Kenwood KAC-HQR1004 Bedienungsanleitung

Kenwood Empfänger KAC-HQR1004

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Kenwood KAC-HQR1004 (2 Seiten) in der Kategorie Empfänger. Dieser Bedienungsanleitung war für 7 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/2

Warranty Card

Model number & serial number

Dealer & stamp

Purchase date

Name & address of customer

Attention:

This card and receipt (or invoice) are necessary to purchase a new panel in case of

theft or damage.

Dear Customer,

Thank you for purchasing this kenwood product. As mentioned in the pages of this

booklet, our warranty is only valid in the countries listed. If your country is not listed please

contact your retailer for information on warranty procedure, or write to:

JVC KENWOOD Customer Information Center

3-12, Moriyacho, Kanagawa-ku, Yokohama-shi, Kanagawa 221-0022, Japan

Safety precautions

WARNING

To prevent injury or fire, take the following

precautions:

• Mounting and wiring this product requires skills and

experience. For safety’s sake, leave the mounting and

wiring work to professionals.

• When extending the ignition, battery, or ground wires,

make sure to use automotive-grade wires or other wires

with the range of 5 mm (AWG 10) or more to prevent

wire deterioration and damage to the wire coating.

• To prevent a short circuit, never put or leave any metallic

objects (such as coins or metal tools) inside the unit.

• If the unit starts to emit smoke or strange smells, turn

off the power immediately and consult your Kenwood

dealer.

• Do not touch the unit during use because the surface of

the unit becomes hot and may cause burns if touched.

CAUTION

To prevent damage to the machine, take the following

precautions:

• Be sure the unit is connected to a 12V DC power supply

with a negative ground connection.

• Do not open the top or bottom covers of the unit.

• Do not install the unit in a spot exposed to direct

sunlight or excessive heat or humidity. Also avoid places

with too much dust or the possibility of water splashing.

• When replacing a fuse, only use a new one with the

prescribed rating. Using a fuse with the wrong rating

may cause your unit to malfunction.

• To prevent a short circuit when replacing a fuse, first

disconnect the wiring harness.

NOTE

• If you experience problems during installation, consult

your Kenwood dealer.

• If the unit does not seem to be working right, consult

your Kenwood dealer.

Cleaning the unit

If the front panel gets dirty, turn off the power and wipe

the panel with a dry silicon cloth or soft cloth.

CAUTION

Do not wipe the panel with a hard cloth or a cloth

dampened by volatile solvents such as paint thinner and

alcohol. They can scratch the surface of the panel and/or

cause the indicator letters to peel off.

To prevent battery rise

When the unit is used in the ACC ON position without

turning the engine ON, it depletes the battery. Use it after

starting the engine.

Protection function

The protection function is activated in the following

situations:

This unit is equipped with a protection function for

protecting this unit and your speakers from various

accidents or problems that can occur.

When the protection function is triggered, the power

indicator goes off and the amplifier stops operating.

• When a speaker wire may be short-circuited.

• When a speaker output contacts ground.

• When the unit malfunctions and a DC signal is sent to

the speaker output.

• When the internal temperature is high and unit won’t

operate.

Wiring

• Take the battery wire for this unit directly from the

battery. If it's connected to the vehicle’s wiring harness, it

can cause blown fuses etc.

• If a buzzing noise is heard from the speakers when the

engine is running, connect a line noise filter (optional) to

each of the battery wire.

• Do not allow the wire to directly contact the edge of the

iron plate by using Grommets.

• Connect the ground wire to a metal part of the car

chassis that acts as an electrical ground passing

electricity to the battery‘s negative terminal. Do not ⊖

turn the power on if the ground wire is not connected.

• Be sure to install a protective fuse in the power cord

near the battery. The protective fuse should be the same

capacity as the unit’s fuse capacity or somewhat larger.

• For the power cord and ground, use a vehicle type

(fireproof ) power wring cord. (Use a power wiring cord

with the range of 5 mm (AWG 10) or more.)

