Kenwood KDC-X898 Bedienungsanleitung
Lesen Sie kostenlos die š deutsche Bedienungsanleitung fĆ¼r Kenwood KDC-X898 (100 Seiten) in der Kategorie Autoradio. Dieser Bedienungsanleitung war fĆ¼r 18 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet
Seite 1/100
IM381_Ref_K_en_00Ā© 201 JVC KENWOOD 3 Corporation
KDC-X998
KDC-BT958HD
KDC-X898
KDC-BT858U
CD-RECEIVER
INSTRUCTION MANUAL
Take the time to read through this instruction manual.
Familiarity with installation and operation procedures will help you obtain the best performance from your new
CD-receiver.
For your records
Record the serial number, found on the back of the unit, in the spaces designated on the warranty card, and in the space
provided below. Refer to the model and serial numbers whenever you call upon your Kenwood dealer for information or
service on the product.
Model KDC-X998/ KDC-BT958HD/ KDC-X898/ KDC-BT858U Serial number
US Residence Only
Register Online
Register your Kenwood product at ww w.Kenwoodusa.com
2 | KDC-X998/ KDC-BT958HD/ KDC-X898/ KDC-BT858U
Contents
1. Before use 4
1-1. Safety precaution
1-2. Important information
1-3. Regulatory Compliance
2. Appendix 8
2-1. Speciļ¬cations
2-2. Trademarks
3. Basic operations 12
3-1. Component names
3-2. Preparations
3-3. How to select the item
3-4. Adjusting the clock
3-5. General operations
4. Audio adjustments (KDC-X898, KDC-
BT858U) 16
4-1. Audio control
4-2. Audio preset
4-3. Audio preset recall
5. DSP settings (KDC-X998, KDC-
BT958HD) 18
5-1. Audio control
5-2. Manual equalizer control
5-3. Car type selection
5-4. Speaker setting
5-5. XāOver setting
5-6. Listening position setting
5-7. Delay time control
5-8. Channel level ļ¬ne adjustments
5-9. Resetting of DTA Settings
5-10. DSP preset
5-11. DSP preset recall
6. Listen to the iPod 26
6-1. Models of iPods/iPhones that can be
connected to this unit
6-2. Playing music
6-3. Music search
6-4. Alphabet search
6-5. Direct search
6-6. Skip search
6-7. Skip search ratio setting
6-8. Playback mode
6-9. App & iPod mode setting search
7. PandoraĀ® 32
7-1. Requirements PandoraĀ®
7-2. Listening to PandoraĀ®
7-3. Basic operation
7-4. Station search
7-5. Bookmark registration
7-6. New Station Creation
7-7. Deletion of station
7-8. Pandora source control
8. Aha Radio 36
8-1. Requirements Ahaā¢
8-2. Listening to the Aha Radio
8-3. Basic operations
8-4. Station search
8-5. Calling a number in the content
8-6. Aha source control
9. iHeartRadio 40
9-1. Requirements iHeartRadioā¢
9-2. Listening to the iHeartRadio
9-3. Basic operations
9-4. Station search
9-5. Station scan
9-6. Favorite station delete
9-7. iHeartRadio source control
10. Listen to the CD/ Audio ļ¬le 44
10-1. Playing music
10-2. Music search
10-3. Skip search
10-4. Skip search ratio setting
10-5. Playback mode
10-6. Direct music search
10-7. Drive change
10-8. About the Audio ļ¬le
10-9. About the USB device
10-10. About āKENWOOD Music Editor Lightā and
āKENWOOD Music Controlā
10-11. About the discs used with this unit
10-12. Handling discs
11. Listen to the tuner (KDC-X898, KDC-
BT858U) 50
11-1. Listening to the radio
11-2. Station preset memory
11-3. Auto memory
11-4. Recall preset station
11-5. Tuner setting
11-6. Direct access tuning
11-7. PTY (Program Type)
English | 3
12. Listen to the HD Radioā¢ tuner (KDC-
X998, KDC-BT958HD) 54
12-1. About HD Radioā¢ Technology
12-2. Listening to the HD Radio tuner
12-3. Station preset memory
12-4. Auto memory
12-5. Recall preset station
12-6. iTunes tagging
12-7. Direct access tuning
12-8. HD Radio tuner setting
13. Display settings 58
13-1. Selecting a display type
13-2. Information display setting
13-3. Illumination color selection
13-4. Adjusting the Illumination color
13-5. Selecting a text display
13-6. Display & Illumination setting
14. General settings 64
14-1. Adjusting the date
14-2. Clock & date display type setting
14-3. Auxiliary input display setting
14-4. Demonstration mode setting
14-5. Initial settings
15. Registering a Bluetooth 68
15-1. About the Bluetooth module
15-2. Registering a Bluetooth device
15-3. Selecting the Bluetooth device you wish to
connect
15-4. Deleting a registered Bluetooth device
15-5. Bluetooth device registration test
16. Hands-free phoning 72
16-1. Receiving a call
16-2. Calling a number in the phone book
16-3. Dialing a number
16-4. Calling a number in the call log
16-5. Speed dialing (Preset dial)
16-6. Registering in the preset dial number list
16-7. During a call
16-8. Clearing the disconnection message
16-9. Voice Control
16-10. Display of phone number types
(categories)
17. Bluetooth audio 78
17-1. Before use
17-2. Basic operations
17-3. Playback mode
18. Bluetooth settings 80
18-1. Registering the PIN code
18-2. Downloading the phone book
18-3. Deleting the phone book
18-4. Displaying the ļ¬rmware version
18-5. Switching between two connected cell-
phones
18-6. Bluetooth detail setting
19. SiriusXMĀ® Satellite Radio (optional
tuner and service required) 84
19-1. Before use
19-2. Listening to the SiriusXMĀ® Satellite Radio
19-3. Category and channel search
19-4. Channel preset memory
19-5. Preset tuning
19-6. Smart Favorites, Tune Startā¢
19-7. Direct access tuning
19-8. iTunes tagging
19-9. Parental Lock setting
19-10. Clearing the Parental Lock setting
19-11. Setting Parental Lock for Mature content
19-12. Parental Lock pass code setting
19-13. Setting the Song and Artist Alerts
19-14. Song or Artist setting
19-15. Editing a Song or Artist item
19-16. Delete a Song or Artist item
19-17. SiriusXMĀ® Replay
19-18. Channel skip setting
19-19. Clearing the channel skip setting
19-20. SiriusXM tuner setting
20. Basic operation of remote control 94
20-1. Before using remote control
20-2. Basic opreation
21. Troubleshooting guide 96
21-1. Setting error
21-2. Operation/wiring error
21-3. Error messages
4 | KDC-X998/ KDC-BT958HD/ KDC-X898/ KDC-BT858U
1. Before use
1-1. Safety precaution
# WARNING
To prevent injuries or a ļ¬re, take the following
precautions:
ā¢ī Stop the car before operating the unit.
