JBL VPSB7118DPDA Bedienungsanleitung

JBL Lautsprecher VPSB7118DPDA

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für JBL VPSB7118DPDA (4 Seiten) in der Kategorie Lautsprecher. Dieser Bedienungsanleitung war für 31 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF
Seite 1/4
Key Features:
Powered 18" Sub-woofer
Loudspeaker System with JBL
DrivePack®technology for portable
or installed use
3600 watts peak power, 1800 watts
continuous
18-inch Differential Drive®
low-frequency driver for extended
low-frequency output
Stylized and ergonomically designed
powder-coated die-cast aluminum
handles
Eight 3-inch fly track suspension
points and twenty-four M10 fittings
(optional detachable flying fittings
and forged eye bolt kits available)
Optional DPAN or DPCN
(CobraNet™) digital audio input
modules available for HiQnet™
network control
Applications:
High-impact audio/visual
presentations
Theatrical sound design
Houses of Worship
Sound reinforcement rental companies
Live performance venues
Performing arts centers
Corporate learning centers
Themed entertainment venues
The VPSB7118DP is a powered 18"
integrated sub-woofer loudspeaker
system featuring 3600 watts of peak
output power, 1800 watts continuous,
and onboard digital signal processing.
Designed in cooperation with Crown
International, the JBL DrivePack®
DP-1 features leading-edge
technology such as patented high
efficiency Class-I power amplifier
technology. Network control and
monitoring is optionally available via
System Architect software.
The VPSB7118DP transducer is
JBL’s 2268G 18" diameter Differential
Drive®woofer.
Specifications:
Frequency Response (+/-3 dB): 39 Hz - 145 Hz
Frequency Range (-10 dB): 29 Hz - 165 Hz
Maximum Peak Output1: 129 dB SPL 1m
Transducer Section:
Low Frequency Section: JBL 2268G, 457 mm (18 in) dia., 76 mm (3 in) Dual Coil,
Differential Drive®, Direct Cooled
Bandpass Nominal Impedance: 4 ohms
System:
DP1 Internal Amplification Output
(at nominal load): 3600 Watts Peak, 1800 Watts Continuous
DP1 Output Section: 1-Channel, Class I
Audio Input connector: XLR with loop-through
Network control connector: Ethernet, RJ45 (DPAN, DPCN options)
Signal Processing: DSP based, resident in Input Module. See page 2 For
input module specifications.
System Management: DSP based limiters for mechanical and thermal
protection
AC Power Operating Range: Auto Select 90-132VAC/216-264VAC, 50/60 Hz
AC Line Voltage: 50/60 Hz, Auto-Detect; 120V/240V (-15%, +10%)
AC Input Connector: Neutrik PowerCon (NAC 3MPA)
AC Loop-thru: Neutrik PowerCon (NAC 3MPB)
AC Current Requirement: 6A per system at 120V, 3A per system at 240V
Enclosure:
Box Construction: 5/8 in. multi-ply exterior grade Baltic birch. Internally
braced. Black DuraFlex™ finish.
Suspension System: 8 standard air-cargo 3 in. track and 24 M10 fittings.
Grille: 14 Gauge Black powder-coated perforated steel with
foam backing.
Dimensions (H x W x D): 514.4 x 701.8 x 812.8 mm
20.25 x 27.63 x 32 in.
Net Weight: 54 kg (129 lb)
1Measured with IEC shaped noise in free field conditions.
Powered 18"
Integrated
Subwoofer System
VPSB7118DP
VPSP7118DP-AN (Optional network input module)
VPSB7118DP-CN (Optional input module with digital audio)
VPSB7118DP Powered 18" Integrated Subwoofer System
Input module characteristics and options
Features
Description DPIP DPAN DPCN
(standard input module) (optional HiQnet network (optional HiQnet network
input module) input module) input module; digital audio)
HiQNet Compliant No Yes Yes
Network Communication No 100MB Ethernet 100MB Ethernet
Network Connections N/A RJ-45, CAT5 RJ-45, CAT5
Audio signal format Analog Analog Digital with analog backup
CobraNet™ digital audio over ethernet No No Yes
Level Controls Attenuator, 16dB range Network Controllable Network Controllable
Remote Load Monitoring No Yes Yes
User Assignable Filters No 16 16
User Accessible Delays No Yes Yes
Noise Generator No Pink, White Pink, White
Sine Wave Generator No Continous, Burst Continuous, Burst
User Assignable Filter Types None 9 9
Error Reporting No Yes, via software Yes, via software
Digital Speaker Setting Presets 2, fixed 10, user assignable 10, user assignable
Polarity Reverse No Yes, via software Yes, via software
Listen Bus line level remote monitor No No Yes
Firmware upgrades via network No Yes Yes
Mute No Remote via network Remote via Network
JBL DrivePack®Software Control Panel
With optional HiQnet-compatible input modules installed, JBL
DrivePack systems can be remotely controlled and monitored
using HiQnet System Architect™ software. A Windows-based
application, it provides an intuitive, unified platform for system
configuration and operation of JBL DrivePack-equipped systems
and any other HiQnet-compliant audio devices in the signal