• When more than one power amplifier are going to be

used, use a power supply wiring wire and protective

fuse of greater current-handling capacity than the total

maximum current drawn by each amplifier.

Speaker selection

• Using speakers with smaller input ratings than the

amplifier’s output power would result in smoke

generation or equipment failure.

• The impedance of the speakers that are going to

be connected should be 2 or greater (for stereo

connections), or 4 or greater (for bridged connections).

When more than one set of speakers are going to

be used, calculate the combined impedance of the

speakers and then connect suitable speakers to the

amplifier.

Combined impedance

KAC-HQR1004

4/3/2 CHANNEL POWER AMPLIFIER

INSTRUCTION MANUAL

4/3/2 声道功率放大器

使用说明书

安全注意事项

警告

为了防止受伤和火灾，请遵守下列注意事项。

• 安装本产品和连接导线需要一定的技能和经验。为了保证安

全，应请专业人员完成安装和连接导线作业。

• 当延长蓄电池导线和接地导线时，请使用车辆用导线或

5mm2（AWG 10）以上的导线，以防止导线劣化和被覆面

的损伤。

• 为了防止短路等事故，请勿将金属物品（硬币，工具等）掉

落在装置中。

• 万一装置冒烟或有异味时，请立即关闭电源，并与建伍经销

商洽谈。

• 在使用中请尽量不要接触装置表面。因为装置在使用中表面

发热会烫伤人体。

注意

为了防止装置发生故障，请遵守下列注意事项，正确操作和

使用。

• 请以负接地线的12V直流电源向本装置供电。

• 请勿打开顶部和底部的盖子。

• 请勿将本装置安装在曝露于直射阳光，高温或高湿，水可

能飞溅的或有灰尘的地方。

• 更换保险丝时，请更换规定容量相同的保险丝，如使用不

同容量的保险丝，可能会造成装置的故障。

• 更换保险丝时，为了防止短路事故，请先拔下电源线束再进

行更换。

注

• 安装有困难时，请与建伍经销商洽谈。

• 如果仍不能恢复正常时，请与建伍经销商洽谈。

装置的保养

如果外表污脏时，请关闭电源，使用干燥的硅布或柔软的布

匹擦拭。

注意

请勿使用硬布或涂料稀释剂，酒精等挥发性溶剂，以免损坏

外表面或将所附指示字符擦掉。

防止蓄电池全部放电

当本机在ACC ON位置使用而不开动发动机时，将消耗蓄电池

的电量。请在开动了发动机之后使用。

保护功能

在以下场合中保护功能被激活

本机装有保护功能，可以保护本机以及扬声器不会受到可能

发生的各种意外事故的损害。

当保护功能被触发时，电源指示灯将熄灭，放大器也停止工

作。

• 当扬声器缆线短路时。

• 当扬声器的输出接地时。

• 当本机出现误动作，有 DC（直流）信号传送到扬声器输出

端时。

• 内部高温不能动作时。

接线

• 请将本机的蓄电池连接线直接与蓄电池连接。如果与汽车

的配线束连接，将产生烧毁保险丝等故障。

• 如果发动机运转时从扬声器中发出噪音，可以在蓄电池的每

根连线上加一个线路噪音滤波器（选购件）。

• 使用保护套，以防缆线直接接触铁板的边缘。

• 将接地线连接到车架的金属部位，车架起到车辆电气接地的

作用，将电流传递到蓄电池的负极⊖。如果接地线没有连

接就不要打开电源开关。

• 应务必在蓄电池附近的电源连接线上设置保险丝。保险丝

的规格应该与本机的保险丝容量相同或者略大。

• 对于电源连接线和接地线，请使用汽车用（防火）电源连接

线。（请使用截面积为5mm2（AWG 10）或者以上的电源

连接线。）

• 当使用多个功率放大器时，电源导线的电流容量及保险丝的

容量要大于各个放大器的使用电流之和的最大值。

扬声器选择

• 使用输入额定值比放大器输出功率小的扬声器将会导致冒烟

或设备故障。

• 所连接的扬声器的阻抗必须为 2 欧姆或更高（立体声连接

时）；或者 4 欧姆或更高（桥接连接）。当使用一组扬声

器时，必须在计算扬声器的总阻抗之后，再连接合适的扬

声器。

＜例＞

综合阻抗

Troubleshooting guide

What might appear to be a malfunction in your unit may just be the result of slight misoperation or miswiring.

Before calling service, first check the following table for possible problems.

PROBLEM POSSIBLE CAUSE SOLUTION

No sound.

(No sound from one

side.)

(Blown fuse.)

• Input (or output) cables are disconnected.

• Protection circuit may be activated.

