JBL Studio LS 360C Bedienungsanleitung

JBL Lautsprecher Studio LS 360C

Lesen Sie kostenlos die đź“– deutsche Bedienungsanleitung fĂĽr JBL Studio LS 360C (8 Seiten) in der Kategorie Lautsprecher. Dieser Bedienungsanleitung war fĂĽr 15 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/8
LS360C
STUDIO
™
SERIES
OWNER’S GUIDE
For more than 60 years, JBL has been involved in every aspect of music and
film recording and reproduction, from live performances to the recordings you
play in your home, car or office.
The LS360C has been specifically designed to deliver unsurpassed home theater
sound reproduction from an in-ceiling speaker that does not intrude on your
room or its décor.
Please take a moment to register your product on our Web site at www.jbl.com.
It enables us to keep you
posted on our latest advance
ments, and helps us to
better understand our customers and build products that meet their needs and
expectations.
UNPACKING THE SPEAKERS
Carefully unpack the speakers. If you suspect damage from transit, report it
immediately to your dealer and/or delivery service. Keep the shipping carton
and packing materials for future use. All models include a mounting template
and paint shield.
PLANNING YOUR SYSTEM
Figure 3. This overhead view shows a 6- or 7-channel home theater system
arrangement. Left/right rear channels are for a 7-channel system. Center
rear channel is for a 6-channel system.
NOTE: A JBL powered subwoofer will add impact and realism to both
music and film soundtracks. Contact your JBL dealer for recommendations
on subwoofer models for your application.
Sofa
Left
Surround
Channel
Right
Surround
Channel
Left Rear
Channel
Right Rear
Channel
Center Rear
Channel
JBL Subwoofer
(optional)
Left Front
Channel
Right Front
Channel
Center Channel
(above TV)
Sofa
Left
Surround
Channel
Right
Surround
Channel
JBL Subwoofer
(optional)
Left Front
Channel
Right Front
Channel
Center Channel
(above TV)
Figure 2. This overhead view shows a typical home theater
system arrangement.
Sofa
JBL Subwoofer
(optional)
Left Front
Channel
Right Front
Channel
Figure 1.
THANK YOU FOR CHOOSING JBL
2
3
PLACEMENT
NOTE: In all applications, the tweeter and dual midrange drivers should be
aimed toward the listening area.
STEREO
Before deciding where to place your speakers, survey your room and think
about placement, keeping the following points in mind, and using Figure 1,
on previous page, as a guide:
• For best results, place the speakers 6'–8' apart.
• Refer to “Home Theater” below if you also plan to use the speakers in
a home theater system.
HOME THEATER
For front-channel use, place one speaker on the left and another on the
right along either side of the television.
A center channel speaker should go directly above the television. For left
and right surround channels, place one speaker on the left and another
on the right, to the side of or slightly behind the listening area. In 6- or
7-channel configurations, place the rear channel(s) behind the listening
position, as shown in Figure 3.
NOTE: A JBL powered subwoofer will add impact and realism to both
music and film soundtracks. Contact your JBL dealer for recommendations
on subwoofer models for your application.
Proper placement of the speakers is an important step in obtaining the most
realistic soundstage possible. These recommendations are for the optimal
placement of the loudspeakers. Use these placement recommendations as
a guide. Slight variations will not diminish your listening pleasure.
INSTALLATION
NOTE: The LS360C in-ceiling speaker was designed to be easily installed.
However, if you are unable to clearly and fully understand and follow the
instructions in this manual, or if you are unsure of your ability to properly
install these loudspeakers, please contact your dealer or a qualified installer.
TOOLS NEEDED
Phillips #2 screwdriver
(Do not use a powered screwdriver
of any kind)
Measuring tape Utility knife
Pencil
Carpenter’s level Awl
CONNECTION TIPS
SPEAKER CONNECTIONS
Wire Length Recommended Size
Up to 100 ft. 16-gauge
Greater than 100 ft. 12-gauge
TURN OFF ALL POWER
Before completing the installation, you must connect your speakers to your
system. First, turn off all audio-system power. Use high-quality speaker wire
to make your connections. Use at least #16-gauge speaker wire with polarity
coding. Heavier-gauge wire is recommended for larger distances. Consult the
chart above or your dealer for recommendations. The side of the wire with a
ridge or other coding is usually considered positive (+) polarity. Also, consult
the owner’s manuals that were included with your amplifier or receiver to
confirm connection procedures.
Observe polarities when making speaker connections, as shown in Figure 4.
Connect each + terminal on the back of the amplifier or receiver to the
respective + (red) terminal on each speaker. Connect the – (black) terminals
in the same way.
IMPORTANT!
Do not reverse polarities (i.e., + to – , or – to +) when making connections.
Doing so will cause poor imaging and diminished bass response. Be certain
that positive and negative wire strands are completely isolated to avoid short
circuits that may damage your equipment.
Figure 4.


Produktspezifikationen

Marke: JBL
Kategorie: Lautsprecher
Modell: Studio LS 360C

Brauchst du Hilfe?

Wenn Sie Hilfe mit JBL Studio LS 360C benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Lautsprecher JBL

Bedienungsanleitung Lautsprecher

Neueste Bedienungsanleitung fĂĽr -Kategorien-