Just Perfecto CA-581S Bedienungsanleitung
Just Perfecto
Blender
CA-581S
Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Just Perfecto CA-581S (20 Seiten) in der Kategorie Blender. Dieser Bedienungsanleitung war für 4 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet
Seite 1/20
Model JL-02
220-240VAC, 50/60Hz, 800W
Instruction Manual
Important Safeguards
When using electrical appliances, basic safety precautions should always be followed,
including the following:
1. Read all instructions before operating.
2. Do not touch hot surfaces. Use handles or knobs.
3. To protect against electrical shock, do not immerse cord, plug or appliance itself in
water or other liquids.
4. This appliance is not intended for use by persons (including children) with reduced
physical sensory or mental capabilities, or lack of experience and knowledge, unless
they have been given supervision or instruction concerning use of the appliance by a
person responsible for their safety. Children should be supervised to ensure that they
do not play with the appliance.
5. Unplug from outlet when not in use and before cleaning. Allow to cool before putting
on or taking off parts.
6. Do not operate any appliance with a damaged cord or plug or after the appliance
malfunctions or has been damaged in any manner. Return the appliance to the nearest
authorized service facility for examination, repair or adjustment.
7. The use of accessory attachments not recommended by the appliance manufacturer
may cause injuries.
8. Do not use outdoors.
9. Do not let cord hang over edge of table or counter or touch hot surfaces.
10. Do not place on or near a hot gas or electric burner, or in a heated oven.
11. Always attach plug to appliance first, then plug cord into wall outlet. To disconnect,
turn any control to OFF position, then remove plug from wall outlet.
12. Oversized foods or metal utensils must not be inserted in the appliance as they may
cause a fire or risk of electrical shock.
13. A fire may occur if the appliance is covered or touching flammable material including
curtains, draperies, walls and the like when in operation.
14. Do not clean with metal scouring pads. Pieces can break off the pad and touch
electrical parts, involving a risk of electrical shock.
15. Extreme caution should be exercised when using containers constructed of other
material other than metal or glass.
16. Do not store any materials other than manufacturers recommended accessories in this
unit when not in use.
17. Do not place any of the following materials inside the unit: Paper, cardboard, plastic
and the like.
PARTS IDENTIFICATION
1) Removable filter cap 5) 6- blade 9) Jar Assembly
2) Lid 6) Cup base
3) 1500ml lass jar 7) Rotary switchg
4) Sealing ring 8) Motor Base
HOW TO USE THE BLENDER
• Fit the to theblender jar blender base.
• Put the liquid ingredients into the Do not fill the jar above the 1500ml mark.blender jar.
• Put the on To add ingredients during operation, the in the center of thelid .
.
.
.. measuring cup
lid can be removed by turning it anticlockwise and then lifting it off. Do not put any objects
into the while the appliance is in use.blender jar
• Insert the plug into power supply and use the to select the desired speed.speed control
• do not operate the blender when the is empty. Do not fill it with dryCaution: blender jar
ingredients only, such as nuts, almonds etc.
• After using the blender, switch off and remove the plug from the power supply. Wait until the
motor has come to a complete stop before removing the To remove theblender jar. blender
jar, blender base.just lift it off from the
• Grab the and from thelid lift it off blender jar.