• Volume is too high.

• The speaker cord is shorted.

• Connect the input (or output) cables.

• Check connections by referring to

<Protection function>.

• Replace the fuse and use lower volume.

• After check the speaker cord and fixing the

cause of the short, replace the fuse.

The output level is too

small (or too large).

• The input sensitivity adjusting control is

not set to the correct position. • Adjust the control correctly referring to

<Controls>.

The sound quality is

bad.

(The sound is distorted.)

• The speakers wire are connected with

wrong polarity.⊕ / ⊖

• A speaker wire is pinched by a screw in

the car body.

• The switches may be set improperly.

• Connect them properly checking the ⊕ / ⊖

of the terminals and wires well.

• Connect the speaker wire again so that it is

not pinched by anything.

• Set switches properly by referring to

<Controls>.

故障检修

有时被认为是故障的现象，其实是因微小的操作或配线失误而造成。在要求维修之前，请参照下表稍做检查为盼。

现象原因排除方法

没有声音

（保险丝跳断）

· 输入（或输出）缆线未连接。

· 保护线路可能被触发。

· 音量过大。

· 扬声器电线短路。

· 连接输入（或输出）缆线。

· 参考 <保护功能> 一节，检查连接状况。

· 请更换保险丝，减小音量。

确认扬声器线，解除短路原因后，更换保险丝。

输出电平过低（或过高） · 输入灵敏度调节不当，没有位于妥当位置。 · 调节该控制器。请参考 <控制>。

声音质量很差

（声音失真）

· 扬声器缆线的极性⊕ ⊖ / 连接错误。

· 扬声器缆线的一根被车体螺钉压迫。

· 开关的设定可能不妥。

· 请将缆线的极性⊕ ⊖ / 连接正确。

· 重新连接缆线，使之不再受螺钉压迫。

· 请参考 <控制>，将开关正确设置。

规格

规格可能会变更，恕不另行通知。

音频部

额定输出功率 (+B = 14.4V)

立体声 (4 Ω) ...................................................... 100 W × 4

立体声 (2 Ω) ...................................................... 130 W × 4

桥接连接 (4 Ω) ................................................... 270 W × 2

扬声器阻抗 .............................................4 Ω (2 Ω - 8 Ω允许)

(桥接连接：4 Ω - 8 Ω允许)

频率响应 (+0, – 3 dB) ...........................................5 Hz - 50 kHz

灵敏度 (RCA)......................................................... 0.2 V

- 5.0 V

信噪比 ............................................................................ 100 dB

输入阻抗 .........................................................................10 kΩ

低通滤波器过滤频率 (-12 dB/oct.) ...........50 Hz – 200 Hz (可变)

高通滤波器过滤频率 (-12 dB/oct.) ...........50 Hz – 200 Hz (可变)

低音增强控制 (40 Hz) (B声道) .................................. 0 / +18 dB

共同

使用电压 ............................................... 14.4 V (允许11 - 16 V)

消耗电流 ............................................................................35 A

安装尺寸（宽×高×深）........................324 × 55 × 187 mm

重量 ................................................................................ 2.6 kg

Specifications

Specifications subject to change without notice.

