Kelvinator JS4BD018KB Bedienungsanleitung

Kelvinator Klimaanlage JS4BD018KB

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Kelvinator JS4BD018KB (20 Seiten) in der Kategorie Klimaanlage. Dieser Bedienungsanleitung war für 19 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/20

SPLIT SYSTEM AIR CONDITIONER

INSTALLATION INSTRUCTIONS

IMPORTANT SAFETY INFORMATION 2 .................

AIR CONDITIONER INSTALLATION 3 ....................

General Information 3 ..............................................

Before You Install this Unit 3 .....................................

Locating the Air conditioner...................................3

Packaging Removal 3 ..............................................

Ground Level 3 .........................................................

Roof Mount............................................................3

Connecting Refrigerant Tubing between the

Indoor & Outdoor Unit 4 ...........................................

ELECTRICAL WIRING ........................................... 4

Pre - Electrical Checklist 4 .......................................

Line Voltage ........................................................... 4

Comfort AlertTM Diagnostics Module 5 .....................

24VAC Power Wiring ........................................... 5

Thermostat Demand Wiring ................................ 5

Interpreting the Diagnostic LED’s 5 .......................

LED Description 6 ..................................................

Grounding 6 .............................................................

Thermostat Low / Voltage Connections 6 .................

AIR CONDITIONER MAINTENANCE 6 ....................

STARTUP & ADJUSTMENTS 7 ...............................

Pre - Start Checklist 7 ..............................................

Start-up Procedures 7 ..............................................

Air Circulation - Indoor Blower 7 ..............................

System Cooling 7 .....................................................

System Heating 7 .....................................................

DO NOT DESTROY. PLEASE READ CAREFULLY & KEEP IN A SAFE PLACE FOR FUTURE REFERENCE.

IMPORTANT

ATTENTION INSTALLERS:

It is your responsibility to know this product better than your customer. This includes

being able to install the product according to strict safety guidelines and instructing

the customer on how to operate and maintain the equipment for the life of the product.

Safety should always be the deciding factor when installing this product and using

common sense plays an important role as well. Pay attention to all safety warnings and

any other special notes highlighted in the manual. Improper installation of the furnace

or failure to follow safety warnings could result in serious injury, death, or property

damage.

These instructions are primarily intended to assist qualiﬁed individuals experienced in

the proper installation of this appliance. Some local codes require licensed installation/

service personnel for this type of equipment. Please read all instructions carefully

before starting the installation. Return these instructions to the customer’s package

for future reference.

S4BD SERIES - 018, 024, 030, 036, 042, 048, & 060 (1.5, 2, 2.5, 3, 3.5, 4, & 5 Ton)

13 SEER, SINGLE PHASE MODELS

Refrigerant Charging 7 .............................................

Charging the Unit in AC Mode with

Outdoor Temperatures Above 55° F 8 ......................

Application Notes for Using Charging Charts 8 .......

S4BD CHARGING CHARTS 8 .................................

Figure 3. Charging Chart for 1.5 Ton Units 8 ..........

Figure 4. Charging Chart for 2 Ton Units 9 .............

Figure 5. Charging Chart for 2.5 Ton Units 9 ..........

Figure 6. Charging Chart for 3 Ton Units 10 ...........

Figure 7. Charging Chart for 3.5 Ton Units 10 ........

Figure 8. Charging Chart for 4 Ton Units 11 ...........

Figure 9. Charging Chart for 5 Ton Units 11 ...........

S4BD CHARGING TABLES ................................. 12

Table 3. Charging Table for 1.5 Ton Units 12 ..........

Table 4. Charging Table for 2 Ton Units 12 .............

Table 5. Charging Table for 2.5 Ton Units 13 ..........

Table 6. Charging Table for 3 Ton Units 13 .............

Table 7. Charging Table for 3.5 Ton Units 14 ..........

Table 8. Charging Table for 4 Ton Units 14 .............

Table 9. Charging Table for 5 Ton Units 15 .............

ELECTRICAL DIAGRAMS & TABLES 16 ................

Figure 10. W.D., Single Phase (1.5 - 5 Ton) 16 ......

Table 10. Comfort Alert LED Diagnostics 17 ..........

Table 11. Module Wiring Troubleshooting 18 ..........

INSTALL. / PERFORMANCE CHECKLIST 20 .........

REPLACEMENT PARTS 20 ......................................

