JL Audio XD1000/5v2 Bedienungsanleitung

JL Audio Empfänger XD1000/5v2

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für JL Audio XD1000/5v2 (45 Seiten) in der Kategorie Empfänger. Dieser Bedienungsanleitung war für 15 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/45

owner’s manual

Remote

Level

Mode

Turn- On

Mode

All | Sub Ch.

Input M ode

2 Ch. | 4 Ch. | 6 Ch.

Rem. | Oset | Signal

Input Vo ltag e

Low | High

CH. 3

(

L)CH. 4

(

CH. 1

(

CH. 1 & 2 CH. 3 & 4 SUB CH.

CH. 2

(

HP Filter Mod e

Filter Freq. (Hz )

Input

Sens.

O | p1-x1 | x10

Filter Mode

HP Filter Freq. ( Hz)

Input

Sens.

O | BP | HP

LP Filter Mo de

LP Filter Freq. (Hz )

Input

Sens.

O | 12dB | 24dB

Mono Sub woof er Ou tpu t

(L )

(R )

CH. 1

CH. 2

CH. 3

CH. 4

SUB

INPUT SE CT ION

+12 VDC Groun d Remote

5 Channel Amp lifie r wit h 2-Way / 3-Way Cro ss ove r

Thank you for purchasing a JL Audio amplifier for

your automotive sound system.

Your amplifier has been designed and manufactured to exacting

standards in order to ensure years of musical enjoyment in your vehicle.

For maximum performance, we highly recommend that you have

your new amplifier installed by an authorized JL Audio dealer. Your

authorized dealer has the training, expertise and installation equipment

to ensure optimum performance from this product. Should you

decide to install the amplifier yourself, please take the time

to read this manual thoroughly so as to familiarize yourself

with its installation requirements and setup procedures.

If you have any questions regarding the instructions in this

manual or any aspect of your amplifier’s operation, please contact your

authorized JL Audio dealer for assistance. If you need further assistance,

please call the JL Audio Technical Support Department

at (954) 443-1100 during business hours.

1000W 5-Channel Amplier with 2-Way / 3-Way Crossover

2 | JL Audio - XD1000/5v2 Owner’s Manual

PROTECT YOUR HEARING!

We value you as a long-term customer. For

that reason, we urge you to practice restraint in

the operation of this product so as not to damage

your hearing and that of others in your vehicle.

Studies have shown that continuous exposure to

high sound pressure levels can lead to permanent

(irreparable) hearing loss. This and all other

high-power amplifiers are capable of producing

such high sound pressure levels when connected

to a speaker system. Please limit your continuous

exposure to high volume levels.

While driving, operate your audio system in

a manner that still allows you to hear necessary

noises to operate your vehicle safely (horns,

sirens, etc.).

SERIAL NUMBER

In the event that your amplifier requires

service or is ever stolen, you will need to have

a record of the product’s serial number. Please

take the time to enter that number in the space

provided below. The serial number can be found

on the bottom panel of the amplifier and on the

amplifier packaging.

Serial Number:

INSTALLATION APPLICATIONS

This amplifier is designed for operation in

vehicles with 12 volt, negative-ground electrical

systems. Use of this product in vehicles with

positive ground and/or voltages other than 12V

may result in damage to the product and will void

the warranty.

This product is not certified or approved for

use in aircraft.

Do not attempt to “bridge” the outputs of this

amplifier with the outputs of a second amplifier,

including an identical one.

PLANNING YOUR INSTALLATION

It is important that you take the time to read

this manual and that you plan out your

installation carefully. The following are some

considerations that you must take into account

when planning your installation.

Cooling Efficiency Considerations:

The outer shell of your JL Audio amplifier is

designed to remove heat from the amplifier

circuitry. For optimum cooling performance, this

outer shell should be exposed to as large a volume

of air as possible. Enclosing the amplifier in a

small, poorly ventilated chamber can lead to

excessive heat build-up and degraded

performance. If an installation calls for an

enclosure around the amplifier, we recommend

that this enclosure be ventilated with the aid

of a fan. In normal applications, fan-cooling

is not necessary.