Audio section

Rated power output (+B = 14.4V)

Stereo (4 )..................................................................................100 W × 4

Stereo (2 )..................................................................................130 W × 4

Bridged (4 ) ..............................................................................270 W × 2

Speaker impedance ...............................4  (2  to 8  allowable)

(Bridged connection: 4  to 8  allowable)

Frequency response (+0, –3 dB)...............................5 Hz – 50 kHz

Input sensitivity (RCA)........................................................... 0.2 V – 5.0 V

Signal to noise ratio...........................................................................100 dB

Input impedance ...................................................................................10 k

Low pass filter frequency (-12 dB/oct.)

.....................................................................50 Hz – 200 Hz (variable)

High pass filter frequency (-12 dB/oct.)

.....................................................................50 Hz – 200 Hz (variable)

Bass Boost Control (40 Hz / B channel) ......................... 0 / +18 dB

General

Operating voltage ................................ 14.4 V (11 – 16 V allowable)

Current consumption ...........................................................................35 A

Dimensions (W × H × D) ...................................324 × 55 × 187 mm

Weight ..........................................................................................................2.6 kg

产品中有害物质的名称及含量

部件名称

有害物质

铅

(Pb) 汞

(Hg) 镉

(Cd) 六价铬

(Cr(VI)) 多溴联苯

(PBB) 多溴二苯醚

(PBDE)

安装基板 × ○ ○ × ○ ○

框架 × ○ ○ × ○ ○

电缆类 ×○○×○○

其他（附件） × ○ ○ × ○ ○

本表格依据 SJ/T 11364 的规定编制。

○：

表示该有害物质在该部件所有均质材料中的含量均在 GB/T26572 规定的限量要求以下。

×：表示该有害物质至少在该部件的某一均质材料中的含量超出 GB/T26572 规定的限量要求。

· 此图标表示了中国《电子信息产品污染控制管理办法》规定的环保使用期限。

只要用户在使用本产品时遵守注意事项中的各项规定，从制造日期开始到此图标标出

的期限为止（环保使用期限）既不会污染环境也不会产生对人体有害的物质。

· 附件和消耗性零件的环保使用期限如下所示:

（不同产品中包含的附件和消耗性零件也不相同。）

电缆类、遥控器、麦克风、天线、蓝牙适配器：10 年

环保使用期限

The warranty will only be honored in the country in which the unit was originally purchased.

EXPRESS WARRANTY STATEMENT FOR CAR STEREO AND

PERSONAL AUDIO COMPONENTS

JVCKENWOOD AUSTRALIA PTY. LTD. (“JVCKENWOOD”) is proud of the quality and workmanship of its audio equipment.

This unit has been properly designed, tested and inspected before it was shipped to you. If properly installed and operated in

accordance with instructions furnished, it should give optimum reliable performance.

For Australian Customers

Our goods comes with guarantees that cannot be excluded under the Australian Consumer Law. Under Australian Consumer

Law, you are entitled to a replacement or refund for a major failure and for compensation for any other reasonably foreseeable

loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the

failure does not amount to a major failure.

The beneﬁts of this warranty are in addition to any rights and remedies imposed by Australian State and Federal legislation

that cannot be excluded. Nothing in this warranty is to be interpreted as excluding, restricting or modifying any State or Federal

legislation applicable to the supply of goods and services which cannot be excluded, restricted or modiﬁed.

For New Zealand Customers

The beneﬁts of the express warranty described below are in addition to your statutory rights and remedies under the Consumer

Guarantees Act 1993 that cannot be excluded. If you are acquiring Product for the purposes of a business, to the extent

permitted by law, the Consumer Guarantees Act 1993 does not apply. Otherwise nothing in this warranty is to be interpreted as

excluding, or restricting, the Consumer Guarantees Act 1993. To the extent permitted by law, all other warranties, guarantees

or representations (whether implied by statute, common law or custom of the trade or otherwise) in respect of the Product, not

expressly included in this warranty, are excluded.