WARNING:

The information listed below must be followed

during the installation, service, and operation

of this unit. Unqualiﬁed individuals should

not attempt to interpret these instructions or

install this equipment. Failure to follow safety

recommendations could result in possible

damage to the equipment, serious personal

injury or death.

• The installer must comply with all local codes and

regulations which govern the installation of this type

of equipment. Local codes and regulations take

precedence over any recommendations contained in

these instructions. Consult local building codes and

the National Electrical Code (ANSI CI) for special

installation requirements.

• Allelectricalwiringmustbecompletedinaccordance

with local, state and national codes and regulations

and with the National Electric Code (ANSI/NFPA 70)

or in Canada the Canadian Electric Code Part 1 CSA

C.22.1.

• Thisequipmentcontainsliquidandgaseousrefrigerant

under high pressure. DO NOT USE ANY PORTION OF

THE CHARGE FOR PURGING OR LEAK TESTING.

Installation or servicing should only be performed by

qualiﬁed trained personnel thoroughly familiar with this

type equipment.

• Fullyannealed,refrigerantgradecoppertubingshould

be used when installing the system. Refrigerant suction

line tubing should be fully insulated.

• Installation of equipment may require brazing

operations. Installer must comply with safety codes

and wear appropriate safety equipment (safety glasses,

work gloves, ﬁre extinguisher, etc.) when performing

brazingoperations.

• Followallprecautionsintheliterature,ontags,and

on labels provided with the equipment. Read and

thoroughly understand the instructions provided with

the equipment prior to performing the installation and

operational checkout of the equipment.

• Refrigerantandelectricallineshouldberoutedthrough

suitably waterproofed openings to prevent water from

leaking into the structure.

IMPORTANT SAFETY INFORMATION

INSTALLER: Please read all instructions before servicing

this equipment. Pay attention to all safety warnings and

any other special notes highlighted in the manual. Safety

markings are used frequently throughout this manual to

designate a degree or level of seriousness and should

not be ignored.

WARNING indicates a potentially hazardous situation

that if not avoided, could result in personal injury or death.

CAUTIONindicatesapotentiallyhazardoussituationthat

if not avoided, may result in minor or moderate injury or

property damage.

WARNING:

Shut o all electrical power to the unit before

performing any maintenance or service on the

system. Failure to comply may result in personal

injury or death.

WARNING:

Unless noted otherwise in these instructions,

only factory authorized parts or accessory

kits may be used with this product. Improper

installation, service, adjustment, or maintenance

may cause explosion, ﬁre, electrical shock or

other hazardous conditions which may result

in personal injury or property damage

WARNING:

S4BD Split System Air Conditioners are shipped

charged with R410A refrigerant and ready

for installation. If repairs make it necessary

for evacuation and charging, it should only

be attempted by qualiﬁed trained personnel

thoroughly familiar with this equipment. Under

no circumstances should the owner attempt to

install and/or service this equipment. Failure to

comply with this warning could result in property

damage, personal injury, or death.

CAUTION:

This unit uses refrigerant R-410A. DO NOT use

any other refrigerant in this unit. Use of another

refrigerant will damage the unit.

AIR CONDITIONER INSTALLATION

General Information

The S4BD series air conditioner is designed only for

outdoor rooftop or ground level installations. This unit has

been tested for capacity and efﬁciency in accordance

with AHRI Standards and will provide many years of safe

and dependable comfort, providing it is properly installed

and maintained. Abuse, improper use, and/or improper

maintenance can shorten the life of the appliance and

createunsafehazards.

Toachieveoptimumperformanceandminimizeequipment

failure, it is recommended that periodic maintenance be

performed on this unit. The ability to properly perform

maintenance on this equipment requires certain

mechanical skills and tools.

Before You Install this Unit

√ The cooling load of the area to be conditioned must be

calculated and a system of the proper capacity selected.

It is recommended that the area to be conditioned be

completely insulated and vapor sealed.

√ Check the electrical supply and verify the power supply

is adequate for unit operation. The system must be wired

and provided with circuit protection in accordance with

local building codes. If there is any question concerning

the power supply, contact the local power company.

√ The indoor section (air handler, furnace, etc) should be

installed before routing the refrigerant tubing. Refer to

the indoor unit's installation instructions for installation

details.