ā¢ī To prevent a short circuit, never put or leave any
metallic objects (such as coins or metal tools) inside
the unit.
! CAUTION
ā¢ī Adjust the volume so that you can hear the sound
outside the car. Driving with the volume too high
may cause an accident.
ā¢ī Wipe oļ¬ the dirt on the panel with a dry silicon or
soft cloth.
Failure to observe this precaution may result in
damage to the monitor or unit.
ā¢ī If you experience problems during installation,
consult your Kenwood dealer.
1-2. Important information
Before using the this unit for the ļ¬rst time
This unit is factory-set to operate in the
Demonstration mode initially.
When using this unit for the ļ¬rst time, cancel
the Demonstration mode. Refer to <Cancel the
Demonstration mode> (page 13).
Cleaning the connector
The unit may not function properly if the connectors
between the unit and faceplate are dirty. Detach the
faceplate and clean the connector with a cotton swab
gently, being careful not to damage the connector.
Condensation
When the car is air-conditioned, moisture may collect
on the laser lens. This may cause disc read errors. In
this case, remove the disc and wait for the moisture
to evaporate.
How to reset your unit
If the unit fails to operate properly, press the Reset
button. The unit returns to the factory settings when
the Reset button is pressed.
Notes
ā¢ī When you purchase optional accessories, check with
your Kenwood dealer to make sure that they can
work with your model and in your area.
ā¢ī Characters that conform to ISO 8859-1 can be
displayed.
ā¢ī The illustrations of the display and panel appearing
in this manual are examples used to explain more
clearly how the controls are used. Therefore, what
appears on the display in the illustrations may diļ¬er
from what appears on the display on the actual
English | 5
equipment, and some of the images on the display
may be inapplicable.
6 | KDC-X998/ KDC-BT958HD/ KDC-X898/ KDC-BT858U
1-3. Regulatory Compliance
#CAUTION
Use of controls or adjustments or performance of
procedures other than those speciļ¬ed herein may
result in hazardous radiation exposure.
In compliance with Federal Regulations, following
are reproductions of labels on, or inside the product
relating to laser product safety.
JVC KENWOOD Corporation
2967-3, ISHIKAWA-MACHI,
HACHIOJI-SHI, TOKYO, JAPAN
THIS PRODUCT COMPLIES WITH DHHS RULES
21 CFR SUBCHAPTER J IN EFFECT AT DATE OF
MANUFACTURE.
Location : Top plate
FCC WARNING
This equipment may generate or use radio
frequency energy. Changes or modiļ¬cations to this
equipment may cause harmful interference unless
the modiļ¬cations are expressly approved in the
instruction manual. The user could lose the authority
to operate this equipment if an unauthorized change
or modiļ¬cation is made.
FCC NOTE
This equipment has been tested and found to
comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against
harmful interference in a residential installation. This
equipment may cause harmful interference to radio
communications, if it is not installed and used in
accordance with the instructions. However, there
is no guarantee that interference will not occur in a
particular installation. If this equipment does cause
harmful interference to radio or television reception,
which can be determined by turning the equipment
oļ¬ and on, the user is encouraged to try to correct
the interference by one or more of the following
measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and
receiver.
Connect the equipment into an outlet on a circuit
diļ¬erent from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV
technician for help.
IC (Industry Canada) Notice
Operation is subject to the following two conditions:
(1)This device may not cause interference, and
(2)this device must accept any interference, including
interference that may cause undesired operation of
the device.
The term āIC: ā before the certiļ¬cation/ registration
number only signiļ¬es that the Industry Canada
technical speciļ¬cation were met.
#CAUTION
This equipment complies with FCC/IC radiation
exposure limits set forth for an uncontrolled
environment and meets the FCC radio frequency (RF)
Exposure Guidelines in Supplement C to OET65 and
RSS-102 of the IC radio frequency (RF) Exposure rules.