Produktspezifikationen
Marke: | Just Perfecto |
Kategorie: | Blender |
Modell: | CA-581S |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Just Perfecto CA-581S benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Blender Just Perfecto
21 August 2024
Bedienungsanleitung Blender
- Blender Sinbo
- Blender Clatronic
- Blender Domo
- Blender Emerio
- Blender G3 Ferrari
- Blender Coline
- Blender Tristar
- Blender Medion
- Blender Nedis
- Blender Philips
- Blender SilverCrest
- Blender Hanseatic
- Blender Sunbeam
- Blender Panasonic
- Blender Quigg
- Blender Adler
- Blender Beper
- Blender Bestron
- Blender Camry
- Blender Princess
- Blender Trisa
- Blender Bosch
- Blender AEG
- Blender Ambiano
- Blender Ardes
- Blender Siemens
- Blender Bifinett
- Blender Caso
- Blender Concept
- Blender Electrolux
- Blender Fagor
- Blender Gorenje
- Blender Jata
- Blender Klarstein
- Blender Proficook
- Blender Rommelsbacher
- Blender Severin
- Blender Solis
- Blender Springlane
- Blender Unold
- Blender Gastroback
- Blender H.Koenig
- Blender Hendi
- Blender Korona
- Blender Melissa
- Blender Russell Hobbs
- Blender Steba
- Blender Studio
- Blender Taurus
- Blender Tefal
- Blender Vox
- Blender Day
- Blender ECG
- Blender Mesko
- Blender Telefunken
- Blender Black And Decker
- Blender Amica
- Blender Arzum
- Blender BEKO
- Blender Blaupunkt
- Blender Blokker
- Blender Boretti
- Blender Bourgini
- Blender Brabantia
- Blender Braun
- Blender Cuisinart
- Blender Eldom
- Blender Eta
- Blender Fritel
- Blender Graef
- Blender Grundig
- Blender Heinner
- Blender Hotpoint
- Blender Inventum
- Blender Kenwood
- Blender Kitchen Crew
- Blender KitchenAid
- Blender Koenig
- Blender Krups
- Blender Maestro
- Blender Moulinex
- Blender Sage
- Blender Sharp
- Blender Smeg
- Blender Solac
- Blender Trebs
- Blender Vitamix
- Blender Waring Commercial
- Blender Wilfa
- Blender Witt
- Blender WMF
- Blender Brandt
- Blender GE
- Blender Haier
- Blender Bartscher
- Blender Nordmende
- Blender Svan
- Blender King
- Blender Philco
- Blender Continental Edison
- Blender Hitachi
- Blender Hyundai
- Blender JTC
- Blender Orava
- Blender Orion
- Blender Magimix
- Blender Livoo
- Blender DCG
- Blender Dualit
- Blender Lümme
- Blender Morphy Richards
- Blender Ritter
- Blender Sencor
- Blender Turmix
- Blender Maxwell
- Blender Ariete
- Blender Efbe-Schott
- Blender Kalorik
- Blender Optimum
- Blender Rotel
- Blender Saro
- Blender Scarlett
- Blender Ufesa
- Blender Costway
- Blender Cecotec
- Blender Zephir
- Blender Elba
- Blender MPM
- Blender Thomas
- Blender Imetec
- Blender Logik
- Blender SupportPlus
- Blender Champion
- Blender G21
- Blender Novis
- Blender JML
- Blender Monoprice
- Blender Wolf
- Blender Vivax
- Blender OBH Nordica
- Blender Omega
- Blender Profilo
- Blender Zelmer
- Blender Bamix
- Blender Breville
- Blender George Foreman
- Blender Esperanza
- Blender Kogan
- Blender Innoliving
- Blender Eufy
- Blender RGV
- Blender Vitek
- Blender Aurora
- Blender Sogo
- Blender Gourmetmaxx
- Blender Ninja
- Blender Bellini
- Blender Noveen
- Blender Swan
- Blender AYA
- Blender Hamilton Beach
- Blender Orbegozo
- Blender Izzy
- Blender Saturn
- Blender Baby Brezza
- Blender Duronic
- Blender Dynamic
- Blender Esge
- Blender Espressions
- Blender Homeland
- Blender Juiceman
- Blender Kambrook
- Blender Magic Bullet
- Blender Novamatic
- Blender NutriBullet
- Blender Oster
- Blender Salton
- Blender Santos
- Blender Thane
- Blender Grunkel
- Blender Tower
- Blender Tribest
- Blender Turbotronic
- Blender Usha
- Blender Vitinni
- Blender Weasy
- Blender Xsquo
- Blender Zwilling
- Blender Blendtec
- Blender Beautiful
- Blender WestBend
- Blender Bella
- Blender Nevir
- Blender Girmi
- Blender Chefman
- Blender CRUX
- Blender Globe
- Blender Zeegma
- Blender Dash
- Blender PowerXL
- Blender Flama
- Blender AENO
- Blender Focus Electrics
- Blender Robot Coupe
- Blender Nutrichef
- Blender Bugatti
- Blender Riviera & Bar
- Blender AvaMix
- Blender Khind
- Blender Sam Cook
- Blender JIMMY
- Blender Gallet
- Blender Bar Maid
- Blender Catler
- Blender Haeger
- Blender BioChef
- Blender Semak
- Blender Luvele
- Blender Create
- Blender Brentwood
- Blender Electroline
- Blender Back To Basics
- Blender Comelec
- Blender Nutri Ninja
- Blender Power Air Fryer XL
- Blender Apuro
- Blender Proappliances
- Blender Imarflex
- Blender Mystery
Neueste Bedienungsanleitung für -Kategorien-
4 Oktober 2024
4 Oktober 2024
1 Oktober 2024
1 Oktober 2024
30 September 2024
30 September 2024
30 September 2024
30 September 2024
29 September 2024
27 September 2024