio Data System allows FM stations to send an
additional signal along with their regular program
signals.
If you want to know more about Radio Data System,
visit <http://www.rds.org.uk>.
To display the Radio Data System information
Displayed if related signals are not sent by a station.
PS (Program
Service) Commonly known station names.
PTY (Program
Type) Types of broadcast programs.
RT (Radio Text) Text messages the station sends.
When a Radio Data System signal is not received, the
frequency is displayed.
•
*
•
PTY search
You can search for a program from the preset stations by
specifying PTY code.
While listening to a station...
1
“PTY” and “SELECT” appear alternately.
2 Select a PTY code.
3 Start searching.
When the System finds the one you have selected, that
station is tuned in.
To stop searching, press PTY SEARCH.
To search for another station, press PTY SEARCH while
the indications are flashing.
If no program is found, “NOTFOUND” appears.
•
•
•
Menu operations
To display the menu/to go back to the previous menu
To select an item on the menu
Notes:
Operate iPod touch or iPhone itself in the following
cases:
When operating the home button.
When selecting application icons on the home screen.
When dragging the slider.
Sound distortion may occur when playing back audio
sources with high recording levels. If distortion occurs,
it is recommended to turn off the equalizer of iPod. For
information on operating the iPod, see the instruction
manual for iPod.
•
–
–
–
•
Information shown on the display differs depending
on the type of the iPod.
To play back/pause iPod
Press
To select a track
Press or
To fast-forward a track
Press and hold
To fast-reverse a track:
Press and hold
To play back at random
Press repeatedly.
To play back repeatedly
Press repeatedly.
To put iPod in sleep mode
Press and hold
*
Stereo mini plug cord
Headphones (not supplied)
USB mass storage
class device
DO NOT turn off the System with the volume set to an extremely high level;
otherwise, the sudden blast of sound may damage your hearing, speakers, and
headphones when you turn on the System or start playback.
Notes on USB mass storage class device connection
Connect a USB mass storage class device when the
System is turned off to prevent malfunction.
Do not use a USB hub.
When connecting with a USB cable, use a USB 2.0 cable
whose length is less than 1 m.
The USB mass storage class device is charged through
the USB MEMORY terminal when “USB” is selected as
the source.
You cannot connect a computer to the USB MEMORY
terminal of the System.
Electrostatic shock at connecting a USB mass storage
class device may cause abnormal playback of the
device. In this case, disconnect the USB mass storage
class device then reset the System and the USB mass
storage class device.
While playing back a file on a USB mass storage class
device, do not disconnect the device. Doing so may
cause malfunction on both the System and the device.
•
•
•
•
•
•
•
Remote sensor
Notes on iPod connection
When detaching the dock adaptor from the dock,
pull up the dock adaptor with your fingernail or sharp
pointed tool using the slot.
Be careful not to injure your fingertips
or damage the terminal of the direct
dock.
DO NOT connect or disconnect the iPod when the
System is turned on.
Be sure to reduce the volume on the System to the
minimum level before connecting iPod. Adjust the
volume after starting playback.
You cannot send any data to the iPod from the System.
Do not carry the System with iPod connected. It might
cause damage to the dock or you might drop the iPod.
Do not touch or hit the iPod terminal pins or connector
pins in the dock for iPod directly. Doing so might cause
damage to the connector pins.
iPod is charged through the dock when the System is
turned on.
•
•
•
•
•
•
•
iPod
Basic operation
Playback operations
Searching for stations
“CD” lights up when an audio CD is set.
“USB” lights up when a USB device is connected.
“MP3” or “WMA” lights up while an MP3/WMA is
played.
To open the disc tray
Press 0 on the main unit.
To play back/pause a disc
Press
To play back/pause a USB mass storage class device
Press
To select a track
Press or
To fast-forward a track
Press and hold
To fast-reverse a track
Press and hold
To select a group
Press or
To stop playback
Press
•
•
•
Playback operations
FM radio
iPod/iPhone
Disc/USB
External
device
Adjusting the audio input level
You can change the audio input level through the AUDIO IN jack.
This function affects only the sound coming out through the
speakers.
•
Playback operation
Before viewing a video/picture from your iPod on your monitor:
Make the appropriate video setting on iPod. For details of the setting, see the instruction manual for iPod.
The HP indicator lights up when headphones are connected to the System.
Be sure to turn down the volume before connecting or putting on the headphones.•
STANDBY lamp
(On the main unit)
(While holding...)
LOCKED UNLOCKED
Program Play
While playback is stopped...
1
2 Select a track number (up to 32 tracks).
To cancel, press CANCEL.
3
To check the programmed contents, press 4 ¢ or .
To erase the entire program, press and hold CANCEL.
The PRGM indicator is turned off.
To exit from Program Play, press 7. The PRGM indicator
is turned off.
The stored program is kept.
Resume Play
This System stores the beginning of the stopped track.
When you start playback again, it starts from the
beginning of the stored track.
To clear the stored position, perform one of the
following operations:
Press 7 twice.
Open the disc tray.
Disconnect the USB mass storage class device.
This function cannot be used for Program Play.
•
•
•
•
–
•
–
–
–
•
Repeat Play
REP TRK 1 Repeats the current track.
REP GRP Repeats all tracks in the current group
(MP3/WMA only).
REP ALL ALL Repeats all tracks.
REP OFF Off Cancels.
Random Play
1
RND GRP RND
Plays tracks in the current group
in a random order (MP3/WMA
only).
RND ALL RND ALL Plays all tracks in a random
order.
RND OFF Off Cancels.
2or
or
1
1
1
11Turn on and off
the power.
2
2
2
22Select a source.
3
3
3
33Adjust the volume.
Label side
Stereo mini plug cord
(not supplied)
Dock adaptor (supplied with
the iPod or sold separately)
RESUME
Canceled
TUNER FM AUDIO IN
NORMALHIGH
(Hold) (Hold)
TUNER FM AUDIO IN
MONO STEREO
Frequency
PS (NO PS*) PTY (NO PTY*) RT (NO RT*)
Clock
1
1
1
11
2
2
2
22
3
3
3
33In this manual, “iPod” means iPod, iPod touch and iPhone device. When iPod touch or iPhone device is especially
mentioned, “iPod touch” or “iPhone” is used in this case.
M515_EX_5th.indd 2
M515_EX_5th.indd 2
M515_EX_5th.indd 2
M515_EX_5th.indd 2M515_EX_5th.indd 2 10.8.24 9:51:47 AM
10.8.24 9:51:47 AM
10.8.24 9:51:47 AM
10.8.24 9:51:47 AM10.8.24 9:51:47 AM