This equipment has very low levels of RF energy that
it deemed to comply without maximum permissive
exposure evaluation (MPE). But it is desirable that it
should be installed and operated keeping the radiator
at least 20cm or more away from personās body
(excluding extremities: hands, wrists, feet and ankles).
Under Industry Canada regulations, this radio
transmitter may only operate using an antenna of a
type and maximum (or lesser) gain approved for the
transmitter by Industry Canada. To reduce potential
radio interference to other users, the antenna type
and its gain should be so chosen that the equivalent
isotropically radiated power (e.i.r.p.) is not more than
that necessary for successful communication.
-----------------------------------------------------------------------------------
ā¢ī Contains Transmitter Module
FCC ID : XQN-BTR60X
ā¢ī Contains Transmitter Module
IC: 9688A-BTR601
-----------------------------------------------------------------------------------
Before use
English | 7
CALIFORNIA, USA
This product contains a CR Coin Cell Lithium Battery
which contains
Perchlorate Material ā special handling may apply.
See www.dtsc.ca.gov/hazardouswaste/perchlorate
InformaciĆ³n acerca de la eliminaciĆ³n de
equipos elĆ©ctricos y electrĆ³nicos al ļ¬nal
de la vida Ćŗtil (aplicable a los paĆses que
hayan adoptado sistemas independientes
de recogida de residuos)
Los productos con el sĆmbolo de un contenedor con
ruedas tachado no podrƔn ser desechados como
residuos domƩsticos.
Los equipos elĆ©ctricos y electrĆ³nicos al ļ¬nal de la
vida Ćŗtil, deberĆ”n ser reciclados en instalaciones
que puedan dar el tratamiento adecuado a
estos productos y a sus subproductos residuales
correspondientes. PĆ³ngase en contacto con su
administraciĆ³n local para obtener informaciĆ³n sobre
el punto de recogida mƔs cercano. Un tratamiento
correcto del reciclaje y la eliminaciĆ³n de residuos
ayuda a conservar los recursos y evita al mismo
tiempo efectos perjudiciales en la salud y el medio
ambiente.
Para cumplimiento de la COFETEL:
āLa operacion de este equipo esta sujeta a las
siguientes dos condiciones:
(1) es posible que este equipo o dispositivo no cause
interferencia perjudicial y
(2) este equipo o dispositivo debe aceptar cualquier
interferencia,
incluyendo la que pueda causar su operacion no
deseada.ā
8 | KDC-X998/ KDC-BT958HD/ KDC-X898/ KDC-BT858U
2. Appendix
2-1. Speciļ¬cations
FM tuner section
Frequency range (200 kHz step)
: 87.9 MHz ā 107.9 MHz
Usable sensitivity (S/N = 30dB)
: 9.3dBf (0.8 Ī¼V/75 ā¦)
Quieting Sensitivity (S/N = 46dB)
: 10.2 dBf (1.13 Ī¼V/75 ā¦)
Frequency response (Ā±3 dB)
: 30 Hz ā 15 kHz
Signal to Noise ratio
: 75 dB (MONO)
Stereo separation
: 45 dB (1 kHz)
Digital FM tuner section (KDC-X998/
KDC-BT958HD)
Frequency range (200 kHz step)
: 87.9 MHz ā 107.9 MHz
Frequency response (Ā±3 dB)
: 20 Hz ā 20 kHz
Signal to Noise ratio (STEREO)
: 75 dB
AM tuner section
Frequency range (10 kHz step)
: 530 kHz ā 1700 kHz
Usable sensitivity (S/N = 20dB)
: 28 dBĀµ (25 ĀµV)
Digital AM tuner section (KDC-X998/
KDC-BT958HD)
Frequency range (10 kHz step)
: 530 kHz ā 1700 kHz
Frequency response (Ā±3 dB)
: 40 Hz ā 15 kHz
Signal to Noise ratio (STEREO)
: 70 dB
CD player section
Laser diode
: GaAlAs
Digital ļ¬lter (D/A)
: 8 Times Over Sampling
D/A Converter
: 24 Bit
Spindle speed (Audio ļ¬les)
: 500 ā 200 rpm (CLV)
Wow & Flutter
: Below Measurable Limit
Frequency response (Ā±1 dB)
: 10 Hz ā 20 kHz
Total harmonic distortion (1 kHz)
KDC-X998 KDC-X898
: 0.008 %
KDC-BT958HD KDC-BT858U
: 0.010 %
Signal to Noise ratio (1 kHz)
KDC-X998 KDC-X898
: 110 dB
KDC-BT958HD KDC-BT858U
: 105 dB
Dynamic range
: 93 dB
MP3 decode
: Compliant with MPEG-1/2 Audio Layer-3
WMA decode
: Compliant with Windows Media Audio
AAC decode
: AAC-LC ā.m4aā ļ¬les
USB interface
USB Standard
: USB1.1/ 2.0 (Full speed)
File System
: FAT12/16/ 32
Maximum Supply current
: DC 5 V 1 A=
Decode
: MP3, WMA, AAC, WAV
10 | KDC-X998/ KDC-BT958HD/ KDC-X898/ KDC-BT858U
2-2. Trademarks
ā¢ī The Bluetooth word mark and logos are owned by
the Bluetooth SIG, Inc. and any use of such marks
by JVC KENWOOD Corporation is under license.
Other trademarks and trade names are those of their
respective owners.