SCOPE OF EXPRESS WARRANTY

Subject to the “EXCLUSIONS”, “PROCEDURE WHEN REQUESTING SERVICE UNDER THE EXPRESS WARRANTY” and

“LIMITATIONS” below, each of the KENWOOD brand products (“Products”) is expressly warranted under normal installation

and use against defects in material and workmanship during the Warranty Period.

This warranty is not transferable to a subsequent customer if the Product is sold by the original purchaser during the Warranty Period.

During the Warranty Period, JVCKENWOOD will cause the Product or the defective part of the Product to be repaired by providing

to anyJVCKENWOOD Authorized Service Centre in Australia or New Zealand(as applicable to country of purchase) free of charge

parts necessary to correct any defect in material or workmanship. JVCKENWOOD reserves the right to replace defective parts of

the Product with parts and components of similar quality, grade and composition where an identical part or component is not

available. Products presented for repair may be replaced by refurbished products of the same type rather than being repaired.

Refurbished parts may be used to repair the goods.

WARRANTY PERIOD

The KENWOOD brand car stereo is expressly warranted for a period of from the date of the original purchase.ONE YEAR

CONDITIONS OF THE EXPRESS WARRANTY

The following are not covered by this express warranty:

1. Voltage conversions;

2. Cabinets, grilles, other exterior ﬁnishes, belts, tape heads, and other nondurable parts and accessories;

3. Any fault caused by faulty installation, water damage, the vehicle (including its electronically system) or connection to an incorrect

power supply;

4. Periodic check-ups which do not disclose any defects covered by this warranty;

5. Products on which the serial number has been defected, modiﬁed or removed;

6. Products that have been subject to abnormal conditions, including environment, temperature, water, ﬁre, humidity, pressure, stress

or similar;

7. Alleged defects that are within acceptable industry variances;

8. Damage or deterioration:

a. Resulting from installation and/or removal of the product.

b. Resulting from accident, misuse, abuse, neglect, unauthorized product modiﬁcation or failure to follow instructions contained

in the Owner’s Manual.

c. Resulting from installation of parts or accessories that do not conform to the quality or speciﬁcations of the original parts or

accessories.

d. Occurring during shipment (claims must be present to shipper); and

9. Damaged magnetic tapes.

The warranty does not extend to:

1. Installation and removal charges; or

2. Shipping charges to or from an authorised JVCKENWOOD Service Centre.

PROCEDURE WHEN REQUESTING SERVICE UNDER THE WARRANTY

1. When requesting service under JVCKENWOOD warranty, preferably make your Product available for inspection and testing to the

dealer from whom you made the purchase, or to the nearest Authorised JVCKENWOOD Service Centre for KENWOOD products,

or ship your Product in its original packaging, or equivalent, with shipping charges and insurance prepaid, to the Authorised

JVCKENWOOD Service Centre for KENWOOD products. Otherwise, contact JVCKENWOOD at the contact address listed below.

. Attach the following to the Product:

. the warranty record in the back of this page together;

. a valid purchase docket attached; and

. detailed description of the problem encountered, including details of any problems which relate to associated equipment.

If such inspection and testing ﬁnd no defect in the Product, the purchaser, at JVCKENWOOD’s discretion must pay JVCKENWOOD’s cost

of service work, evaluation and testing.

3. Make sure you recover this card, your purchase docket and repair docket when accepting the equipment back after repair or after

your claim is rejected.

IMPORTANT NOTICE

1. Proper maintenance and use are important to the performance level of all KENWOOD brand products. Therefore, you should read

your instruction manual.

2. Retain your purchase docket together with this warranty record in a safe place, and present them both to prove your eligibility for

warranty service.

3. We recommend that you keep all the original packaging as it provide the best protection you can have for transportation of your

equipment in the future.

