JBL CSA 1120Z Bedienungsanleitung

JBL Empfänger CSA 1120Z

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für JBL CSA 1120Z (24 Seiten) in der Kategorie Empfänger. Dieser Bedienungsanleitung war für 18 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/24

CSA 140Z

CSA 180Z

CSA 1120Z

CSA 240Z

CSA 280Z

CSA 2120Z

Commercial Series Ampliﬁer

Operation Manual

JBL Commercial Series

This manual does not include all of the details of design, production, or variation of the equipment. Nor does it cover every pos-

sible situation which may arise during installation, operation or maintenance.

The information provided in this manual was deemed accurate as of the publication date. However, updates to this information

may have occurred.

Trademark Notice: JBL is registered trademark of JBL International. CROWN and DRIVECORE are registered trademarks of

Crown Audio. Other trademarks are the property of their respective owners.

Contents

Important Safety Instructions .......................................................................... 3

JBL DECLARATION OF CONFORMITY .......................................................... 5

1.0 Welcome ................................................................................................... 7

1.1 Features ................................................................................................. 7

1.2 Front Control Panels and Indicators ...................................................... 8

1.3 Rear Panel Controls and Connectors..................................................... 9

2.0 Setup ........................................................................................................10

2.1 Unpacking Your Ampliﬁer ......................................................................10

2.2 Installing Your Ampliﬁer .........................................................................10

2.3 Ensuring Proper Cooling .......................................................................14

2.4 Choosing Input Wire and Connectors ...................................................14

2.5 Output Wiring and Connectors .............................................................15

2.6 Wiring Your Audio System .....................................................................16

2.7 Connecting to AC Mains .....................................................................17

2.8 Protecting Your Speakers .....................................................................17

2.9 Startup Procedure .................................................................................17

3.0 Operation ..................................................................................................18

3.1 Precautions .............................................................................................18

3.2 High-Z Switch .........................................................................................19

3.3 Remote Volume Control ..........................................................................19

3.4 Sleep Mode ............................................................................................19

4.0 Troubleshooting ........................................................................................20

Appendix A: Target Performance Speciﬁcations ............................................21

Appendix B: Contact Information ....................................................................22

IMPORTANT SAFETY INFORMATION

WARNING FOR YOUR PROTECTION

READ THE FOLLOWING:

KEEP THESE INSTRUCTIONS

HEED ALL WARNINGS

FOLLOW ALL INSTRUCTIONS

THE APPARATUS SHALL NOT BE EXPOSED TO DRIPPING OR

SPLASHING LIQUID AND NO OBJECT FILLED WITH LIQUID, SUCH

AS VASES, SHALL BE PLACED ON THE APPARATUS

CLEAN ONLY WITH A DRY CLOTH.

DO NOT BLOCK ANY OF THE VENTILATION OPENINGS. INSTALL IN

ACCORDANCE WITH THE MANUFACTURER’S INSTRUCTIONS.

DO NOT INSTALL NEAR ANY HEAT SOURCES SUCH AS

RADIATORS, HEAT REGISTERS, STOVES, OR OTHER APPARATUS

(INCLUDING AMPLIFIERS) THAT PRODUCE HEAT.

ONLY USE ATTACHMENTS/ACCESSORIES SPECIFIED BY THE

MANUFACTURER.

UNPLUG THIS APPARATUS DURING LIGHTNING STORMS OR

WHEN UNUSED FOR LONG PERIODS OF TIME.

Do not defeat the safety purpose of the polarized or grounding-type

plug. A polarized plug has two blades with one wider than the

other. A grounding type plug has two blades and a third grounding

prong. The wide blade or third prong are provided for your safety. If

the provided plug does not fit your outlet, consult an electrician for

replacement of the obsolete outlet.

Protect the power cord from being walked on or pinched particularly

at plugs, convenience receptacles, and the point where they exit from

the apparatus.

Use only with the cart stand, tripod bracket, or table specified by the

manufacture, or sold with the apparatus. When a cart is used, use

caution when moving the cart/apparatus combination to avoid injury

from tip-over. Refer all servicing to qualified service personnel.

Servicing is required when the apparatus has been damaged in any

way, such as power-supply cord or plug is damaged, liquid has been

spilled or objects have fallen into the apparatus, the apparatus has

been exposed to rain or moisture, does not operate normally, or has

been dropped.

POWER ON/OFF SWITCH: For products provided with a power

switch, the power switch DOES NOT break the connection from the

mains.

