Joy-it SBC-OLED01.3 Bedienungsanleitung

Joy-it Monitor SBC-OLED01.3

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Joy-it SBC-OLED01.3 (10 Seiten) in der Kategorie Monitor. Dieser Bedienungsanleitung war für 4 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/10
1.3" OLED DISPLAY
OLED display with SPI & I2C interface
Joy-IT powered by SIMAC Electronics GmbH - Pascalstr. 8 - 47506 Neukirchen-Vluyn - www.joy-it.net
Dear customer,
thank you for choosing our product. In the following, we will show
you what you should pay attention to during commissioning and use.
Should you encounter any unexpected problems during use, please feel
free to contact us.
The graphical 1.3" OLED display has a resolution of 128x64 pixels
and communicates via the SPI interface. Optionally, the display can
also be soldered to the I2C interface on the back.
The interface of the module can be selected by re-soldering the marked
resistors:
1. GENERAL INFORMATION
2. BASICS & INTERFACES
ATTENTION. The display uses a logic level of 3.3 V. For this reason, a voltage
converter must be used for use with a device that has a logic level voltage of
5 V (e.g. Arduino Uno). In our example we use the COM-KY051VT.
USE VIA THE SPI PROTOCOL:
First, connect the module to your Arduino as follows:
3. APPLICATION EXAMPLE ARDUINO


Produktspezifikationen

Marke: Joy-it
Kategorie: Monitor
Modell: SBC-OLED01.3

Brauchst du Hilfe?

Wenn Sie Hilfe mit Joy-it SBC-OLED01.3 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Monitor Joy-it

Bedienungsanleitung Monitor

Neueste Bedienungsanleitung für -Kategorien-