chain. HiQnet System Architect enables the unified layout of on-
screen product control surfaces, and simple preset configuration
of an entire system across multiple brands and product classes.
Advanced remote control and diagnostic capabilities, custom
control panel creation, and the recall of presets on all connected
HiQnet devices are included. In addition, the application
enables a user to copy / paste like parameter values from, and
to, multiple products across the HiQnet network.
HiQnet System Architect is available for download at
harmanpro.com.
Specifications
Analog Audio Input Connectors XLR, female XLR, female XLR, female
Input Type Electronically Balanced, RF Filtered
Signal Loop-through XLR, male, passive pass-through
Input Impedance 20K Ohms Bal 20K Ohms Bal 20K Ohms Bal
Polarity (+) voltage on XLR pin 2 yields (+) LF pressure
Input Sensitivity at 1m 0 dBu: 116 dB spl 0 dBu: 116 dB spl 0 dBu: 116 dB spl
0 dBV: 114 dB spl 0 dBV: 114 dB spl 0 dBV: 114 dB spl
(Input attenuator set at 0 dB) (Internal sensitivity set to +4dBu) (Internal sensitivity set to +4 dBu)
Max Input Level +23 dBu
Frequency Response 20 Hz – 20K Hz ± 0.5 dB
DSP Processing dbx Type IV analog-to- 24 Bit conversion, 32 bit 24 Bit conversion, 32 bit
digital conversion circuitry floating point processing floating point processing
Dynamic Range (20-20 KHz) > 107 dB (A Weighted) > 110 dB (A Weighted) > 110 dB (A Weighted)
THD+N (20-20 KHz), rated power < 0.5%
Crosstalk > 60 dB @ 1kHz
User Programmable Signal Delay N/A 2 seconds 2 seconds
Front Panel Controls Gain, Sub Filter Enable Enable ALT Preset Enable ALT Preset
Front Panel Indicators Signal/clip, ready, thermal, Signal/clip, ready, thermal, Signal/clip, ready, thermal,
fault, sub filter on/off fault, alt. preset select, fault, alt. preset select,
Network: activity, link Network: acivity, link,
CobraNet conductor
DPIP (Standard dbx Input Module)
JBL DrivePacks are equipped with a modular input bay and are available in several
versions. The standard DPIP input module features analog audio inputs and
sophisticated onboard digital signal processing technology. Precision bandpass
limiting, pre-equalization filters and automatic self-test functions ensure optimized
performance. Front panel controls include a 32-position detented rotary attenuator
calibrated in 0.5 dB steps which provides a 16 dB range of control. This can be
useful for setting up downfill shading or overall system gain structuring. Another
feature is the “Enable Subwoofer Filter” button. This is a momentary-contact type
switch which enables or disables the selected function. On subwoofer applications,
the low-pass frequency is set to 80 Hz. For full-range systems used with subwoofers,
the high-pass is raised to 80 Hz.
DPAN (Optional HiQnet Network Input Module with Analog Audio)
In addition to all of the features included on the standard input module, the DPAN
adds 100 Mb Ethernet networking functionality and HiQnet compatability. It enables
remote control and monitoring via HiQnet System Architect™ software. Network
Control and Monitoring is enabled by the JBL DP-SCP (DrivePack Software Control
Panel) supplied within HiQnet System Architect. Network capabilities include
monitoring of status, input and output levels, clipping, temperature, load faults and
gain reduction. Additional control features available in software include load
supervision, dynamic processing, ten internal pre-e.q.filter presets, delays, onboard
noise and sine-wave generators, network device event logging, and user alert
messaging.
DPCN (Optional HiQnet Network Input Module with Digital Audio)
In addition to all of the features included on the DPAN, the DPCN input module adds
CobraNet™ to the mix and offers the ability to direct up to 64 audio channels on one
network, with digital audio and remote control and monitoring via Ethernet combined
on a single cable. DPCN includes the option to use an analog input as a backup
audio source providing you complete reliability and flexibility to cover any situation.
With HiQnet System Architect providing the software user interface, the HiQnet
communications protocol provides remote access to digital speaker preset files in the
JBL DrivePack. As with the DPAN, user-addressable features include ten internal pre-
e.q. filter presets, up to 2 seconds of delay per channel, onboard noise and sine-wave
generators, network device event logging, and user alert messaging.
JBL DrivePack input modules are used to implement crossovers, equalization, time alignment, and
protection for the attached speaker system. Speaker-dependent settings are not user-configurable
from any version of the input module. The following options are available for connectivity, audio
signal path and control functionality.