ā¢ī āMade for iPodā and āMade for iPhoneā mean that an
electronic accessory has been designed to connect
speciļ¬cally to iPod or iPhone, respectively, and has
been certiļ¬ed by the developer to meet Apple
performance standards. Apple is not responsible for
the operation of this device or its compliance with
safety and regulatory standards. Please note that the
use of this accessory with iPod or iPhone may aļ¬ect
wireless performance.
ā¢ī iPhone, iPod, iPod classic, iPod nano, and iPod touch
are trademarks of Apple Inc., registered in the U.S.
and other countries.
ā¢ī iTunes and Safari are trademark of Apple Inc.
ā¢ī Sirius, XM and all related marks and logos are
trademarks of Sirius XM Radio Inc. All rights reserved.
ā¢ī HD Radio Technology manufactured under
license from iBiquity Digital Corporation. U.S. and
Foreign Patents. HD Radioā¢ and the HD, HD Radio,
and āArcā logos are proprietary trademarks of
iBiquity Digital Corp.
ā¢ī PANDORA, the PANDORA logo, and the Pandora
trade dress are trademarks or registered trademarks
of Pandora Media, Inc., used with permission.
ā¢ī aha, the Aha logo, and the Aha trade dress are
trademarks or registered trademarks of HARMAN
International Industries, used with permission.
ā¢ī iHeartRadioĀ® is a registered mark of Clear Channel
Broadcasting, Inc. in the United States and other
countries. Such marks are used under license.
ā¢ī Android and Chrome are trademark of Google Inc.
ā¢ī BlackBerryĀ®, RIMĀ®, Research In MotionĀ® and related
trademarks, names and logos are the property
of Research In Motion Limited and are registered
and/or used in the U.S. and countries around the
world. Used under license from Research In Motion
Limited.
ā¢ī Internet Explorer and Windows Media are registered
trademark of Microsoft Corporation in the United
States and other countries.
ā¢ī The āAACā logo is a trademark of Dolby Laboratories.
Appendix
English | 11
12 | KDC-X998/ KDC-BT958HD/ KDC-X898/ KDC-BT858U
3. Basic operations
3-1. Component names
(1) (2) (4)(3)
(5)
(6) (7)
(8)(9)( )( )(12) 1011
(1) [ /1 6] button
When listening to the iPod, audio file, CD, or radio,
press this button to enter the search mode.
In each of the selected modes, press the button to
return to the previous item.
(2) [SRC] button
Press this button to enter source select mode. Refer
to <Source selection> (page 14).
(3) [Control] knob (Volume knob)
In the normal mode, turn the knob to adjust the
volume or press the knob to enter the Function
setting mode.
In the Function mode, turn the knob to select an
item or press the knob to determine the selection.
(4) [R]/ [S] button
Press the button to select an audio file folder or use
it as a Likes/ Dislikes button on Aha etc.
The [ ] button can be used to select broadcast R
band as well.
(5) [G] button
Press the button to eject the disc.
(6) Disc slot cover
When this cover opens upward, the disc insertion
slot appears
(7) USB terminal (inside of the cover)
Connect an iPod or USB device.
(8) Auxiliary input (inside of the cover)
Connect the output of an external device using a
stereo mini-jack.
(9) REAR USB indicator
When a USB device or iPod is connected to the USB
terminal of the rear, this indicator stays lit. During
playback of the connected device, this indicator
blinks.
(10) [E]/ [F] button
Press the button to select a song or station.
(11) Release button
Press the button to detach the faceplate.
(12) [Ć] button
Press the button to make, answer, or disconnect a
hands-free call.
English | 13
3-2. Preparations
Cancel the Demonstration mode
Cancel the Demonstration mode when you use the
unit for the ļ¬rst time after installation.
ī Press [Control] knob to cancel the
Demonstration mode when the message āTo
cancel DEMO Press the volume knobā appears
(approx. 15 seconds).
ī Turn [Control] knob to select the āYESā, and
then press [Control] knob.
The Demonstration mode can also be canceled
in the Function Setting mode. Refer to <14-4.
Demonstration mode setting> (page 65).
Detaching/ Attaching the faceplate
!
ā¢ī Remove the faceplate at once after pressing the
Release button; otherwise it can fall down due to
vibration.
ā¢ī The faceplate is a precision component of the unit
and can be damaged by shocks or jolts.
ā¢ī Keep the faceplate in its case while detached.
ā¢ī Do not place the faceplate (and case) in areas
exposed to direct sunlight, excessive heat or
humidity. Also avoid places with too much dust or
the possibility of water splashing.
3-3. How to select the item
For how to select setting items such as a function
setting item, see the following example:
Example: Setting the Date format of the display
ī Press [Control] knob.
āFunctionā appears and enters the Function setting
mode.
ī Select the Date Mode function item
Turn [Control] knob to select āSettingsā, and
then press [Control] knob.
Next, turn [Control] knob to select āClock&Dateā,
and then press [Control] knob.
Finally, turn [Control] knob to select āDate
Modeā, and then press [Control] knob.
To cancel and return to the previous item, press
[ / ].1 6
ī Turn [Control] knob to select a format (7
types), and then press [Control] knob.
Returns to the previous item.
ī Press and hold [1 6/ ].
Exits the Function setting mode.
About the description in this manual
ā¢ī In this manual, operations performed in steps 2 and 3 are
described as follows:
2. Select āSettingsā
> āClock&Dateā āDate Modeā >
using [Control] knob.
