JBL Invader Bedienungsanleitung

JBL Lautsprecher Invader

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für JBL Invader (30 Seiten) in der Kategorie Lautsprecher. Dieser Bedienungsanleitung war für 46 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/30
Document Number: 950-0042 Description: MANUAL, JBL 4.1, All languages
Revision: 06
English
French
Spanish
German
Japanese
Document Number: 950-0042 Description: MANUAL, JBL 4.1, All languages
Revision: 06
Safety Instructions
Please read the following operation precautions before use:
Introduction
The INVADER is the latest innovation from JBL, a long time leader in the manufacture of high-end component and computer audio systems.
JBL’s audio heritage combined with continual research has provided the unique technologies included in the INVADER.
The Harman Multimedia PHOENIX SE transducer is a unique full range transducer designed specifically for small speaker enclosures while
providing significant mid bass. In addition to the bass, the small, rigid and light inverted aluminum cone provides performance that will rival any
tweeter used in multimedia speakers today. The result is an elegant satellite speaker that perfectly integrates with the subwoofer while
providing superior midrange and highs.
The Magnum series subwoofer transducer provides deep bass. This Magnum series of subwoofers are designed specifically to match with the
Harman Multimedia PHOENIX SE transducers. The same approach of providing solid bass from a small Subwoofer enclosure guided the
development of these Magnum transducers.
As described in the Using the speaker system section of the user’s guide, the control knob on the front of the right satellite speaker controls
the system volume level. Rotating the knob clockwise increases the system volume level.
Treble, Bass level adjust knobs are located on front of the subwoofer unit. A system on/off switch is also provided on the rear of the subwoofer
unit. The system includes four desktop speakers and a subwoofer that can be placed either on the floor or on your desk. All satellite speakers
are magnetically shielded to provide the greatest protection against computer monitor image distortion.
Setup
Carefully unpack your speaker system and identify all components:
A Control/Right front Satellite speaker
B Auxiliary/Left front Satellite speaker
C Auxiliary/Left Rear Satellite speaker
D Auxiliary/Right Rear Satellite speaker
E Subwoofer
F Audio Input Cable
G AC Power Cable
Read instructions ---All the safety and operating instructions should be read thoroughly before attempting to operate this audio
system.
Retain instructions for future reference.
Heed warnings --- All warnings on this audio system and in the operating instructions should be adhered to.
Follow instructions --- All operating and use instructions should be followed.
TO PREVENT THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER (OR BACK). THERE ARE NO USER
SERVICEABLE PARTS INSIDE THIS UNIT, PLEASE REFER SERVICING TO QUALIFIED HARMAN MULTIMEDIA
CORPORATION SERVICE PERSONNEL.
Do not expose the speakers to liquid or solvent.
Never remove grille covers in order to service the speaker system. The speaker system does not contain any user serviceable
parts. Refer all servicing to the Harman Multimedia Technical Support Group.
Do not expose the speaker system to temperature or humidity extremes, direct sunlight, excessive dust, or vibrations.
Place the speaker system on a stable, level surface. Do not drop, apply excessive force to the controls, or put heavy object
s on
top of the speaker.
If cleaning is required, use a soft dry cloth. If necessary, use a damp cloth without any solvents.
In order to protect the speaker system, avoid microphone feedback, continuous output from electronic musical instruments, or
distorted output from any signal source.
Do not place the speakers close to fluorescent light sources, or neon light fixtures.
Although the speakers are magnetically shielded, keep magnetic storage media (disks and tapes) at least four inches from the
speaker system in order to avoid data loss.
WARNING: To reduce the risk of fire or electric shock, do not expose this speaker system to rain or moisture
Document Number: 950-0042 Description: MANUAL, JBL 4.1, All languages
Revision: 06
Connect the speaker system as shown in the Connecting the speaker system to sound card illustrations. Once the speaker
system is properly connected, turn on the power switch located on the rear of the subwoofer.
Step 1 Connecting the speaker system to the computer:
If you have an integrated sound solution or a stereo sound card; connect the green connector from the subwoofer into
the green jack on the computer. Do not connect the Black connector to the sound card.
If you have a multi-channel sound card; connect the green connector from the subwoofer into the green jack on the
computer. Connect the black connector to the black jack on your sound card.
If you have a portable computer; connect the green connector from the subwoofer into the headphone jack on the
computer. Do not connect the Black connector to the sound card.
Step 2 Plug the orange connector from the right front /control satellite into the orange jack on the subwoofer.
Step 3 Plug the brown connector from the left front satellite into the brown jack on the subwoofer.
Step 4 Plug the blue connector from the Right rear satellite into the blue jack on the subwoofer.
Step 5 Plug the white connector from the Left rear satellite into the white jack on the subwoofer.
Step 6 Plug the AC plug into the wall outlet.
Step 7 Turn on the speaker set and adjust the volume accordingly.


Produktspezifikationen

Marke: JBL
Kategorie: Lautsprecher
Modell: Invader

Brauchst du Hilfe?

Wenn Sie Hilfe mit JBL Invader benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Lautsprecher JBL

Bedienungsanleitung Lautsprecher

Neueste Bedienungsanleitung für -Kategorien-