JBL Synthesis SCL-6 Bedienungsanleitung

JBL Lautsprecher Synthesis SCL-6

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für JBL Synthesis SCL-6 (2 Seiten) in der Kategorie Lautsprecher. Dieser Bedienungsanleitung war für 16 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/2
JBL SCL-6
2.5-Way Quadruple 5.25-inch (130mm) In-Wall Loudspeaker
The SCL-6 is the largest in-wall model in the expanded in the JBL Synthesis Custom Loudspeaker (SCL) series.
It is designed for deployment in high-performance immersive audio systems in medium to large size rooms. The
SCL-6 features JBLs patented 2410H-2 1-inch (25mm) compression driver mated to a High Definition Imaging
(HDI) horn. This patented horn design is integrated with four 5.25-inch (130mm) Advanced Aluminum Matrix
cone cast-frame woofers into a precision molded baffle assembly. The configuration yields incredibly smooth and
consistent performance for in-wall LCR or surround applications. Premium components are used throughout the
crossover network including a boundary gain adjustment switch while high-quality gold-plated push type speaker
terminals ensure a secure connection. Installation is simple and quick with the new Cat Claw mounting mechanism
that allows the speaker to be securely clicked into place freeing up two hands for tightening it down flush and level
to the wall. A zero bezel magnetically attached grille is included and can be painted to match any décor. The SCL-6
is acoustically designed to match any of the JBL Synthesis Custom Loudspeakers (SCL series) as part of a complete
JBL Synthesis immersive audio solution.
© 2021 HARMAN International Industries, Incorporated. All rights reserved. JBL and JBL Synthesis are trademarks
of HARMAN International Industries, Incorporated, registered in the United States and/or other countries. Features,
specifications and appearance are subject to change without notice.
HARMAN International Industries, Incorporated
8500 Balboa Boulevard, Northridge, CA 91329 USA
www.jblsynthesis.com
Highlights:
2.5-way in-wall loudspeaker system designed for on-axis
listening as LCR and surround channels
1-inch 2410H-2 compression driver tweeter mated to a
JBL patented High-Definition Imaging (HDI) horn precision
molded baffle assembly
Four 5.25-inch (130mm) Advanced Aluminum Matrix cone
cast frame woofers
• Can be mounted vertically or horizontally
• Patented Cat Claw installation mechanism
• Gold plated, spring-loaded binding posts
• Includes paintable zero-bezel, magnetically attached grilles
• Compatible with WB54 pre-construction bracket
General Specifications:
Type: 2.5-way in-wall loudspeaker
Low Frequency Driver: Four 5.25" (130mm) advanced Aluminum Matrix
cone cast-frame woofers (JW13Al-4)
High Frequency Driver: 1" (25mm) 2410H-2 Teonex® annular
ring-diaphragm compression driver
Recommended Amplifier Power: 25 – 200W RMS
Impedance: 4 Ohm
Loudspeaker Sensitivity: 91dB/2.83V/1m
Frequency Response: 50Hz – 30kHz (-6dB on-axis), 2pi anechoic
Crossover Frequency: 1.8kHz
High Frequency Coverage Angle (-6dB): 80° Vertical/80° Horizontal,
from 2kHz to 17kHz
Enclosure Type: Open back
Controls: Boundary Proximity Control
Grille Dimensions: 7.29" (185mm) x 31.32" (796mm)
Product Dimensions (with grille):
7.29" (185mm) x 31.32" (796mm) x 3.82" (97.1mm)
Cut-out Dimensions: 30.18" (766mm) x 6.18" (157mm)
Rough-in Bracket: WB54
Mounting Depth: 3.63" (92mm)
Input Type: Gold-plated spring-loaded binding posts
Product Weight: 22.2 lbs (10.07kg)
Shipping Weight: 25.6 lbs (11.61kg)
Shipping Units of Measure: Each
Warranty: 5 Years
JBL SCL-6
2.5-Way Quadruple 5.25-inch (130mm) In-Wall Loudspeaker


Produktspezifikationen

Marke: JBL
Kategorie: Lautsprecher
Modell: Synthesis SCL-6

Brauchst du Hilfe?

Wenn Sie Hilfe mit JBL Synthesis SCL-6 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Lautsprecher JBL

Bedienungsanleitung Lautsprecher

Neueste Bedienungsanleitung für -Kategorien-