3. Select a format (7 types) using [Control] knob.
14 | KDC-X998/ KDC-BT958HD/ KDC-X898/ KDC-BT858U
Basic operations
3-5. General operations
Power
Press [SRC] to turn the power ON.
Press and hold [SRC] to turn the power OFF.
Source selection
1 Press [SRC].
The currently selected source is displayed and
enters the Source selection mode.
2 Select a source using [Control] knob.
Source Display
Standby āSTANDBYā
SiriusXM (optional accessory)[1] āSiriusXMā
HD Radio āHD RADIOā[2]
Tuner āTUNERā[3]
USB device connected to front USB terminal āUSB(FRONT)ā
USB device connected to rear USB terminal āUSB(REAR)ā
iPod connected to front USB terminal[1] āiPod(FRONT)ā
iPod connected to rear USB terminal[1] āiPod(REAR)ā
PandoraĀ® of iPod connected to front USB
terminal[1]
āPandora(FRONT)ā
PandoraĀ® of iPod connected to rear USB
terminal[1]
āPandora(REAR)ā
PandoraĀ® of device connected via Bluetooth[1] āPandoraā
iHeartRadio of iPod connected to front USB
terminal [1]
āiHeartRADIO (FRONT)ā
iHeartRadio of iPod connected to rear USB
terminal [1]
āiHeartRADIO (REAR)ā
iHeartRadio of device connected via
Bluetooth[1]
āiHeartRADIOā
ahaā¢ of iPod connected to front USB
terminal[1]
āaha(FRONT)ā
ahaā¢ of iPod connected to rear USB
terminal[1]
āaha(REAR)ā
ahaā¢ of device connected via Bluetooth[1] āahaā
Bluetooth audio āBT AUDIOā
CD āCDā[1]
Auxiliary Input āAUXā
[1] This source can be selected only when it can be played.
[2] Function of KDC-X998/ KDC-BT958HD.
[3] Function of KDC-X898/ KDC-BT858U.
Setting the source switching
ā¢ī Source switching can be set so that pressing [SRC] switches
among sources. For more details, refer to <14-5. Initial
settings> (page 66).
ā¢ī Source switching can be set so that āPandoraā, āiHeartRADIOā,
āahaā, and āAUXā sources can not be selected when not in
use. For more details, refer to <14-5. Initial settings> (page
66).
3-4. Adjusting the clock
1 Press [Control] knob.
Enters the Function setting mode.
2 Select āSettingsā āClock&Dateā āClock > >
Adjustā using [Control] knob.
For how to use [Control] knob, refer to <3-3. How
to select the item> (page 13).
3 Set the hour using [Control] knob.
4 Set the minute using [Control] knob.
Exiting from the Function setting mode
Press and hold [1 6/ ].
English | 15
Volume
Turn [Control] knob.
USB terminal
A USB device or iPod can be connected.
The CA-U1EX (Max. 500mA) (optional accessory) is
recommended to connect a USB device.
The KCA-iP102 (optional accessory) is
recommended to connect a iPod.
When connecting devices featuring the Lightning
connector, KCP-iP102 (optional accessory) and
Apple Lightning to 30-pin Adapter are necessary.
Do not keep Apple Lightning to 30-pin Adapter in
your car to avoid the damage by heat.
Auxiliary input
A portable audio device can be connected with
a stereo mini-plug (3.5 mm Ćø).
16 | KDC-X998/ KDC-BT958HD/ KDC-X898/ KDC-BT858U
4. Audio adjustments (KDC-X898, KDC-BT858U)
āDetailed Settingsā
āHPFā High Pass Filter Through/ 100/ 120
150 (Hz)
āLPF SubWooferā Low Pass Filter 85/ 120/ 160/ T
(Hz)
āSubWoofer
Phaseā[4] Subwoofer Phase Reverse (180Ā°)/
Normal (0Ā°)
āSupremeā[5] Supreme setting OFF/ ON
āAudio Presetā Audio Preset
memory[2] Recall/ Memory
āVolume Oļ¬setā Volume oļ¬set ā8 ā Ā±0 (dB)
(AUX: -8 ā +8)
[1] Function of KDC-X898.
[2] Refer to <4-2. Audio preset> (page 17) <4-3. Audio ,
preset recall> (page 17).
[3] āUserā: The customized Bass, Middle, and Treble settings
are eļ¬ective.
[4] Displayed only when āLPF SubWooferā is set to ā85ā/
ā120ā/ ā160ā.
[5] Audio ļle source only
ī Select a value using [Control] knob.
Exiting from the Function setting mode
Press and hold [1 6/ ].
Adjusting Bass, Middle, and Treble levels
ā¢ī You can set Bass, Middle, and Treble levels for each source.
4-1. Audio control
You can adjust the audio control items.
ī Press [SRC] and select a source other than
Standby (āSTANDBYā) using [Control] knob.
Refer to <Source selection> (page 14).
ī Press [Control] knob.
Enters the Function setting mode.
ī Select āAudio Controlā using [Control] knob.
For how to use [Control] knob, refer to <3-3. How
to select the item> (page 13).
ī Select a audio control item using [Control]
knob.