Produktspezifikationen

Marke: Kenwood
Kategorie: Hi-Fi-Anlage
Modell: M-515-S

Brauchst du Hilfe?

Wenn Sie Hilfe mit Kenwood M-515-S benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten


Bedienungsanleitung Hi-Fi-Anlage Kenwood

Kenwood

Kenwood HM-383MD Bedienungsanleitung

16 August 2024
Kenwood

Kenwood C-414-W Bedienungsanleitung

15 August 2024
Kenwood

Kenwood M817DAB Bedienungsanleitung

11 August 2024
Kenwood

Kenwood XD-8038 Bedienungsanleitung

5 August 2024
Kenwood

Kenwood M-820DAB-W Bedienungsanleitung

3 August 2024
Kenwood

Kenwood XD-9580 Bedienungsanleitung

30 Juli 2024
Kenwood

Kenwood KAC-7205 Bedienungsanleitung

29 Juli 2024
Kenwood

Kenwood HM-382MD Bedienungsanleitung

29 Juli 2024
Kenwood

Kenwood XD-6551 Bedienungsanleitung

28 Juli 2024
Kenwood

Kenwood M-725DAB Bedienungsanleitung

28 Juli 2024

Bedienungsanleitung Hi-Fi-Anlage

Neueste Bedienungsanleitung für -Kategorien-

Lenco

Lenco MC-129 MP3 Bedienungsanleitung

16 Oktober 2024
Akai

Akai EIE Pro Bedienungsanleitung

14 Oktober 2024
Sennheiser

Sennheiser SZI 1029 Bedienungsanleitung

7 Oktober 2024
Yamaha

Yamaha MusicCast SRT-1500 Bedienungsanleitung

7 Oktober 2024
Kicker

Kicker 46HDTPH Bedienungsanleitung

7 Oktober 2024
Vtech

Vtech V-Kids Bedienungsanleitung

5 Oktober 2024
Hitachi

Hitachi AX-M10E Bedienungsanleitung

5 Oktober 2024
IDance

IDance XD8N Bedienungsanleitung

5 Oktober 2024
LD Systems

LD Systems DAVE 18 G3 Bedienungsanleitung

4 Oktober 2024
Pyle Pro

Pyle Pro PWMA1216BM Bedienungsanleitung

4 Oktober 2024