Produktspezifikationen

Marke: JBL
Kategorie: Lautsprecher
Modell: VPSB7118DPDA

Brauchst du Hilfe?

Wenn Sie Hilfe mit JBL VPSB7118DPDA benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten


Bedienungsanleitung Lautsprecher JBL

JBL

JBL CS 360Xcite Bedienungsanleitung

6 Oktober 2024
JBL

JBL AM7215/95 Bedienungsanleitung

5 Oktober 2024
JBL

JBL Club 620F Bedienungsanleitung

4 Oktober 2024
JBL

JBL Stadium MB8030AM Bedienungsanleitung

3 Oktober 2024
JBL

JBL Control 24C Micro Bedienungsanleitung

2 Oktober 2024
JBL

JBL Arena 26Be Bedienungsanleitung

2 Oktober 2024
JBL

JBL Control 28T-60 Bedienungsanleitung

24 September 2024
JBL

JBL AM7215/26 Bedienungsanleitung

23 September 2024
JBL

JBL EON One Pro Bedienungsanleitung

16 September 2024
JBL

JBL SRX738F Bedienungsanleitung

16 September 2024

Bedienungsanleitung Lautsprecher

Neueste Bedienungsanleitung für -Kategorien-

Sonance

Sonance Visual Performance VP65 SST Bedienungsanleitung

16 Oktober 2024
Bowers And Wilkins

Bowers And Wilkins CWM664 Bedienungsanleitung

16 Oktober 2024
Focal

Focal Chorus 826 V Bedienungsanleitung

16 Oktober 2024
KEF

KEF Ci200ER Bedienungsanleitung

16 Oktober 2024
Steren

Steren SPK-1100BL Bedienungsanleitung

16 Oktober 2024
Aiwa

Aiwa SP-A100 Bedienungsanleitung

16 Oktober 2024
Trust

Trust GXT 628 Bedienungsanleitung

15 Oktober 2024
Pyle

Pyle PBMSPG6 Bedienungsanleitung

15 Oktober 2024
Marshall

Marshall Tufton Bedienungsanleitung

15 Oktober 2024
Sunstech

Sunstech SPUBT780 Bedienungsanleitung

15 Oktober 2024