Display RangeAudio control item
āSubWoofer Levelā Subwoofer level ā15 ā +15 (dB)
āBass Levelā Bass level ā8 ā +8 (dB)
āMiddle Levelā Middle level ā8 ā +8 (dB)
āTreble Levelā Treble level ā8 ā +8 (dB)
āEqualizer PROā[1]
āBass Adjustā
āBass Center FRQā Bass Center Frequency 60/ 80/ 100/ 200 (Hz)
āBass Levelā Bass level ā8 ā +8 (dB)
āBass Q Factorā Bass Q Factor 1.00/ 1.25/ 1.50/ 2.00
āBass EXTā Bass Extend OFF/ ON
āMiddle Adjustā
āMiddle Center
FRQā Middle Center
Frequency 0.5/ 1.0/ 1.5/ 2.5 (kHz)
āMiddle Levelā Middle level ā8 ā +8 (dB)
āMiddle Q Factorā Middle Q Factor 0.75/ 1.00/ 1.25
āTreble Adjustā
āTreble Center
FRQā Treble Center
Frequency 10.0/ 12.5/ 15.0/
17.5 kHz
āTreble Levelā Treble level ā8 ā +8 (dB)
āPreset Equalizerā Preset Equalizer curve āDrive Equalizerā/
āTop40ā/ āPowerfulā/
āRockā/ āPopsā/ āEasyā/
āJazzā/ āNaturalā/
āUserā[3]
āBass Boostā Bass Boost āOFFā/ āLevel1ā/
āLevel2ā/ āLevel3ā
āLoudnessā Loudness āOFFā/ āLevel1ā/
āLevel2ā
āBalanceā Balance Left 15 ā Right 15
āFaderā Fader Rear 15 ā Front 15
āSubWooferā Subwoofer output ON/ OFF
English | 17
4-3. Audio preset recall
You can recall the Audio control items registered to
the .<4-2. Audio preset> (page 17)
ī Press [SRC] and select a recall source using
[Control] knob.
Refer to <Source selection> (page 14).
ī Press [Control] knob.
Enters the Function setting mode.
ī Select āAudio Controlā > āDetailed Settingsā >
āAudio Presetā > āRecallā using [Control] knob.
For how to use [Control] knob, refer to <3-3. How
to select the item> (page 13).
ī Select āYESā using [Control] knob.
āRecall Completedā appears.
Exiting from the Function setting mode
Press and hold [1 6/ ].
4-2. Audio preset
You can register the values set the Audio control
items.
ī Set the audio control items
Refer to <4-1. Audio control> (page 16).
ī Select āAudio Controlā āDetailed Settingsā >
> āAudio Presetā > āMemoryā using [Control]
knob.
For how to use [Control] knob, refer to <3-3. How
to select the item> (page 13).
ī Select āYESā using [Control] knob.
āMemory Completedā appears.
Exiting from the Function setting mode
Press and hold [1 6/ ].
Number of Audio preset memories that can be stored
ā¢ī Register a pair of Audio preset memories. You cannot
register them by source.
When reset
ā¢ī When you press the Reset button, audio control values of all
sources will be set to the values registered here.
Audio control items that can be registered
ā¢ī The following Audio control items can be registered.
āBass Center FRQā , āBass Levelā, āBass Q Factorā* *, āBass EXTā*,
āMiddle Center FRQā , āMiddle Levelā, āMiddle Q Factorā* *,
āTreble Center FRQā*, āTreble Levelā, āSubWoofer Levelā, āHPFā,
āLPF SubWooferā, āSubWoofer Phaseā
*KDC-X898 only
18 | KDC-X998/ KDC-BT958HD/ KDC-X898/ KDC-BT858U
5. DSP settings (KDC-X998, KDC-BT958HD)
5-1. Audio control
You can adjust the audio control items.
ī Press [SRC] and select a source other than
Standby (āSTANDBYā) using [Control] knob.
Refer to <Source selection> (page 14).
ī Press [Control] knob.
Enters the Function setting mode.
ī Select āAudio Controlā using [Control] knob.
For how to use [Control] knob, refer to <3-3. How
to select the item> (page 13).
ī Select a audio control item using [Control]
knob.
Display Overview
āSubWoofer Levelā You can set subwoofer level.
āā15ā ā ā0ā ā ā+15ā
āDrive Equalizerā Sets the sound quality to reduce the road [5]
noise.
āONā/ āOFFā
āPreset Equalizerā Select from among preset equalizer curves [1][5]
to set the sound quality.
ā āUser [2]/ āiPodā(During iPod source
only)/ āTop 40ā/ āPowerfulā/ āRockā/
āPopsā/ āEasyā/ āJazzā/ āNaturalā
āManual Equalizerā Set the equalizer curve manually.[1][5]
Refer to <5-2. Manual equalizer control>
(page 19).
āPro Setupā
āDSP Setā Turn on/oļ¬ the DSP function.
āBypassā: Disables the DSP function.
āThroughā: Enables the DSP function.
āCar Typeā[5] To get clear sound, set the sound
environment according to the location and
size of physically installed speakers with
reference to the followings:
<5-3. Car type selection> (page 19)
<5-4. Speaker setting> (page 20)
<5-5. XāOver setting> (page 20)
<5-6. Listening position setting> (page
21)
<5-7. Delay time control> (page 22)
<5-8. Channel level ļne adjustments>
(page 23)
āSpeaker Settingā[5]
āXāOverā[5]
āDTA Settingsā[5]
āSound Enhancementsā[5]
āSupremeā[6] Turns ON/OFF the Supreme function.
Can be set while Audio ļle source of USB/
CD and iPod source.
āONā/ āOFFā
āSpace Enhancerā[3]
[4] Virtually enhances the sound space using
the DSP.