4. Location of nearest JVCKENWOOD Service Centre can be obtained from the dealer.

LIMITATIONS

To the extent permitted by law, JVCKENWOOD makes no express warranties or representations other than set out in this warranty.

The repair or replacement of the unit or part of the unit is the absolute limits of JVCKENWOOD’s liability under this express warranty.

JVCKENWOOD AUSTRALIA PTY. LTD.

4 TALAVERA ROAD, NORTH RYDE

N.S.W. 2113, AUSTRALIA

TEL. (02) 8879-2211

FAX. (02) 8879-2255

svcdept@jvckenwood.com.au

AUSTRALIA/NEW ZEALAND JVCKENWOOD AUSTRALIA PTY. LTD.

For Turkey

Bu ürün 28300 sayılı Resmi Gazete’de yayımlanan Atik Elektrikli ve

Elektronik Eşyalarin Kontrolü Yönetmeliğe uygun olarak üretilmiştir.

Eski Elektrik ve Elektronik Ekipmanların İmha Edilmesi Hak-

kında Bilgi (ayrı atık toplama sistemlerini kullanan ülkeleri

için uygulanabilir)

Sembollü (üzerinde çarpı işareti olan çöp kutusu)

ürünler ev atıkları olarak atılamaz.

Eski elektrik ve elektronik ekipmanlar, bu ürünleri

ve ürün atıklarını geri dönüştürebilecek bir tesiste

değerlendirilmelidir. Yaşadığınız bölgeye en yakın geri

dönüşüm tesisinin yerini öğrenmek için yerel makam-

lara müracaat edin. Uygun geri dönüşüm ve atık imha

yöntemi sağlığımız ve çevremiz üzerindeki zararlı etkileri önlerken

kaynakların korunmasına da yardımcı olacaktır.

Produktspezifikationen

Marke:	Kenwood
Kategorie:	Empfänger
Modell:	KAC-HQR1004

Brauchst du Hilfe?

Wenn Sie Hilfe mit Kenwood KAC-HQR1004 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten

Ihren Namen*

Deine E-Mail*

Schreiben Sie hier Ihre Frage

Bedienungsanleitung Empfänger Kenwood

Kenwood Excelon X502-1 Bedienungsanleitung

29 September 2024

Kenwood Excelon XR1001-1 Bedienungsanleitung

10 September 2024

Kenwood Excelon X802-5 Bedienungsanleitung

31 August 2024

Kenwood KRF-V7020 Bedienungsanleitung

26 August 2024

Kenwood DDX9020DABS Bedienungsanleitung

25 August 2024

Kenwood DMX129BT Bedienungsanleitung

24 August 2024

Kenwood XM160-2-98 Bedienungsanleitung

21 August 2024

Kenwood KMR-D358 Bedienungsanleitung

20 August 2024

Kenwood KDC-BT562U Bedienungsanleitung

19 August 2024

Kenwood KDC-358U Bedienungsanleitung

18 August 2024

Bedienungsanleitung Empfänger

Neueste Bedienungsanleitung für -Kategorien-

Rotel RA‑1592MKII Bedienungsanleitung

16 Oktober 2024

Denon AVR-S900W Bedienungsanleitung

16 Oktober 2024

Pro-Ject Amp Box DS2 Bedienungsanleitung

15 Oktober 2024

AKG HP12U Bedienungsanleitung

15 Oktober 2024

Sennheiser EM 9046 SU Bedienungsanleitung

14 Oktober 2024

Yamaha MusicCast RX-V481 Bedienungsanleitung

14 Oktober 2024

JL Audio VX600/6i Bedienungsanleitung

12 Oktober 2024

Pioneer SX-303RDS Bedienungsanleitung

10 Oktober 2024

Technics SA-160L Bedienungsanleitung

8 Oktober 2024

Avantree Audiplex Bedienungsanleitung

7 Oktober 2024