√ All units are securely packed at the time of shipment and

upon arrival should be carefully inspected for damage

prior to installing the equipment at the job site. Verify

coil ﬁns are straight. If necessary, comb ﬁns to remove

ﬂattened or bent ﬁns. Claims for damage (apparent or

concealed) should be ﬁled immediately with the carrier.

√ Please consult your dealer for maintenance information

and availability of maintenance contracts. Please read

all instructions before installing the unit.

Locating the Air Conditioner

• Surveythejobsitetodeterminethebestlocationfor

mounting the outdoor unit.

• The outdoorunitshouldbe installednocloserthan

18 inches from the outside walls of the facility and in

an area free from overhead obstructions to ensure

unrestricted airﬂow through the outdoor unit.

• Sufcientclearanceforunobstructedairowthroughthe

outdoor coil must be maintained in order to achieve rated

performance. See Figure 1 for minimum clearances to

obstructions.

• Overhead obstructions (Figure 1), poorly ventilated

areas, and areas subject to accumulation of debris

should be avoided.

• Considerationshouldbegiventoavailabilityofelectric

power, service access, noise, and shade.

Packaging Removal

NOTE: To prevent damage to the tubing connections,

carefully remove the carton and user’s manual from the

equipment. Discard the shipping carton.

Ground Level

Ground level installations must be located according to

local building codes or ordinances and these requirements:

• Clearancesmustbeinaccordancewiththoseshown

in Figure 1.

• Asuitablemountingpad(Figure1)mustbeprovided

and separate from the building foundation. The pad

must be level and strong enough to support the weight

of the unit. The slab height must be a minimum of 2”

(5 cm) above grade and with adequate drainage.

Roof Mount

• Themethodofmountingshouldbedesignedsothatit

does not overload roof structures or transmit noise to

the interior of the structure. The roof must be structurally

capable of handling the weight of the unit.

• Full perimeter support is required under the unit.

Support must be made of weather resistant materials

and installed prior to unit installation.

• Thesupportmust bebuilttoraisetheunit6"above

the roof.

Figure 1. Clearance Requirements

2” Mounting dPa

24" for

Service Access

12" or 18”

See Note

12" or 18”

See Note

DO NOT

OBSTRUCT

TOP OF UNIT

NOTE: Units require full perimeter clearances.

Installer must maintain 18” between two units

or 12” between single unit and structure.

6” from Building

or Structure

48”

Produktspezifikationen

Marke:	Kelvinator
Kategorie:	Klimaanlage
Modell:	JS4BD018KB

Brauchst du Hilfe?

Wenn Sie Hilfe mit Kelvinator JS4BD018KB benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten

Ihren Namen*

Deine E-Mail*

Schreiben Sie hier Ihre Frage

Bedienungsanleitung Klimaanlage Kelvinator

Kelvinator KSD80HRG Bedienungsanleitung

30 August 2024

Kelvinator KSV80HRF Bedienungsanleitung

30 August 2024

Kelvinator KSD25HWJ Bedienungsanleitung

30 August 2024

Kelvinator KWH39CRF Bedienungsanleitung

30 August 2024

Kelvinator KSD90HRH Bedienungsanleitung

30 August 2024

Kelvinator KSD35HWH Bedienungsanleitung

30 August 2024

Kelvinator KSV70CRE Bedienungsanleitung

30 August 2024

Kelvinator KWH16CMF Bedienungsanleitung

30 August 2024

Kelvinator KSV70HRD Bedienungsanleitung

30 August 2024

Kelvinator JS4BD042KB Bedienungsanleitung

30 August 2024

Bedienungsanleitung Klimaanlage

Neueste Bedienungsanleitung für -Kategorien-

MundoClima MUCSR-H3 Bedienungsanleitung

16 Oktober 2024

Duux DXMA10 North Bedienungsanleitung

16 Oktober 2024

Duux DXAC04 Bedienungsanleitung

16 Oktober 2024

LG HS-H076QPA0 Bedienungsanleitung

16 Oktober 2024

Klarstein Vita Pure 2G Bedienungsanleitung

16 Oktober 2024

Einhell BMK 2400E Bedienungsanleitung

15 Oktober 2024

Qlima P 126 Bedienungsanleitung

15 Oktober 2024

Amana PTC093K35AXXX Bedienungsanleitung

15 Oktober 2024

Amana AMAP121AB-2 Bedienungsanleitung

15 Oktober 2024

Amana PTC173J35AXXX Bedienungsanleitung

15 Oktober 2024