Jensen JPORT Bedienungsanleitung


Lies die bedienungsanleitung für Jensen JPORT (1 Seiten) kostenlos online; sie gehört zur Kategorie Nicht kategorisiert. Dieses Handbuch wurde von 14 Personen als hilfreich bewertet und erhielt im Schnitt 5.0 Sterne aus 7.5 Bewertungen. Hast du eine Frage zu Jensen JPORT oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

Seite 1/1
JPORT Installation Instructions
Existing Radio
(Not Included)
1. Choose a mounting location on the dashboard that will allow enough room
behind the dash to run the JPORT cables to the existing car radio.
2. Drill a 3/4" hole in the dashboard.
3. Remove the hexagonal nut from the JPOR T.
4. Insert the RCA cable ends through the hole in the dashboard from the front.
5. Replace hexagonal nut on the back side of the dashboard
and secure the JPORT to the dashboard.
6. Plug the RCA cables into the RCA-IN jacks on your existing car radio.
7. Plug a device with a 3.5 mm jack into the JPORT to test the connections.
8. Replace the dashboard components.
Radio's
Auxilliary Input
JPORT
White Washer
Hexagonal Nut
Dashboard
3.5 mm Jack MP3 Player
(Not Included)
4 - Foot Cable with 3.5mm Male Jacks (Included)
Made in China/Printed in China
3/4 Inch
Recommended Size
for Mounting Hole


Produktspezifikationen

Marke: Jensen
Kategorie: Nicht kategorisiert
Modell: JPORT

Brauchst du Hilfe?

Wenn Sie Hilfe mit Jensen JPORT benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten