JBL PD5125 Bedienungsanleitung

JBL Lautsprecher PD5125

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für JBL PD5125 (1 Seiten) in der Kategorie Lautsprecher. Dieser Bedienungsanleitung war für 16 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/1
PD5125
Specifications: Frequency Range (-10 dB): 37 Hz to 2.5 kHz
Frequency Response (±3 dB): 42 Hz to 2.1 Hz
Transducer Power Ratings 2000 W (8000 W peak) 2 hrs
(AES)1:
Long-Term System Power Rating2 : 1200 W (4800 W peak), 100 hrs.
Sensitivity (1W @ 1m)3 : 50 Hz - 125 Hz 103 dB
125 Hz - 800 Hz 102 dB
Maximum SPL4 : 50 Hz - 125 Hz 136 dB-SPL cont ave (142 peak)
125 Hz - 800 Hz 135 dB-SPL cont avg (141 peak)
Input Modes: Drivers Parallel/Drivers Discrete
Nominal Impedance: 4 ohms in parallel-drive mode
2 x 8 ohms in discrete drive mode
Transducers:
Low Frequency Driver: 2 x JBL 2226H 380 mm (15 in) VGC drivers with 100 mm (4 in) voice
coil
Physical:
Enclosure: Trapezoidal with 10 degree side angles, 16 mm (5/8 in) exterior grade
11-ply Finnish birch plywood
Suspension Attachment: 20 points (5 top, 5 bottom, 4 each side, 2 rear), M10 threaded hard-
ware (eyebolts NOT included, see optional accessories)
Finish: Black DuraFlex finish. White (-WH) available upon request.
Optional Weather Resistant WRC for outdoor placement where the loudspeaker will be sheltered
Versions: from direct exposure to the elements. WRX for direct exposure or
extreme environments, such as tropical or beach, or in areas with salt
air, extreme high humidity or rapid changes in temperature. See
WRC/WRX configuration sheet for details.
Grille: Powder coated 14 gauge perforated steel, acoustically transparent foam
backing (grille cloth backing on white units)
Input Connectors: Neutrik Speakon®NL4, plus CE-compliant covered barrier strip termi-
nals. Barrier terminals accept up to 5.2 sq mm (10 AWG) wire or max
width 9 mm (.375 in) spade lugs. Speakon in parallel with barrier strip
for loop-through.
Environmental Specifications: Mil-Std 810; IP-x3 per IEC529. For higher environmental ratings, use
WRC or WRX.
Dimensions 991 x 476 x 691 mm
(H x W x D in vertical orientation): (39 x 18.75 x 27.2 in)
Net Weight: 53.4 kg (118 lb)
Optional Accessories: 229-00009-01 kit of three M10 x 35 mm forged shoulder steel eyebolts
1AES standard, one decade pink noise with 6 dB crest factor within device’s operational band, free air. Standard AES 2
hr rating plus long-term 100 hr rating are specified for low-frequency transducers.
2AES standard, one decade pink noise with 6 dB crest factor, in cabinet, long-term 100 hr rating.
3Half-space (2 ) loading, average in specified frequency band.
4Calculated based on power rating and sensitivity, exclusive of power compression.
JBL continually engages in research related to product improvement. Some materials, production methods and design
refinements are introduced into existing products without notice as a routine expression of that philosophy. For this rea-
son, any current JBL product may differ in some respect from its published description, but will always equal or exceed
the original design specifications unless otherwise stated.
High Output, Dual 15"
Low Frequency
Loudspeaker
Key Features:
Two high power 380 mm (15 in) low
frequenc y drivers mounted in individual
vented chambers
Low frequency extension to 40 Hz
Enclosure dimensions compatible with all
PD5000 and PD700 models
Applications:
Performing Arts Facilities
Live Theaters
Auditoriums
Houses of Worship
Dance Clubs
Sports Facilities
The PD5125 is a high power low frequency
loudspeaker comprised of two 380 mm (15 in)
VGC™ Vented Gap Cooled low frequency driv-
ers in a front-loaded, vented configuration. The
trapezoidal cabinet is fitted with M10 threaded
suspension points.
It is intended for use as a flown or ground
supported, high power low frequency module
used in conjunction with mid/high or fullrange
systems of the PD5000 and PD700 series.
The PD5125 will perform well in any applica-
tion where high output low bass is required.
Low frequency transducers are the 2226H
380 mm (15 in) VGC Vented Gap Cooled driv-
ers. They deliver excellent low frequency exten-
sion with minimal power compression and low
distortion plus high sensitivity and power han-
dling. Large vent area assures minimal port
compression and low distortion at high output
levels.
Standard finish is black DuraFlex™, with
white available as a no-cost option. Weather
resistant and unpainted versions are also avail-
able. Contact your JBL Professional sales repre-
sentative for information on other available
options.
Dimensions:
SS PD5125
CRP
01/14
JBL Professional
8500 Balboa Boulevard, P.O. Box 2200
Northridge, California 91329 U.S.A.
© Copyright 2014 JBL Professional
www.jblpro.com
Input
Rear
691 (27.2)
Sides
20°
991 (39.0)
476 (18.75)
Top/Bottom
Front


Produktspezifikationen

Marke: JBL
Kategorie: Lautsprecher
Modell: PD5125

Brauchst du Hilfe?

Wenn Sie Hilfe mit JBL PD5125 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Lautsprecher JBL

Bedienungsanleitung Lautsprecher

Neueste Bedienungsanleitung für -Kategorien-