JBL PD5200 Bedienungsanleitung

JBL Lautsprecher PD5200

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für JBL PD5200 (2 Seiten) in der Kategorie Lautsprecher. Dieser Bedienungsanleitung war für 15 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/2
PD5200/43
Specifications:
Frequency Range1(-10 dB): 200 Hz to 18 kHz
Frequency Response1(±3 dB): 240 Hz to 16 kHz
Coverage Pattern: 40° x 30°
Directivity Factor (Q): 24.1
Directivity Index (DI): 16.0 dB
Crossover Modes: Bi-amp/Passive switchable
Passive Crossover2: 6th order (36 dB/oct) Linkwitz-Riley HP & LP, 1.7 kHz
Transducer Power Ratings
MF: 350 W (1400 W peak), 100 hrs
(AES)3: HF: 75 W (300 W peak), 2 hrs
Long-Term System Power Passive Mode: 300 W (1200 W peak), 100 hrs.
Rating (IEC)4:
Maximum SPL5: Bi-amp mode: MF: 137 dB-SPL cont avg (143 dB peak)
HF: 135 dB-SPL cont avg (141 dB peak)
Passive mode: 136 dB-SPL cont avg (142 dB peak)
System Sensitivity (1W @ 1m): Passive Mode: 111 dB-SPL
Transducers:
Mid Frequency Driver: CMCD–82H cone mid-range compression driver with integral 200 mm
(8 in) diameter Differential Drive®dual voice coil driver
Nominal Impedance: 8 ohms
Sensitivity6(1W, 1m within 112 dB-SPL
operational band):
High Frequency Driver: 2431H, 38 mm (1.5 in) exit compression driver with mm (3 in)
voice coil
Nominal Impedance: 8 ohms
Sensitivity6(1W @ 1m): 116 dB-SPL
Waveguides: MF: PT-N43MF 600 x 600 mm (24 x 24 in)
HF: PT-H43HF 300 x 300 mm (12 x 12 in)
Physical:
Enclosure: Trapezoidal with 12.5 degree side angles, 16 mm (5/8 in) exterior
grade 11-ply Finnish birch plywood.
Suspension Attachment: 20 points (5 top, 5 bottom, 4 each side, 2 rear), M10 threaded hard-
ware (eyebolts NOT included, see optional accessories).
Finish: Black DuraFlexfinish. White (-WH) available upon request.
Optional Weather Resistant WRC for outdoor placement where the loudspeaker will be sheltered
Versions: from direct exposure to the elements. WRX for direct exposure or
extreme environments, such as tropical or beach, or in areas with salt
air, extreme high humidity or rapid changes in temperature. See
WRC/WRX configuration sheet for details.
Grille: Powder coated 14 gauge perforated steel, acoustically transparent foam
backing (grille cloth backing on white units)
Input Connectors: Neutrik Speakon
®NL4, plus CE-compliant covered barrier strip termi-
nals. Barrier terminals accept up to 5.2 sq mm (10 AWG) wire or max
width 9 mm (.375 in) spade lugs. Speakon in parallel with barrier strip
for loop-through.
Environmental Specifications: Mil-Std 810; IP-x3 per IEC529. For higher environmental ratings, use
WRC or WRX.
Dimensions 991 x 673 x 897 mm
(H x W x D in vertical orientation): (39.0 x 26.5 x 35.3 in)
Net Weight: 69.0 kg (152 lb)
Optional Accessories: 229-00009-01 kit of three M10 x 35 mm forged shoulder steel eyebolts.
1. In bi-amp mode, with recommended active tuning.
2Resultant engineered acoustical response of crossover network and components.
3AES standard, one decade pink noise with 6 dB crest factor within device’s operational band, free air. Standard AES 2
hr rating plug long-term 100 hr rating are specified for low-frequency transducers.
4IEC standard, full bandwidth pink noise with 6 dB crest factor, 100 hours.
5Calculated based on power rating and sensitivity, exclusive of power compression.
6Anechoic sensitivity in free field, no additional sensitivity gains from boundary loading.
JBL continually engages in research related to product improvement. Some materials, production methods and design
refinements are introduced into existing products without notice as a routine expression of that philosophy. For this rea-
son, any current JBL product may differ in some respect from its published description, but will always equal or exceed
the original design specifications unless otherwise stated.
High Output Two-Way
Mid/High Frequency
Loudspeaker
Key Features:
High power 200 mm (8 in) dual-coil CMCD
Cone Midrange Compression Driver provides
high sensitivity and high continuous SPL
capability along with low distortion, extended
bandwidth and improved phase coherence.
Large format neodymium HF driver provides
clear, intelligible high frequency projection.
Large PT™ Progressive Transition™ wave-
guides provide consistent 40° x 30° pattern
control, low distortion at high SPL levels and
smooth frequency response.
Rotatable mid and high frequency wave-
guides allow either horizontal or vertical
cabinet orientation.
Sophisticated, steep-slope passive crossover
network with switchable bi-amp/passive
crossover modes.
Applications:
Performing arts facilities
Live theaters
Auditoriums
Houses of worship
Dance clubs
Sports facilities
PD5200/43 is a Precision Directivity
40° by 30° mid-high frequency loudspeaker
designed for applications requiring high output
capability with excellent pattern control.
The CMCD-82H cone midrange compression
driver consists of a driver/phasing plug assem-
bly providing high output with low distortion.
CMCD-82H’s extended response allows for
smoother transition to the high frequency driver
and the smaller entrance diameter into the
waveguide provides for better pattern control.
The integral 200 mm (8 inch) driver features a
high power Differential Drive®dual voice coil
design. The 2431H large format high frequency
compression driver utilizes a neodymium mag-
net and aluminum diaphragm to deliver clear
and intelligible high frequency projection,
extended frequency response, and low distor-
tion at even the highest drive levels.
Large PT Progressive Transition waveguides
achieve an optimum balance of extremely well
controlled coverage with low distortion, smooth
frequency response, and natural sound charac-
ter. The waveguides are rotatable for cabinet
positioning in either horizontal or vertical orien-
tation. A high-slope crossover network mini-
mizes band overlap and the resulting well-con-
trolled off-axis response enhances arrayability.
The loudspeaker can be operated in either bi-
amplified or in full passive mode. Input connec-
tors include both Speakon®and CE-compliant
covered barrier strip for hookup versatility. The
cabinet is fitted with twenty M10 threaded sus-
pension points, supporting a wide variety of
installation approaches.
PD5200/43 is part of JBL’s broad lineup of
installed sound loudspeakers, complementing
the larger PD700 mid-high cabinets with a more
compact size and supplementing the smaller AE
Series cabinets with higher SPL capability and
larger horns for pattern control to a lower fre-
quency.
JBL Professional
8500 Balboa Boulevard, P.O. Box 2200
Northridge, California 91329 U.S.A.
© Copyright 2004 JBL Professional
A Harman International Company
SS PD5200/43
CRP 5M
10/04
PD5200/43 High Output Two-Way Mid/High Frequency Loudspeaker
100 1000 10000
10
100
Vertical Beamwidth
Horizontal Beamwidth
Frequency (Hz)
360
20 20K
Beamwidth (Degrees)
897 (35.3)
285 (11.2)
12.5˚
991 (39.0)
673 (26.5)
Top
Front Side Back
Measurements obtained in bi-amplified crossover mode.
Dimensions
Beamwidth
Dimensions in mm (in)


Produktspezifikationen

Marke: JBL
Kategorie: Lautsprecher
Modell: PD5200

Brauchst du Hilfe?

Wenn Sie Hilfe mit JBL PD5200 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Lautsprecher JBL

Bedienungsanleitung Lautsprecher

Neueste Bedienungsanleitung für -Kategorien-