āOFFā/ āSmallā/ āMediumā/ āLargeā
āSound Realizerā Virtually makes the sound more realistic [4]
using the DSP.
āOFFā/ āLevel1ā/ āLevel2ā/ āLevel3ā
āSound Elevationā Virtually raises the sound ļeld us[4]
the DSP.
āOFFā/ āLowā/ āMiddleā/ āHighā
āVolume oļ¬setā Sets each sourceās volume as a diļ¬
from the basic volume.
āā8ā ā ā ā (AUX: āā8āā ā+8ā)0
āSubWoofer Muteā Sets the Subwoofer Mute.
āONā/ āOFFā
āAudio Presetā You can register the values set the A
control items.
Refer to <5-10. DSP preset> (page
24), <5-11. DSP preset recall> (page
24).
āBass Boostā Sets the Bass Boost level in 3 step[5] āOFFā/ āLevel1ā/ āLevel2ā/ āLevel3ā
āLoudnessā[5] Makes the sounds at high and low
frequencies louder.
āOFFā/ āLowā/ āHighā
āBalanceā Adjusts left/right speaker balance.
āLeft15ā ā ā ā ā āRight15ā0
āFaderā Adjusts front/rear speaker balance.
āRear15ā ā ā ā ā āFront15ā0
(Colored text: Factory setting)
[1] You can select for each source.
[2] āUserā: The Equalizer curve set in the section <5-2.
Manual equalizer control> (page 19) is recalled.
[3] This function is not eļ¬ective for the HD Radio source.
[4] Function of KDC-X998.
[5] Displayed only when āDSP Setā is set to āThroughā.
[6] Audio ļle source only
ī Select a value using [Control] knob.
Exiting from the Function setting mode
Press and hold [1 6/ ].
When you selected āiPodā for āPreset Equalizerā
ā¢ī When you selected āiPodā for āPreset Equalizerā, next select
an equalizer curve. Select a desired equalizer curve using
[Control] knob from among 22 equalizer curves displayed
after you selected āiPodā.
English | 19
5-2. Manual equalizer control
You can adjust the equalizer curve manually.
ī Press [SRC] and select a source other than
Standby (āSTANDBYā) using [Control] knob.
Refer to <Source selection> (page 14).
ī Press [Control] knob.
Enters the Function setting mode.
ī Select āAudio Controlā āManual Equalizerā >
using [Control] knob.
For how to use [Control] knob, refer to <3-3. How
to select the item> (page 13).
ī Select a equalizer control item using [Control]
knob.
Display Description Range
āGainā Adjust the gain of each band. -9 ā ā +9 dB0
āQ Factorā Adjust Q of each band.[1] 1.35/ 1.50/ 2.00
āBass EXTā ā āOFFā/ āONā
(Colored text: Factory setting)
[1] Function of KDC-X998.
When āBass EXTā and āQ Factorā are selected, skip
step 5.
ī Select a Band using [Control] knob.
KDC-X998
āBAND1ā; 62.5 Hz, āBAND2ā; 100 Hz,
āBAND3ā; 160 Hz, āBAND4ā; 250 Hz,
āBAND5ā; 400 Hz, āBAND6ā; 630 Hz,
āBAND7ā; 1 kHz, āBAND8ā; 1.6 kHz,
āBAND9ā; 2.5 kHz, āBAND10ā; 4 kHz,
āBAND11ā; 6.3 kHz, āBAND12ā; 10 kHz,
āBAND13ā; 16kHz
KDC-BT958HD
āBAND1ā; 62.5 Hz, āBAND2ā; 160 Hz,
āBAND3ā; 400 Hz, āBAND4ā; 1 kHz,
āBAND5ā; 2.5 kHz, āBAND6ā; 6.3 kHz,
āBAND7ā; 16 kHz
ī Select a value using [Control] knob.
Exiting from the Function setting mode
Press and hold [1 6/ ].
When the āManual Equalizerā item is not displayed
ā¢ī This function is not available when āiPodā is selected for
āPreset Equalizerā.
5-3. Car type selection
You can compensate the delay of the sound arrival
time by selecting your environment from the car
types.
ī Press [SRC] and select a source other than
Standby (āSTANDBYā) using [Control] knob.
Refer to <Source selection> (page 14).
ī Press [Control] knob.
Enters the Function setting mode.
ī Select āAudio Controlā āPro Setupā āCar > >
Typeā using [Control] knob.
For how to use [Control] knob, refer to <3-3. How
to select the item> (page 13).
ī Select a car type using [Control] knob.
Display Car type
āOFFā Not compensating.
āCompactā Compact car
āFull Size Carā Full size car
āWagonā Station wagon
āMinivanā Minivan
āSUVā Sport-utility vehicle
āMinivan (Long)ā Long Minivan
Exiting from the Function setting mode
Press and hold [1 6/ ].
To set the delay time ļnely
ā¢ī You can compensate the distances in more details by using
<5-7. Delay time control> (page 22) function.
English | 21
āTweeterā āFCā[2] Shelving ļlter
1, 1.6, 2.5, , 5, 6.3, 8, 10, 12.5 kHz4
āVolumeā Tweete volume
-8 ,-7, -6, -5, -4, -3, -2, -1, dB0
(Colored text: Factory setting)
[1] Displayed only when āFCā is set to a value other than
āThroughā.
[2] Function of KDC-X998.
ī Select a setting item using [Control] knob.
ī Select a setting value using [Control] knob.
Exiting from the Function setting mode
Press and hold [1 6/ ].
5-6. Listening position setting
You can adjust sound localization according to the
listening position.
ī Press [SRC] and select a source other than
Standby (āSTANDBYā) using [Control] knob.
Refer to <Source selection> (page 14).
ī Press [Control] knob.
Enters the Function setting mode.
ī Select āAudio Controlā āPro Setupā āDTA > >
Settingsā > āPreset Positionā using [Control]
knob.
For how to use [Control] knob, refer to <3-3. How
to select the item> (page 13).
ī Select a listening position using [Control]
knob.
Display Compensation seat
āALLā Not compensating.
āFront Rā Front Right seat
āFront Lā Front Left seat
āFront Allā Front seat
Exiting from the Function setting mode
Press and hold [1 6/ ].
Produktspezifikationen
| Marke: | Kenwood |
| Kategorie: | Autoradio |
| Modell: | KDC-X898 |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Kenwood KDC-X898 benƶtigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Autoradio Kenwood
16 Oktober 2024
22 September 2024
20 September 2024
22 August 2024
21 August 2024
21 August 2024
21 August 2024
21 August 2024
21 August 2024
21 August 2024
Bedienungsanleitung Autoradio
- Autoradio Clatronic
- Autoradio Sanyo
- Autoradio Manta
- Autoradio Medion
- Autoradio Nedis
- Autoradio Philips
- Autoradio SilverCrest
- Autoradio Sony
- Autoradio Tevion
- Autoradio Panasonic
- Autoradio LG
- Autoradio AEG
- Autoradio Maginon
- Autoradio Technaxx
- Autoradio Denver
- Autoradio ECG
- Autoradio MarQuant
- Autoradio Renkforce
- Autoradio Telefunken
- Autoradio Trevi
- Autoradio Blaupunkt
- Autoradio Grundig
- Autoradio Daewoo
- Autoradio Pyle
- Autoradio Telestar
- Autoradio Aiwa
- Autoradio Auna
- Autoradio Caliber
- Autoradio Lenco
- Autoradio Pioneer
- Autoradio JBL
- Autoradio JVC
- Autoradio KrĆ¼ger And Matz
- Autoradio Muse
- Autoradio Vieta
- Autoradio Hifonics
- Autoradio Akai
- Autoradio Dual
- Autoradio Hyundai
- Autoradio MT Logic
- Autoradio Orava
- Autoradio Orion
- Autoradio Skoda
- Autoradio Varta
- Autoradio Elta
- Autoradio Sencor
- Autoradio Biltema
- Autoradio OneConcept
- Autoradio Mercedes-Benz
- Autoradio Boston Acoustics
- Autoradio Harman Kardon
- Autoradio Magnat
- Autoradio XOMAX
- Autoradio Parrot
- Autoradio Smart
- Autoradio Alpine
- Autoradio Ford
- Autoradio Volkswagen
- Autoradio Volvo
- Autoradio Opel
- Autoradio MB Quart
- Autoradio Overmax
- Autoradio Rockford Fosgate
- Autoradio Crunch
- Autoradio Pure
- Autoradio NextBase
- Autoradio Norauto
- Autoradio AXTON
- Autoradio Clarion
- Autoradio Mac Audio
- Autoradio Conceptronic
- Autoradio Scott
- Autoradio Audiovox
- Autoradio Becker
- Autoradio ESX
- Autoradio Zenec
- Autoradio VDO
- Autoradio SPC
- Autoradio Roadstar
- Autoradio TokaĆÆ
- Autoradio Audison
- Autoradio Macrom
- Autoradio Phonocar
- Autoradio Xblitz
- Autoradio Autovision
- Autoradio Boss
- Autoradio Hertz
- Autoradio Renault
- Autoradio Fiat
- Autoradio Kicker
- Autoradio Jensen
- Autoradio DLS
- Autoradio Eclipse
- Autoradio Eltax
- Autoradio Emphaser
- Autoradio Focal
- Autoradio Fusion
- Autoradio Ground Zero
- Autoradio Helix
- Autoradio Impulse
- Autoradio Lanzar
- Autoradio Mtx Audio
- Autoradio Naxa
- Autoradio Revo
- Autoradio Rodek
- Autoradio RTO
- Autoradio Sevic
- Autoradio Sirius
- Autoradio Soundstream
- Autoradio Spectron
- Autoradio Stinger
- Autoradio Tamashi
- Autoradio Toxic
- Autoradio Twister
- Autoradio Ultimate
- Autoradio US Blaster
- Autoradio VDO Dayton
- Autoradio Voxx
- Autoradio VW
- Autoradio Watssound
- Autoradio RetroSound
- Autoradio Kunft
- Autoradio Shuttle
- Autoradio Multilaser
- Autoradio Brigmton
- Autoradio Lark
- Autoradio Majestic
- Autoradio SoundMAX
- Autoradio Scion
- Autoradio Raveland
- Autoradio Planet Audio
- Autoradio Adcom
- Autoradio Sendai
- Autoradio Cartronix
- Autoradio Dension
- Autoradio Mystery
Neueste Bedienungsanleitung fĆ¼r -Kategorien-
1 Dezember 2024
1 Dezember 2024
1 Dezember 2024
1 Dezember 2024
16 Oktober 2024
12 Oktober 2024
12 Oktober 2024
8 Oktober 2024
7 Oktober 2024
7 Oktober 2024