+12 VDC Ground Remote

5 Channel Amplifier with 2-Way / 3-Way Crossover

Remote Turn-On

Connector

(pg. 6)

Chassis Ground

Connector

(pg. 5)

+12 V Power

Connector

(pg. 5)

4 | JL Audio - XD1000/5v2 Owner’s Manual

ProduCt desCriPtion

The JL Audio XD1000/5v2 is a five-channel,

system amplifier utilizing JL Audio NexD™ ultra-

high speed switching technology for its four main

channels and NexD™ high-speed switching for

its subwoofer channel. The NexD™ technologies

deliver outstanding fidelity and efficiency.

The XD1000/5v2 can be operated with a wide

variety of source units and system configurations.

tYPiCal installation sequenCe

The following represents the sequence

for a typical amplifier installation, using an

aftermarket source unit or OEM Interface

processor (like the CleanSweep CL441dsp).

Additional steps and different procedures may

be required in some applications. If you have

any questions, please contact your authorized

JL Audio dealer for assistance.

1) Disconnect the negative battery post

connection and secure the disconnected cable

to prevent accidental re-connection during

installation. This step is not optional.

2) Run 4 AWG power wire from the battery

location to the amplifier mounting location.

Take care to route the wire in such a way that

it will not be damaged and will not interfere

with vehicle operation. Use 2 AWG or larger

power wire and a power distribution block if

additional amplifiers are being installed with

the XD1000/5v2.

3) Connect power wire to the positive battery

post. Fuse the wire with an appropriate fuse

block (and connectors) within 18 inches (45

cm) wire length of the positive battery post.

This fuse is essential to protect the vehicle.

Do not install the fuse until the power wire

has been securely connected to the amplifier.

4) Run signal cables and remote turn-on wire

from the source unit to the final amplifier

mounting location.

5) Run speaker cables from the speaker systems

to the amplifier mounting location.

6) Find a good, solid metal grounding point

close to the amplifier and connect the

negative power wire to it using appropriate

hardware (use of the JL Audio ECS master

ground lug, XB-MGLU is recommended).

Use 4 AWG wire, no longer than 36 inches

(90 cm) from the amplifier to the ground

connection point. In some vehicles, it may

be necessary to upgrade the battery ground

wire. (See page 5 for important notice).

7) Securely mount the amplifier.

8) Connect the positive and negative power

wires to the amplifier. A fuse near

the amplifier is not necessary if the

XD1000/5v2 is the only device being

run from the fused main power wire. If

the fused main power wire is shared by

the XD1000/5v2 and other amplifiers

or devices, fuse each amplifier/device

within 12 inches (30 cm) of wire length,

via a fused distribution block or multiple

individual fuse blocks/on-board fuses.

9) Connect the remote turn-on wire

to the amplifier.

10) Connect the input cables to the amplifier.

11) Connect the speaker cables to the amplifier.

12) Carefully review the amplifier’s control

settings to make sure that they are set

according to the needs of the system.

13) Install the power wire fuse(s) (80A for a

single XD1000/5v2) and reconnect the

negative battery post terminal.

14) Turn on the source unit at a low level

to double-check that the amplifier is

configured correctly. Resist the temptation

to crank it up until you have verified the

control settings.

15) Make necessary adjustments to the input

sensitivity controls to obtain the right

overall output and the desired balance

in the system. See Appendix A (page 14)

for the recommended input sensitivity

setting method.

16) Enjoy the fruits of your labor with your

favorite music.

Produktspezifikationen

Marke:	JL Audio
Kategorie:	Empfänger
Modell:	XD1000/5v2
Breite:	374 mm
Tiefe:	180 mm
Produktfarbe:	Schwarz, Silber
Höhe:	52 mm
Hochpassfilter:	Ja
Verstärkerklasse:	D
Anzahl der Verstärkerkanäle:	5 Kanäle
Maximale Ausgangsleistung (RMS):	1000 W