MAINS DISCONNECT: The plug shall remain readily operable. For

rack-mount or installation where plug is not accessible, an all-pole

mains switch with a contact separation of at least 3 mm in each pole

shall be incorporated into the electrical installation of the rack or

building.

FOR UNITS EQUIPPED WITH EXTERNALLY ACCESSIBLE FUSE

RECEPTACLE: Replace fuse with same type and rating only.

MULTIPLE-INPUT VOLTAGE: This equipment may require the use

of a different line cord, attachment plug, or both, depending on the

available power source at installation. Connect this equipment only

to the power source indicated on the equipment rear panel. To reduce

the risk of fire or electric shock, refer servicing to qualified service

personnel or equivalent.

If connected to 240V supply, a suitable CSA/UL certified power cord shall

be used for this supply.

SAFETY INSTRUCTIONS

NOTICE FOR CUSTOMERS IF YOUR UNIT IS EQUIPPED WITH A

POWER CORD.

WARNING: THIS APPLIANCE SHALL BE CONNECTED TO A MAINS

SOCKET OUTLET WITH A PROTECTIVE EARTHING CONNECTION.

The cores in the mains lead are colored in accordance with the following code:

GREEN and YELLOW - Earth BLUE - Neutral BROWN - Live

As colours of the cores in the mains lead of this appliance may not cor-

respond with the colored markings identifying the terminals in your plug,

proceed as follows:

• The core which is colored green and yellow must be connected to the

terminal in the plug marked with the letter E, or with the earth symbol, or

colored green, or green and yellow.

• The core which is colored blue must be connected to the terminal marked

N or colored black.

• The core which is colored brown must be connected to the terminal

marked L or colored red.

This equipment may require the use of a different line cord, attachment

plug, or both, depending on the available power source at installation. If

the attachment plug needs to be changed, refer servicing to qualified ser-

vice personnel who should refer to the table below. The green/yellow wire

shall be connected directly to the units chassis.

CONDUCTOR WIRE COLOUR

Normal Alt

L LIVE BROWN BLACK

N NEUTRAL BLUE WHITE

E EARTH GND GREEN/YEL GREEN

WARNING: If the ground is defeated, certain fault conditions in the unit or

in the system to which it is connected can result in full line voltage between

chassis and earth ground. Severe injury or death can then result if the chassis

and earth ground are touched simultaneously.

The symbols shown above are internationally accepted symbols

that warn of potential hazards with electrical products. The light-

ning flash with arrow point in an equilateral triangle means that

there are dangerous voltages present within the unit. The exclama-

tion point in an equilateral triangle indicates that it is necessary for

the user to refer to the owner’s manual.

These symbols warn that there are no user serviceable parts inside

the unit. Do not open the unit. Do not attempt to service the unit

yourself. Refer all servicing to qualified personnel. Opening the

chassis for any reason will void the manufacturer’s warranty.

Do not get the unit wet. If liquid is spilled on the unit, shut it off

immediately and take it to a dealer for service. Disconnect the unit

during storms to prevent damage.

Produktspezifikationen

Marke:	JBL
Kategorie:	Empfänger
Modell:	CSA 1120Z
Breite:	218.5 mm
Tiefe:	303.4 mm
Gewicht:	3100 g
Produktfarbe:	Schwarz
Übertragungstechnik:	Kabelgebunden
Höhe:	43.3 mm
Zweck:	Haus
RMS-Leistung:	120 W
AC Eingangsspannung:	100 - 240 V
AC Eingangsfrequenz:	50 - 60 Hz
Lautstärkeregler:	Drehregler
Betriebstemperatur:	0 - 35 °C
Relative Luftfeuchtigkeit in Betrieb:	0 - 95 %
Paketgewicht:	4500 g
Zertifizierung:	CE, FCC
Temperaturbereich bei Lagerung:	-20 - 85 °C
Audio Kanäle:	1.0 Kanäle
THD, totalklirren:	- %
Rauschverhältnis (SNR):	100 dB
Frequenzbereich:	20 - 20000 Hz
Ein-/Ausschalter:	Ja
Nachhaltigkeitszertifikate:	RoHS, ENERGY STAR
Eingang Empfindlichkeit:	1400 mV
Synchronisations-Eingangsimpedanz:	50000 Ohm
Lautsprecher-Konnektivitätstyp:	RCA
Leistungshöhepunkt pro Kanal:	- W
Line-Eingänge (RCA):	2
Übersprechen (1 kHz):	70 dB